Motor Control Altistart 01 Briefing
•Télécharger en tant que PPTX, PDF•
1 j'aime•352 vues
Soft starter overview for simple applications and a look at the product offer. For more information: http://www.schneider-electric.com/en/product-range/779-altistart-01?parent-category-id=2900
Recommandé
Recommandé
Contenu connexe
Plus de Schneider Electric
Plus de Schneider Electric (20)
Dernier
Dernier (20)
Motor Control Altistart 01 Briefing
- 1. Altistart 01 Soft starter briefing Property of Schneider Electric Simply reliable. Simply available. December 2017
- 2. • Introduction: Altistart offer • Altistart 01 Products offer Applications • Where to find further details • Quiz Table of content Agenda Page 2Property of Schneider Electric |
- 3. Altistart — Soft starters offer overview Page 3Property of Schneider Electric | ATS 48 200 V – 690 V 0.37 kW 4 kW 15 kW 315 kW 900 kW Functionality ATS22 200 V – 600 V ATS01 200 V – 480 V Altistart 01 Compact simple applications 3 to 85 A Altistart 22 Bypass inside, pump and fans 17 to 490 A Altistart 48 General purpose, high cycling, TCS 17 to 1200 A
- 4. • One-phase control • Bypass inside • Start management - Torque • 1- and 3-phase motors • Two-phase control • Bypass inside • Start management - Torque and current • Voltage ramp control • Boost • Unique • Features ~ N2 model • Advantage of TeSys U Altistart 01 — Products offer Page 4Property of Schneider Electric | N1 N2 N2+ Tesys U
- 5. Altistart 01 — Soft starters for simple applications Page 5Property of Schneider Electric | The range • From 0.75 kW to 15 kW • 200 V to 480 V (3 phases) • IP20 Targeted application Pump, fan, compressor, small conveyors: • Water distribution, boosters • Ventilation, HVAC • Compressors for refrigeration Customer value • Friendly: no parameter (2 – 3 potentiometers) • Efficient: very compact • Ready to use: plug-and-play, bypass inside, direct mounting on DIN rail • Open: consistent with TesysTM U motor protection
- 6. • Small compressors • Small conveyors • Fans • Automatic doors • Fans • Pumps • Conveyors • Car wash • Fans • Pumps • Conveyors • Car wash • Complex system Altistart 01 — Softstarter applications Page 6Property of Schneider Electric | N1 (1 phase) N2 (2 phase) N2+ Tesys U 0.37 to 11 kW 0.75 to 15 kW 0.75 to 15 kW
- 7. • Click here to find info on SE.com • Click here to find Altistart 01 on SE.com • Click here to access our Digicat • Click here to access to CAD files • Click on the link below for FAQs (frequently asked question) Where to find details Page 7Property of Schneider Electric |
- 8. Property of Schneider Electric | Quiz Based on what you’ve learned so far, try to answer to this quiz ? Page 8 What are the 3 categories of Altistart? Q1 Is Altistart 22 driving up to 450 A? Q2 Is a software needed to commission Altistart 01? Q3 Is there an integrated bypass in Altistart 01? Q4
- 9. Property of Schneider Electric | Quiz answers Page 9 Answers What are the 3 categories of Altistart? Q1 AST48 , ATS22 , ATS01 Is Altistart 22 driving up to 450 A? Q2 Yes, Altistart range is from 17 to 490 A Is a software needed to commission Altistart 01? Q3 No, there is no parameter, only 2 or 3 potentiometers Is there an integrated bypass in Altistart 01? Q4 Yes, there is a bypass inside
- 10. Thank you Page 10Property of Schneider Electric |
Notes de l'éditeur
- ATS01N1: This Softstarter is equipped of a bypass (except ATS01N103) Reduces torque, not current Needs contactor when used on 3 phase motors External control supply ATS01 N1 are equipped with: Potentiometer 1 for setting the starting time (0-5s) Potentiometer 2 for adjusting the start voltage threshold according to the motor load Green LED ATS supplied Yellow LED motor is powered at nominal voltage Control supply: 24Vac or 110…240 Vac ATS01N2: Soft Start/Soft Stop with bypass Reduces current peak during start-up Internal Power supply Delta wiring are possible Better control of the voltage ramp Boost function Logic output: default relay/end of start ATS01 N2 are equipped with: Potentiometer to set the starting time (0-10s) Potentiometer to set the deceleration time Potentiometer to set the start voltage (threshold according to the motor load) Green LED ATS supplied Yellow LED motor is powered at nominal voltage Control connector: 2 logic inputs Run/Stop commands, 1 LI BOOST function, 1 LI end of starting, 1 relay power supply fault or the motor has reached a standstill at the end of the deceleration stage ATS01N2+ TeSys Same features as ATS01N2 External Control Power Benefits of ATS01+TeSys are Modular product Up to 60% wiring reduction Last Minute definition of Power, Protection, Control, through Power Suite and SoMove Communication: As-i, Modbus … Information of machine states (Load management) Alarms Integrated function for simple applications (pump...) Reverser option.