Lineair heat detection can come in many ways. One of the solutions is to meassure temperatures with fiber optic sensing cable. The technology is called Distributed Temperature Sensing. Bandweaver offers a wide range of solution for different situations like with escalators. fire detection with a fiber optic cable is low in maintenance, low cost of ownership and high reliability. SenseTek is a strategic partner for the fiber optic solution in the Netherlands and is specialist in special fire detection. send an email to sensetek@sensetek.nl
From Event to Action: Accelerate Your Decision Making with Real-Time Automation
SenseTek Bandweaver Escalator fire-detection-dts
1. 1
ESCALATOR FIRE DETECTION USING DISTRIBUTED
TEMPERATURE SENSING
Escalators form a vital means for the convenient movement of people to and from large complex buildings. As such,
escalators can form an integral part of the escape strategy, when a building is in a state of emergency. It is not the
purpose of this application note to define whether an escalator should be used for the purpose of evacuation of
personnel form a building in an emergency but rather demonstrate the usefulness of utilizing distributed temperature
sensing monitoring systems as a linear heat detection system for escalator fire detection.
There are many factors to consider when instigating a process of the possible adoption of escalators for emergency
evacuation for fire and certain non-fire incidents, such as Imminent Catastrophic Events (ICE). It is vital that the
escalators and associated emergency egress routes are available at all times for their safe usage.
In light of the above, the main fire risks associated with escalators are due to:
› Faulty electrical equipment used to control the escalator movement and direction
› Roller bearings failure over time, which may lead to local overheating
› Associated hot works which may routinely be carried out in close proximity to the escalator
› Build up of flammable materials discarded by personnel
Bandweaver’s solution to this problem is to deploy a FireLaser distributed temperature sensor control unit to provide
heat detection in close proximity to the escalator, or indeed a number of escalators. The sensing cable is located in close
proximity within the escalator, thereby providing “local” fire protection.
Abberdaan 162 │1046 AB │ Amsterdam │ T: +31 (0)20-6131611 │ F: +31 (0)20-6132212 |www.sensetek.nl │ info@sensetek.nl
2. 2
The figure below illustrates an example layout of the fiber optic sensing cable where the escalator is divided into a
number of detection zones. In reality, the number of zones will vary from installation to installation and be dependent
upon escalator length, defined risk and the associated fire mitigation strategy.
Escalator Fire Detection System Zones
In this example the sensor control unit is programmed with multiple detection zones, along the length of the escalator
and including the “end zones”. These areas at either end of the escalator are typically higher risk as they are often the
site for electrical equipment and are often the areas most prone to collecting discarded materials. Generally, each
detection zone has an associated output relay, which is turn connected to the main Fire Alarm Control Panel FACP. In
installations where an associated deluge system is deployed, the relay contacts may be connected to an Agent Release
Panel. The diagram illustrates how an Agent Release Panel may be configured to activate a zonal based deluge release
system into four separate fire detection/deluge release zones.
The sensor cable (shown in blue) is installed between the local Remote Splice Enclosure, located closely to the escalator
in question. Individual lengths of the sensor cable can be configured to be included within separate fire detection zones:
Zone 1 = D4 to D5
Zone 2 = D3 to D4 plus D5 to D6
Zone 3 = D2 to D3 plus D6 to D7
Zone 4 = D1 to D2 plus D7 to D8
Abberdaan 162 │1046 AB │ Amsterdam │ T: +31 (0)20-6131611 │ F: +31 (0)20-6132212 |www.sensetek.nl │ info@sensetek.nl
3. 3
D1 to D8 equate to distance measurements from the FireLaser distributed temperature sensing solution, when viewed
on the temperature profile as indicted in Figure 2. Temperature profiles are rapidly and continuously calculated by the
FireLaser distributed temperature sensor system, and the sensor control unit determines if there is an alarm decision.
The system continuously monitors for background fault type events. Alarm signals are communicated to the Fire Alarm
Control Panel or Agent Release Panel via relay contacts. Sensor cable which is not contained within the local asset to be
monitored is effectively programmed to not give alarm thus rendering this “transit cable” as non-reacting.
Temperature Profile Indicating Zone Boundaries
Abberdaan 162 │1046 AB │ Amsterdam │ T: +31 (0)20-6131611 │ F: +31 (0)20-6132212 |www.sensetek.nl │ info@sensetek.nl
4. 4
Approvals
The DTS system is approved to EN54 part 22, heat classification BN, which is a fire detection product standard
classification, which uniquely stipulates a specific test criteria for this “local” application (refer to EN54 part 22 para
3.1.7). The heat classification BN, indicates a normally operating temperature within the local environment of between
40C to 65C, and the alarm activation temperature between 69C to 85C.
About Bandweaver Technologies
Bandweaver has been providing advanced fiber optic monitoring sensors and integrated technologies since 2002.Our
knowledge regarding the application of distributed temperature sensing technology within the fire industry is second to
none. We focus on the safe integration of FireLaser DTS technologies into clients proprietary systems and provide
exceptional systems design support, product support during installation and provide long term maintenance packages.
For further information and system design support please contact our global team at www.bandweaver.com
Or you can contact our local specialized partner in the Netherlands SenseTek Fire & Security Solutions for assistance
with your current project. Call +31(0)20 613 16 11 or send an email to sales@senstek.nl
Abberdaan 162 │1046 AB │ Amsterdam │ T: +31 (0)20-6131611 │ F: +31 (0)20-6132212 |www.sensetek.nl │ info@sensetek.nl