Magnetic Survey

MAGNETIC SURVEY
Date : May 21, 2020
Time : 12 : 30 P.M.
APPLIED GEOPHYSICS
ENGINEERING GEOLOGY
Presenter :
Sudhan Kumar Subedi
Meeting ID : 725 0504 4902
Meeting Password : 5qxJwu
Interested can Join Zoom Meeting
https://us04web.zoom.us/j/6755682948?pwd=YW5xVkZ4MzQxcWVuRjA0SmN4Z3d1QT09

Magnetic Survey Method
May 21, 2020
Magnetic Susceptibility
Magnetic susceptibility is the ratio of intensity of magnetization (I) and magnetic intensity of substance (H).
χ =
I
H
For Ferromagnetic material, χ >> +1
For Paramagnetic material, χ > +1
For Diamagnetic material, χ < 0, i.e. –ve
χ
T
Tc (curie
Temperature)
Ferromagnetic Paramagnetic
Diamagnetic

May 21, 2020
Magnetic Susceptibility of rocks
Magnetic Susceptibility of rocks is in principle, controlled by the type and amount of the magnetic minerals
contained in rock.
Dominantly Controlled by
Paramagnetic minerals i.e.
mafic silicates such as
- Olivine
- Pyroxenes
- Amphiboles
- Micas
- Tourmaline
- Garnets
Often controlled by
ferromagnetic minerals
(iron oxides or sulphides :
- Magnetite
- Pyrrhotite
Much less frequently
controlled by diamagnetic
minerals :
- Calcite
- Quartz

May 21, 2020
Magnetic Susceptibility of rocks and their ranges
Source : Reynolds, J. M. (2011)

May 21, 2020
Source : Telford, W. M., Geldart, L. P., & Sheriff, R. E. (2010)

May 21, 2020
 Metamorphic rocks are dependent upon their parent material and thus, metapsammites are likely to have
different susceptibilities as compared with metapelites.

May 21, 2020
 In addition to mineral composition, Susceptibility depends on the alignment and shape of the magnetic
grains dispersed throughout the rock.
 Magnetic fabric analysis provides a very sensitive indication as to the physical composition of rock or
sediment, which in turn can be important in interpreting the physical processes affecting the rock.
 If there is a marked orientation of particles, such as in sedimentary or metamorphic rocks, a strong
physical anisotropy may exist. The variation of magnetic property as a function of orientation and shape of
the mineral grain is known as ‘Magnetic Fabric’.
For example, it is possible to
correlate the magnetic fabric
variation in estuarine sediments
with sonograph image of estuary
floor.

May 21, 2020

May 21, 2020
• For Magnetic ore bodies with extremely high susceptibilities (k >> 10 6 SI) , the measured susceptibility
(i.e. apparent susceptibility can be reduced substantially by a shape demagnetization effect.
• This involves a demagnetization factor Nɑ ,
which depends on direction ɑ .
Ka = K / ( 1 + Nɑ K)
For Sphere,
Nɑ = 1/3 in all directions
For thin-sheet like body ,
Nɑ ≈ 1 in transverse directions
Nɑ ≈ 0 in longitudinal directions

May 21, 2020
Elements of Earth Magnetic Field

May 21, 2020
How did the Earth become differentiated to have different layers ???
• Earth is such a distance away from the sun that water can exist in all the three forms of solid , liquid
and gas.
• Density of water is 1 g/cc.
• Density of the most of the rocks available at the Earth’s surface is ≤ 3 g/cc.
• Overall density of the Earth is about 5.5 g/cc.
• clearly indicates that Earth’s interior consists of layers of increasing densities.
• Dense layers at the depth and higher ones at the surface and most dense at the center of the earth.
• Gravity is the driving force for such a wide sedimentation of different layers over the area.

