With 775 fatalities and 90,000 injuries on construction jobsites across the country every year, the industry has a way to go until we achieve Zero Accidents.
It's work, not war: How to prevent deadly harm in construction
1. It’s work, not war:
how to prevent deadly
harm in construction
With 775 fatalities and 90,000 injuries on construction jobsites
across the country every year, the industry has a way to go
until we achieve Zero Accidents.
These 4 causes account for more than half (56%) of all construction worker deaths
in 2012, and eliminating them would save 435 workers' lives in America every year.
Fatal work injuries in the
private construction sector
increased 5% to 775 in
2012, from 738 in 2011
Total hours worked in
the private construction
industry increased one
percent in 2012
The increase in fatal occupational
injuries in 2012 follows five
consecutive years of declining
fatal injury counts in the
construction sector
Fatal construction
injuries are down 37%
since 2006
Know the 4 most common causes
of construction site fatalities
Falls Struck by Electrocutions Caught-in/
between
36% 10% 9% 2%
Even small, unsafe acts can pave
the way for major accidents.
2012
1%
The 10 most commonly cited OSHA violations are:
Walk through these checklists daily
1
2
8
3
7
5
9
4
6
Take care of yourself off the job
1 2
!
3 4 5Lack of or
improper fall
protection systems
Poor hazard
communication
Improper
scaffolding
Lack of respiratory
protection
Electrical wiring
hazards
6 7 8 9 10Powered industrial
truck accidents
Problems with
ladders
Lockout/tagout– Faulty electrical
systems design
Improper or no
protection from
machinery
Failure to
properly shut
off equipment
Unsafe situations escalate
Know what you and every person
can do to build safety together
Eat well
Hunger is distracting
Exercise
Staying fit can prevent back,
knee and other injuries
Driving
Close to 30,000 Americans die in
car accidents each year. Safety
begins with you – driving safely
to and from the jobsite.
Sleep
Starting the day being
well rested leads to fewer
mistakes and surer footing
!
Identify all specifichazards found
Environmental
exposures/hazards
Craft Hazards
Hazards from
other trades
For every step, plan forhow will you controlthe hazards
!
Do pre-tasking planning by...
Debrief from previousday’s activities
List ALL the stepsof the job
Have the safety equipment
you need before starting
Head
Protection
Eye and
Face
Protection
Foot
Protection
High
Visibility
Attire
Respiratory
Protection
Work Attire
3"
Shirts will have
a minimum
sleeve length
of 3 inches
Tank tops and
cut-off shirts are
not permitted
Long trousers that fit properly
around the waist and ankles
are required.The length of the
trouser will be such as to
not present a tripping hazard.
Shorts are not permitted.
Limber up before you start
Taking time to stretch and flex
your muscles before hard work
makes you mentally and
physically prepared
SafetyWeek2014.com
InjuryFreeEnvironment.com
USA.Skanska.com
10
Know the top 10 danger zones
But Zero Accidents must be our goal.
We can build safer jobsites, but it’s up to every individual to take the
steps necessary to prevent accidents.
Sources
www.bls.gov/news.release/cfoi.nr0.htm
www.bls.gov/iif/oshcfoi1.htm#2011
www.osha.gov/dcsp/compliance_assistance/frequent_standards.html
Fatality
Lost Time
Accidents
OSHA
Recordable
First Aid
Unsafe Acts
(Near Miss)