1. Muhammad Shabir Nasir
Instrument & Control Asst Engineer
shabirnasir@gmail.com
+92-333-7248761
CAREER OBJECTIVE STATEMENT
To work with a growing organization offering performance based growth opportunities and
challenging position in an ideal place, where exploring of new areas of knowledge & broad the
vision to take the organization at the highest rank in the world. Where may I obtain new horizon
of learning environment of new technology, broad of vision and routes of experience.
PERSONAL DETAIL:
NAME MUHAMMAD SHABIR NASIR
FATHER S’ NAME NASIR ULLAH AMIN
NIC NO 033301-2094567-7
DATE OF BIRTH 06-03-1982
MARITAL STATUS MARRIED
NATIONALITY PAKISTANI
RELIGON ISLAM
DOMICILE TOBA TEK SINGH
LANGUAGE Urdu /English
E-MAIL shabbir.nasir@ge.com/ shabirnasir@gmail.com
Skype Address shabir.nasir5 @ Skype
Mobile Number +923337248761
Notice Period 1 Month
PRESENT ADDRESS I&C Department 234 MW Muridke Power Station Muridke Road Skp.
EDUCATION & PROFESSIONAL TRAINING

2. Metric: (Science)
Govt MC High School Gojra in 1998
3 Year D.A.E (Instrumentation)
Govt College of Technology Faisalabad in 2001
Degree: Bachelor of Technology (Electronics) B-Tech (Hons)
Preston Institute of Management, Science and Technology Karachi in June 2013
MARK VI, ELC, PATA, EHS Training:
MARK VI, ELC, PATA Training online From GE Energy Portal.
Steam Turbine Training:
SKODA Steam Turbine Training on site.
DCS Training:
Siemens PCS-7 training from Prague SIDAT information Training center.
Swagelok Tube Fitting Guide Training:
Attend Swagelok one day training about theory and Practical Fitting Training at GE
Head Office Lahore.
Certified Scaffold Inspector Training
Attend Certified Scaffold Inspector training in Muridke Power Station .23.24 DEC 2014.
Certified Crane & Rigger Inspector Training
Attend Certified Crane & Rigger training in Muridke Power Station .20.21 APR 2015.
Certified Work at Height & Confined Space Inspector Training
Attend Certified Work at Height & Confined Space training in Muridke Power Station .13.14 JAN
2015
Risk Assessment of Environment Mangement System ISO 14001:2004 Training
Attend above mentioned training at Muridke .07 APRIL 2015
13 Year Professional Experience

3. Organization Position Duration From TO
Muridke Power Plant Asst Engineer
I&C GE(O&M)
6 Year
(Working)
2009 2015
Engro Chemical Pak Ltd Instrument
Professional
4 Year 2005 2009
Engro Chemical Pak Ltd Instrument
Apprenticeship
2 Year 2003 2005
Responsibilities in Muridke Power Projects I&C Assistant Engineer (2009-2015)
 Follow all Operating and maintenance procedure of Gas Turbine, Steam
Turbine,HRSG and Boiler.
 Conduct all Plant Major Equipment’s Trip Investigation based on Trend and Alarm
 Conduct All Critical Trips Root Cause Analysis and suggested its remedy to Prevent
further reoccurrence trip at Plant.
 Safely Implementation of all Facility Improvement Projects.
 Participate in GE Industrial Internet Project.
 Carefully review all Changes in Control Logic before Downloading to CPU.
 Planning and supervising instrument and control related Corrective Maintenance
activities on plant.
 Assist on developing and executing strategies to maintain control systems and
integrity.
 Provide first line troubleshooting and technical support for control and automation
systems including the DCS, PLC, Turbine governor Mark VI and compressor anti
surge control;
 To supervise & execute Safety Critical Activities in compliance with specific
Procedures, work instructions, work plans, inspection and testing schedules for
control systems, including control system.
 Ensure documents, control system architecture, drawings and software backups are
maintained and updated.
 Assist on implementation of the modifications in control systems that may arise from
plant changes or projects known as Facility Improvement Plan;
 Assist on reviewing the control system content of plant modifications and instrument
trip/alarm settings to ensure that plant integrity is not compromised.
 Design objectives and regulatory standards are meet in Gas Turbine Control System
Logic and DCS as well.
 Maintain awareness of developments within the industry in control and instrumented
protective systems hardware, software, strategies, and initiate changes that will
improve the business and System Reliability.
 Always perform work with work permit system.
 Supervise all Instrument related Preventive Maintenance activities
 Spares/stock inventory management of GE Gas Turbine 6FA and Balance of Plant
 Participate in Major Inspection and planning of GE Gas Turbine 6FA.