May 21, 2020
Crust
Can be divided into two – The Continental crust and the Oceanic Crust
The Continental Crust
• Much thicker (up to 75 km) and is composed of less dense granitic rocks (2.7 g/cc) and is strongly
deformed.
• Composed of planet’s oldest rocks (billions of years in age)
The Oceanic Crust
• Relatively thinner (about 8 km thick) and is composed of basaltic rocks of volcanic origin heavier
than continental (3 gm/cc).
• Comparatively undeformed and geologically younger (200 millions of year of age)

May 21, 2020
Mantle
 Also include iron and magnesium in abundance
 2900 km thick and constitute 82 % of Earth’s volume and 68 % of Earth’s mass.
 Composed of rocks (made from compounds of silicates and oxygen)
 Covers the core
 Fragments of mantle are brought during volcanic eruption.
 Because of pressure of overlying rocks, its density increase with depth (3.2 g/cc in the upper
part to 5.0 g/cc near the core )
State of Mantle
• It is in semi-molten state and exhibit the convection current to the plate tectonics to occur.
• Decay of radioactive material in the lower mantle used to generate lots of heat during Archean age (3800-
2500 Mya. Presently, the rate of decay is less to drive the Plates through convection. Thus, Presently Mantle
is considered as in solid state and not of causing convection current ( Tackley, 2000; Koranaga, 2006)

May 21, 2020
Core
 Constitute 16 % of Earth’s volume
 Density increases with depth
 Average density of 10.8 g/cc
 Extending in a diameter of 7000 km
 32 % of Earth’s mass
 Mainly consist of Iron and Nickel

May 21, 2020
Core
 Outer Core is extending between 2900 km to 5100 km. Alloy of iron and nickel having temperature range
from 4000°C to 5000°C in liquid form and causing the convection current.
- It causes the Earth’s magnetic field due to its high density and constant motion and metallic properties.
- Causes shift in the magnetic poles
- Leaves record of the rocks in terms of Paleomagnetic value. Useful to understand the movement of
continents over the past
Divided into Outer Core and Inner Core :
 Inner Core is extending between 5100 km to 6400 km. Mostly composed of iron having temperature of
5000°C to 7000°C as high as the surface of the sun.
- Even though the temperature is so high, the overburden pressure is so high that the Iron cannot melt
and thus inner core is in solid state unlike outer core.

May 21, 2020
 Considering the presence of iron, at a high temperature in solid core and as a result of convection
current generated due to the temperature variation in outer core, drives the inner core.
 As a result of this, the inner core rotates resulting in generation of electric current.
 Further, magnetic field comes into picture
 For magnetic force to exist, there should be dipole, very much similar to magnet.
 Presence of inclination of axis joining the poles is about 11° with respect to true north.

May 21, 2020
 The present configuration of magnetic poles, keep changing.
 Period in which such change occurs is defined as Chrons.
 While Normal Polarity indicates pole configuration matching with present North Pole and South Pole.
 Reverse polarity indicates a situation in which present North pole becomes South pole and present
South pole becomes North pole.
 So far, 183 reversals in magnetic poles has happened in last 83 million years ( Leonardo et. al.,
2014)
Change in Polarity (Geomagnetic Reversal)
 As per Byrd (2018), reversal lasts for almost 200 years.
 A complete reversal known as Laschamp event, occurred about 41000 years ago.

May 21, 2020

May 21, 2020
 In early part of 20th century, geologists reported to have volcanic deposit showing reverse orientation
on magnetic depositions.
 While some rocks indicated magnetic depositions matching with present pole configuration, other
showing complete reverse field.
 Based on dating method, it was found that rock which were showing reverse magnetic field belonged
to the Pleistocene age (2.5 million years – 0.12 million years).

May 21, 2020
 At plate boundaries, mainly divergent boundary, new material from mantle comes to the surface and
gets deposit.
Important Observations
 This way new surface is formed.
 Molten material which is coming to the surface, having magnetic minerals. These minerals will orient
themselves as per the magnetic pole configuration during the time of deposition and cooling.
 This way, magnetic rocks preserve the characteristics of pole configuration to the point.

May 21, 2020
 At divergent boundary, deposition of material is a continuous process, which means that just at the
boundary the deposition characteristics will be matching with present configuration.
Important Observations
 However, away from the boundary, depending upon the rate of deposition and configuration of poles
when material was deposited, its mineral orientation will be different and may be closer or far
distance from the boundary.
 Based on age of deposition and mineral orientation, the configuration of magnetic polarities in the
geological time scale can be assessed.

May 21, 2020
 Depending upon the characteristics of divergent plate boundary, the mineral deposited in a region
should be indicative of average magnetic properties to be constant throughout.
Magnetic Anomaly
 In case of small magnetic when comes in contact with Earth’s magnetic field, exerts addition force.
 Similar way, presence of material such as ore deposits, unconformity, buried objects, voids etc. which
can cause change in magnetic characteristics in comparison to average characteristics.
 Such a change, if detected, based on field measurement, is known as MAGNETIC ANOMALY.

