This document contains the resume of Salah Abd Elmonsef, a mechanical engineer with 13 years of experience in piping, tank, duct, and plate design, layout, material selection, stress analysis, fabrication, and erection. He has worked on oil and gas, power, and petrochemical projects. His skills include AutoCAD, Autodesk Inventor, SolidWorks, PROSTRUCTURES, AutoPIPE, Microsoft Office, and he is a beginner in SolidEdge and PDMS. He is seeking a position at an organization that empowers employees with knowledge and encourages teamwork.

1. SalahAbdElmonsef
SALAH ABD ELMONSEF
salah.elmonsef@gmail.com
Mobile‐Phone: +2‐01066602346 & +2‐
01225619234
Profile
Mechanical engineer having 13 years’ experience in (piping, Tank, Duct, Plate Work) design, layout
,Material, stress analysisandsohavingexperiencein (piping, Tank, Duct, PlateWork) constructionincluding
fabrication and erection, Familiar with standards and codes like ASME / ANSI, AISC
Fields
Oil& Gas, Power station and Petrochemical industry projects.
Having awareness of human and project safety especially live gas works.
Work well under pressure and achieve required jobs in the optimum time.
Anorganizationthatempowersitsemployeeswithknowledgeencouragesteamwork,have flexibilityin
communicationbetweenteam-groupandhave enoughspace to fully employ my experience & skills.
I am equallyeagertoacquire the necessaryexperience.
PERSONAL INFORMATION
Date of birth: 01-08- 1978
Place of birth: Cairo,
Egypt Nationality: Egyptian.
Gender: Male.
Address: Shubra-Cairo
Social Status: Married
Military Service: Completed.
EDUCATION
University Degree B.Sc.
Engineering. University Cairo University.
Faculty Engineering.
Major Mechanical Design
Engineering. General Grade GOOD.
Graduation Year 2002.
KEY SKILLS
ComputerSkills.
- Powerful knowledge forthe followingprograms.
 AutoCAD2D&3D.

2. SalahAbdElmonsef
 AutodeskInventor.
 SolidWorks.
 ProStructuresV8i.
 BentleyAutoPIPE.
 MicrosoftOffice (Word–Excel – Powerpoint– Outlook –Etc...)
 AUTO PIPE.
- Beginneruserforthe followingprograms
 SolidEdge.
 PDMS.
Other Skills.
o Good communication skills & ability to work in a team and maintain good relationship
with colleagues.
o Very good analysis and troubleshooting abilities
o Ready to Work In Multinational Culture Environment.
Language Skill.
Arabic Mother tongue
English Good reading, writing, & speaking
Certificates
o AUTOCAD 2D&3D.
o SOLID WORK.2009Advanced Course From.7/11/2009 to 5/12/200
o Material Selection For Industrial Products According to ASME Section II
From 28-11-2010 to 2-12-2010.
Memberships
o Institute of Mechanical Engineers.
EMPLOYMENT
1. From Sep-2014 till Now at JICON.
- lead the team of Technical Office Engineers
- Egyptian Refining Company (ERC) Project as Assistance Manger.
JOB RESPONSIBILITIES
- Creating fabrication drawings by Auto Spool Program.
- lead the team of Technical Office Engineers, Quantity Surveying Engineers, Material Engineers to
Review the project’s design drawings, in order to implement the shop drawing designs, quantity
Surveying systems and material management systems and procedures.
- Organize and direct the staff and activities concerned with the technical office department and
Maintenance of the structures passed on work activities and load.
- Manage shop drawing team to produce project’s shop drawings in a timely and accurate manner
And getting consultant approval.
- Follow up with Construction team to solveall technical problems that may arise during
Construction.