4.  Assisting GE teams in HGPI, CI, and MI related activities on GE Gas Turbines.
 Submit Purchase Requisitions in IBM Maximo for spares and services.
 Technical review of quotations received for spare and services.
 Consult manufacturer’s manual to determine test and maintenance procedures for
instruments; i.e. used for measuring & controlling flow, level, pressure,
temperature and other variables in manufacturing and processing.
 Repair and adjusting system components or removing and replacing defective parts.
 Carry out effective care of control system including routine inspection, Testing,
logical diagram understanding ,maintenance of Hardware in control system , and
liaise with production personnel fault diagnosis with the help of System Trend and
system Alarm
 Commissioned Site new Calorific Testing Meter and Perform its Calibration.
 Conduct Testing of Hazardous Gas Detection System and Fire System.
 Conduct and testing of DCS, loops while Plant Startup after Major Shutdown.
Responsibilities Asst I&C Turbine Engineer in MuridkeCCPP (2009 –2015)
FOLLOWING ARE MY RESPONSIBILITY AT COMBINED CYCLE POWER
PLANT.
 Supervise all Instrument and Control job during day-to-day activities.
 Participate in Gas Turbine startup.
 Participate in GCV’s overhauling and its calibration.
 Worked on GE FRAME-5 Gas Turbine with MARK V control system.
 In MARK-V I did following jobs like CSP reading, tc2kerpt file checking, force
logic, check trip log.
 Good knowledge about MARK V hardware.
 Find and check diagnostics alarms.
 Control system Tool Box software working experience.
 Participating in CSP editing, and their respective file editing.
 I have calibrated following Control Valve GCV and SRV from MARK-V Control
system.
 Good knowledge about Gas Turbine Lube oil system Hydraulic oil and tri oil system.
 I fully understand about critical securities of Gas Turbine.
 Perform calibration of all Gas Turbine instruments.
 Work on single shaft Turbine 6FA made by GE with MARK VI control system.
 Participate in complete overhauling of 6FA dual fuel machine MI.
 Knowledge about DLN2.6 combustion system.
 Worked with GE Field Engineer (MARK VI) while commissioning 6FA Turbine’s
 I participated in all Gas Turbine testing and commissioning Turbines up to Base load
 Received online training from GE Learning Centre for 6FA Gas Turbine.
 Received training for Mark-VI from GE ELC representative.
 Participated in Offline and Online water wash of GT.
 I have been participated in liquid fuel commissioning of GT-6FA.
 Downloaded new .m6b file to MARK VI control system.
 Change online constant of the machine and online download minor difference.
 I can also troubleshoot the fault in Hardware or in Field with Turbine Control File .
 Knowledge about Mark Vie and it’s relevant hardware and Its Control Tool Box
ST Software as well .