May 21, 2020
Survey Can be done :
 On Ground
 In Air
 Based on Satellite Data
 Offshore Vessels

May 21, 2020
Instruments : Magnetometer
Magnetometers are used for measurement of strength of field.
Commonly used magnetometers are :
- Proton Precession Magnetometer
- Alkali-vapor/Optical Pumping Magnetometer
- Flux-gate Magnetometer

May 21, 2020
Proton Precession Magnetometer
• Proton Precession Magnetometer operates on the principle that protons in all atoms are spinning on an axis
aligned with the magnetic field, according to Larmor equation.
• Ordinarily, proton tends to line up with the earth’s magnetic
field.
• When subjected to an artificially-induced magnetic field,
the protons will align themselves with the new field. When
this new field ceases, the protons return to their original
alignment with the earth's magnetic field.

May 21, 2020
 In a proton precession magnetometer, a container of fluid
rich in hydrogen atoms, usually a hydrocarbon, is
surrounded by a coil of wire which can be energized by a
direct current to produce a strong magnetic field, forcing all
protons to align in a certain direction.
 The current is then shut off, letting the protons to precess
back to their original direction.
 The precession induces a very weak signal into the same coil, which is measured by a frequency
counter to give a direct readout of the magnetic field strength.
 As they change their alignment, the spinning protons precess, or wobble, like a gyroscope. The
frequency at which the protons precess is directly proportional to the strength of the earth's magnetic
field.

May 21, 2020

May 21, 2020
Alkali-vapor/Optically Pumped Magnetometer
• Alkali vapor optically pumped magnetometers use alkali metals including Cesium, Potassium or
Rubidium. The cell containing the metal must be continuously heated to approximately 45 to 55 degrees
Celsius to render the metal in gaseous form.

May 21, 2020
• A glass vapour cell containing gaseous metal is exposed (or pumped) by light of very specific wavelength
– an effect called light polarization.
• Electrons at level 3 are not stable, and they spontaneously decay to both energy levels 1 and 2.
Eventually, the level 1 is fully populated (i.e. level 2 is depleted).
• When this happens, the absorption of
polarizing light stops and the vapour
cell becomes more transparent.
• The frequency of light is specifically selected and circularly polarized for each element (i.e. the D1
spectral line) to shift electrons from the ground level 2 to the excited metastable state 3

May 21, 2020
• This is when RF depolarization comes into play. RF power corresponding to the energy difference between
levels 1 and 2 is applied to the cell to move electrons from level 1 back to level 2 (and the cell becomes
opaque again).
• Depolarization by a circular magnetic field at the Larmor frequency will rebalance populations of the two
ground levels and the vapour cell will start absorbing more of the polarizing light.
• The effect of polarization and depolarization is that light intensity becomes modulated by the RF
frequency. By detecting light modulation and measuring the frequency, we can obtain a value of the
magnetic field.
• The frequency of the RF field required to repopulate level 2 varies with the ambient magnetic field and is
called Larmor frequency.

May 21, 2020
Flux-gate Magnetometer
• The fluxgate magnetometer is a magnetic field sensor for vector magnetic field. Its normal range is
suitable for measuring earth’s field and it is capable of resolving well below one 10,000th of that.
• Fluxgate magnetometer designs fall into broadly two styles, those employing rod cores and those using
ring cores-
• The name fluxgate clearly derives from the action of the core gating flux in and out of the sense coil
• All fluxgates use a highly permeable
core which serves to concentrate the
magnetic field to be measured.

May 21, 2020
Applications
• Can be used to locate:
- Drums, pipes,
- metallic objects,
- buried military objects such as shells,
- underground coal burns,
- mine shafts
• For Mapping :
- Archaeological remains such as cemeteries,
- Landfills
- Dikes, faults
- underground coal burns,
- Steep Geological features

May 21, 2020
Advantages
- Quick method of Exploration
- Field observations are less expensive and easy
- Even possible from small vessel in offshore environment
- Presence of scarp metal and electric cable might alter field observations and thus are
not suitable in urban areas,
- Material with magnetic characteristics can be detected in form of anomaly
- Resolution decreases with depth
Limitations

May 21, 2020
Thank you !

Magnetic Survey

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (20)

Similaire à Magnetic Survey

Similaire à Magnetic Survey (20)

Plus de SudhanKumarSubedi

Plus de SudhanKumarSubedi (8)

Dernier

Dernier (20)

Magnetic Survey