3. SalahAbdElmonsef
- Manage Quantity surveying team in the issuance of bill of quantities, payment approvals and change
Orders in a timely and accurate manner. Ensure an effective material management process relating
To, submittals approval process, control, storage and distribution of materials according to the
Projects’ needs. Ensure proper distribution of all updated & approved project documents to all
Project concerned parties to keep them all updated. Review and approve scheduled bill of
Quantities, request for information (RFI) and subcontractors’ invoices.
- Support Planning and Cost Control Department in monitoring monthly construction progress.
- Prepared material take off (MTO) and Specifications for Piping Specialty Items, Special Piping
Items.
- Update piping specifications based on client’s comments or based on new project requirements.
- Reviewed and checked the consistency between ISO drawings and P&ID.
- Identification,calculation and design ofsuitable standard or special pipe supports.
- Creating weekly and monthly progress for the management.
- Review of basic engineering data/documents of EPC contractors.
- Handling all sort of Piping Modification/ Revamping work with structural Modification and
Structural Support Modification and connection to Mechanical Equipment’s (Static, Rotating,
Pump, Compressor, Blower etc.)
2. Senior TechnicalOffice Engineer
DSD FERROMETALCO COMPANY, CAIRO, EGYPT www.ferrometalco.com
A MULTINATIONAL COMPANY, ENGINEERING – MANFACTURING - CONSTRUCTION.
DEC 2006 > SEP 2014
Achievements.
 Co-ordination of design & drawings with Client and Consultant Preparation & submission of detailed
drawings & shop drawings.
 Preparing material take-off requirements and isometric drawings for construction using 3D CAD
Modeling software
 Mechanical Design and Detailing Engineer (Tank – piping – Duct - mech. equipment).
 Review all basic drawings, specifications, material for the new projects.
 Prepare Modeling Drawings, Material list.
 Prepare and issuing the requisitions for Material.
I have participated in these projects in [DSD] company:
A- TECHNICAL OFFICE ENGINEER -ELTEBIN THERMAL POWER PLANT(2*350MW)
B- SENIOR TECHNICAL OFFICE ENGINEER THERMAL POWER PLANT(2*650 MW)
- Prepare Piping fabrication, spooling and material listAccording to ASME B31.1.
- Handling all sort of Piping Modification/ Revamping work with structural Modification and
Structural Support Modification and connection to Mechanical Equipment’s.
- Identification, calculation and design of suitable standard or special pipe supports.
- Prepare isometric drawings for small pore piping from layout and P&ID.
- Preparing material take‐off Requirements and isometric Drawings for construction.
- Preparation of all Technical Documents Drawings Co‐ordination of design & drawings with
Client and Consultant.
- Prepare MTO. For Hydraulic and Pneumatic circuit.
- Prepare valve type list for Hydraulic and Pneumatic circuit.
- Prepare piping layout and P&ID for Hydraulic and Pneumatic circuits.
- Selection of hydraulic pump, blowers and screw air compressors.
- Preparing and issuing the study of Lifting Plan.
- Prepare material card.

4. SalahAbdElmonsef
C- S T O RA GE TANK- Uhde Project EHC Egypt LDAN.
- NH3 Storage TANK.
- Desalinated Water Tank.
- NITRIC Acid Tank.
D- CIRCULAR DUCT- Uhde Project EHC Egypt LDAN.
- Review all design drawings, specifications, material.
- Preparing material take‐off requirements and modeling drawings for construction
And issued detailed Drawings for fabrication.
E- AZE PROJECT (REVERSE ENGINEERING FOR COVER& PANEL OF FURNACE).
- Preparing fabrication drawings & part list from layout and by reverse engineering.
- Preparing BOM for plates and piping and nozzles & supports and Mechanical components.
F- SUEZ THERMAL POWER PLANT (1*650 MW).
- Review all design drawings, specifications, material for (Gas Duct – Air Duct – Air Heater)
- Internal Piping (Spool List –Fabrication ISO Drawings – Erection ISO Drawings ‐ Welding Map‐
Part List ‐ Cutting list– sketch for transportation ‐).
- Creating weekly and monthly progress for the management
- Review of basic engineering data/documents of EPC contractors.
G- GAMESA WIND POWER TOWERS.
- Checking client drawings and calculations.
- Preparing fabrication drawings & part list
H- Pressure Vessels.
Fabrication workshops monitoring Carbon steel and follow all the steps
Mentioned above but in the construction of pressure piping& vessels.
This a period has advised me to understand the Equipment Drawings
And its connections so these vessels is an important parts of piping systems.
3 - FROM OCTOBER2003 TILL MARCH2006
JAC Power Group Company
POSITION:
Mechanical Design Engineer.
JOB RESPONSIBILIES:
- Review all design drawings, specifications, material.
- Preparing material take‐off requirements and modeling &fabrication drawings.
REFERENCES
References are available on request.