5. Steam Turbine Working Experience With Skoda in Muridke (2009-2015)
 Attended Steam Turbine training from Skoda power for Steam Turbine.
 Participated in commissioning of Steam Turbine with PCS-7 control system.
 Performed calibration of Steam Turbine Governor HP and LP control valve.
 Participate in commissioning of hydraulic skid of Steam Turbine.
 Participate in calibration of HP LP Turbine bypass valve System .
 I have also been involved in checking parameter configuration of wood ward
Governor of Steam Turbine
 Conduct Final Testing of all Steam Turbine Instrument Securities.
 Conduct and verify Steam Turbine HP Control Valve and Stop valve Calibration
after Overhauled at Site.
SIEMENS PCS 7 DCS Experience in Muridke CCPP (2009-2015)
 Commissioned 234 MW CCPP with PCS 7 Control System.
 Troubleshoot fault finding in PCS-7 hardware Fault.
 I have been Commissioned HRSG with PCS-7 control system.
 Hands on experience About Wincc HMI Computer GUI for Siemens Control
System
 Well Experience on Simatic Manger of PCS-7 Engineering Control System.
 Utilized Simatic PDM software for Plat Instrumentation.
 Expertise to find out the cause of the plant tripping using Wincc alarm and trend in
DCS.
 Worked on Steam Turbine having control system PCS-7-400H.
 Worked on S7-300 CPU with Demi water Plant.
 Read CFC charts in PCS-7 during online and Offline in Simatic Manger.
 Knowledge to handle plant with two redundant servers and one Archive and 4-
client operator station with Siemens PCS-7 Control System
Responsibility as HRSG & BOP Asst I&C Engineer in Muridke(2009-2015)
 Worked on HRSG’s install at exhaust of Gas Turbine.
 Participate in HRSG duct burner startup and overhauling.
 I have performed calibration of instrumentation like control valve Hydraulic Valve
and flame scanner and troubleshoot its startup logic in PLC system.
 I have completed HRSG training from GE Online Protal.
 Completed GE Technical Training on Web based Applivation HRSG & their
Startup.
 Commissioning boiler BMS system (Bentone ) and also troubleshooting in startup
Like. Block valve, Pilot Valve, Flame scanner and boiler level switch
 Worked on boiler three element control loop and fuel control loop
Moreover, understanding the lead/lag system used in fuel control system.
 I have experienced to work with boiler BMS PLC system.

6. Responsibilities in ENGRO Chemical as I&C Professional :(2005---2009)
FOLLOWING ARE MY RESPONSIBILITY AT UREA/AMONIA/UTILITY PLANT:
 Performed following jobs like Installation, calibration, maintenance, modification,
overhauls, re-commission and tests all installed instrumentation and control
systems, including Pneumatic and electronic.
 Performed maintenance and faultfinding, repair and calibration of Gas Turbine
controls Mark VI and protection systems in accordance with prescribed routine and
preventive maintenance procedures.
 I have been Worked with GE Gas Turbine Frame 5 during Worked in Engro
With GE Turbine Control System Mark VI .
 Carry out effective care of control system including routine inspection, Testing,
logical diagram understanding, maintenance of Hardware in control system, and
liaise with production personnel fault diagnosis with the help of System Trend and
system Alarm.
 Perform maintenance of following Control Systems Bailey, Honeywell, and ESD.
 Work on Following System as Vibration, Temperature monitoring & Protection
systems, Anti- surge control systems, HMI, PLC , SLC DCS(Siemens)Bailey INFI
90 Honeywell TDC-3000 ,MARK VI, MARK Steam Turbine control system and
Gas Turbine control system.
 Carryout effective maintenance of field instruments including routine inspection,
Testing, calibration, repair, maintenance, commissioning and liaise with
production personnel fault diagnosis and maintenance of instrument related to
Plant.
e.g. Chemical(fertilizer), Power, Food, Polyester.
 During working with these plant I work with following company instrumentation
E.g. Yokogawa, Honeywell ,Siemens ,Rosemount,Moog,Rexroth.
 Performed following job on DCS
 Understand DCS LOOP drawing.
 Check system diagnostic alarm online.
 Performed on line troubleshooting of online control loops.
 Performed Online Control Loop Tuning PID Controller.
 Troubleshoot all Control Loops of flow level and Pressure.
 I have Familiarization of Bailey Control system Infi 90.
 Worked on Ammonia Plant Safety System Named as ESD by ABB August.
 Performed troubleshooting and fault finding in ESD system
 Performed adjustment and Calibrate all ESD instrument on running plant by proper
Bypass/Defeat security procedure.
 During Work in Engro also Work in Spare parts inventory management system to
check all Instrument Spare as per Order/Spec.
 During the Job, My highest priority to perform work with Safety and Quality.

