2. Auto-line XL, XLE & XL-Lintra
The Sparkler Auto-Line filter is a continuously operating automatic self-cleaning filter. The
filtration principle is based on a asymmetric edge gap element where the particles are retained
on the inside of the filter element. In the cleaning cycle the particles are scraped to a sludge
chamber which can be drained at appropriate intervals. The Auto-line filter is operated by a
PLC or by a pneumatic controller. The Auto-line XLE and XL-Lintra are special models, which
are developed to protect the cylinder for possible product contamination. The Auto-line XLE is
an extended version and the Auto-line XL-Lintra a external one. The latter one is chosen when
height is limiting. These versions are the preferred models when filtering products like organic
solvents, polymers, adhesives etc.
The Sparkler Auto-line XL models are manufactured in stainless steel 316L.
The design accommodates the standard and regulations for pressure vessels
PED 97/23 with CE marking. The filter is delivered complete with PLC and
automated drain valve, ready for installation.
Design pressure 16 bar
Test Pressure: 24 bar
Max. Differential pressure: 3,0 bar
Design temperature: 80°
C, 120°
C (150°
C)
Volume: 35 liter
Weight. 95 kg
Electricity requirement: 240VAC/50Hz
Pneumatic requirement: 5-7 bar, filtered air
Connections: Flange DN 100 DIN 2633
Drain: Rp 1, Rp1½, Rp 2
Retention sizes: 30-50-75-100-150-300-500-1000 micron
Standard available strainers are marked underlined.
Capacity
(For liquids with a
viscosity of 1 cSt)
Capacity in m
3
/hDifferential
pressure
bar
Filtration
area
cm
2
30µ 50µ 100µ 150µ 300µ 500µ 1000µ
0.05 3300 27 30 50 54 54 54 54
0.10 3300 39 44 68 72 72 72 72
0.15 3300 47 54 84 88 90 90 90
0.20 3300 52 62 100 105 110 110 110