The glass panels are selected to give you a carefree and safe bathing experience and they are thick enough to sustain the temperature of the water.

1. Although there are many myths about wet rooms, home owners have kept aside those myths and gone
ahead with the construction of wet rooms. What are these wet rooms? How are they constructed?
What are the key aspects of wet rooms? How much time does it take to construct a wetroom? These are
some of the questions that are generally asked by people who are completely new to the concept of wet
rooms.
There are some key aspects of wetrooms that are generally overlooked by
home makers. Ignorance of these wetroom aspects can cost a lot of
money in terms of repairs and maintenance. For the layman, a wetroom is
just a simple room that has a drain in the center of the floor and tiled
waterproof walls. In fact, there are many things that go into the making of
the wetrooms and you may not be aware of that at all.
Waterproofing the wetroom is a major task for the wetroom specialist. The wetroom specialist would
generally use RIW tilesafe to make the wetrooms water proof. Tilesafe is a heavy duty self-adhesive
membrane that consists of a very thick rubber modified bitumen waterproof layer that incorporates
woven glass fibre mesh on one of the face. The major benefits of tilesafe are: It is quick and easy to
apply, accommodates movement in substrate, factory controlled thickness, etc. The tilesafe is best
suited for apartment buildings, hotels, and modern homes as well.
The RIW tilesafe is a membrane system that has been developed to give waterproofing below the
ceramic tiles in the wetroom. If you are going to use tilesafe under normal conditions, then you will get
an effective barrier to the transmission of water and water vapour. Along with tilesafe, you may also
need tilesafe primer, tilesafe reinforcing tape, tilesafe jointing compound, and tilesafe putty. The
thickness of tilesafe is 2 mm, and roll weight is 22 kg.
Before the application of tilesafe, it is very important that the mason takes care of the surface. The
surface on which the tilesafe membrane will be applied needs to be clean and dry. Moreover, the
surface needs to be free from dust, grease, oil and other such substances. If the surface on which you
are going to apply the tilesafe membrane is not flat, you will have to fill the gaps with a suitable filler.
You don’t need to be worried about the smoothening because the mason will take good care of that.
If the surface on which the tilesafe membrane needs to be applied is contaminated, then special care
needs to be taken. First, you will have to clean the surface to make sure that all contaminants are
removed. If there is a fungal attack on the surface, you will have to use an appropriate fungicide to
destroy the biological growth. High pressure water jetting can also be used to remove contaminates
from the surface. Water jetting is relatively cheaper than the other treatments. With the best wet room
systems, you will surely be able to give a good look for the wet rooms.
We offer an innovative range of products and drainage Wet room solutions tailored to create stylish wet
room systems at an affordable price.