7.  I completed my all job assignment with safety and Compliance with Company
Procedure.
 During Working on Gas Plant well known about all Gases Hazard.
 Work on Instrumentation in Hazardous Gas Presence Atmosphere.
 Know about Hazardous Area Classification .
 Well known about EEx Instrument Installation in Hazardous Area.
Re
Apprenticeship in ENGRO Chemical as Instrument Professional :(2003---2005)
sponsibilities in ENGRO Chemical Pak Ltd:(2005---2009)
Following are my Duties and Responsibilities as Apprenticship I&C for 2 year.
6 month Class room training as per Exxon Standard and Familriziation about Plant
Knowledge and it is Working.
I have also attended many technical Classes during stay with Engro Chemical.
Next 6 Month I have assigned Ammonia Plant as Asst I&C Technical Processional.
During working on Ammonia Plant ,I learnt a lot about Ammonia process and PID
reading and Electrical Diagram using and Check Cause and effect Diagram before
Working on DCS and ESD .During Stay in Ammonia Plant I learnt about the
Centrifugal Machine’s and Participate Anti Surge Project over their on Gas
Compressor by CCC Company .
Next 6 Month I have assigned for Urea Plant Where I learnt a lot about Urea
Process and to review Plant PID and their Cause and Effect Diagram.
I have worked over their on Reciprocating Compressor and their Working Process and
their Interlock as I&C Point of view.
Next 6 month I have assigned at Utility Plant Where I learnt about Utility Process and
then Work on GE Gas Turbine Frame 5 with Control system Mark V.
I learnt how to check all loop connected Instrument in Gas Turbine Control System.
I learnt over their Gas Turbine Control System Mark V and their Working Topology
and Protocol and How to change its hardware and how to access its hardware
problem.
General About Computer Software Skills and IT Troubleshooting
Engineering Software:
Parts Identification System in GE Like PLM and Metaphase.
GE Toolbox 11.5 for Mark VI and Cimplicity V 6 .0.
Siemens S7 Simatic Manager 7.0 & WinCC 6.2,
IBM Maximo 6.0 User Level
Installation of different Control System in Plant Computer.

8. Well Information about Microsoft Operating System.
Honeywell Gas Detection System.
Esser 8000 Fire and Gas Detection Control System with Tool 8000
Office Software:
MS Word, Excel, PowerPoint, Front page, etc. Use of Microsoft e-mail for Communication Purpose.
Net Working Skills:
I have very good experience in most of the network router and Cisco Modem and Switches Experience
During Work in Corporate Organization Where WLAN and LAN become very Great Importance
ENVIROMENT , HEALTH ,SAFETY EHS
I have good knowledge about work permit system.
I have experience about safety Lock out Tag out Practical Experience as Competent Person.
Knowledge about DuPont safety standard about chemical plant.
Following thing, which I learnt in Petrochemcial Industry while Worked on DuPont
standard
 PSI (Process safety information)
 PHA (Process Hazard Analysis)
 Operating and maintenance procedure.
 Safe work practices.
 Management of technology change (MOC).
 Quality assurance.
 Pre startup Safety review.
 Mechanical integrity.
 Personnel training and performance.
 Incident investigation and communication.
Member of emergency planning and response Team (ERP)
I have additional responsibility in organization as First Aider and Fire Fighter.
I received 30 EHS online Training from GE EHS Portal.

9. I have got training about work at Height.

10. I have got training about work at Height.