2. Kwikstage
Products
K-Stage Standard
Standards are vertical structural member of the
scaffold system which are made from 48.3 OD X
4mm Tubes
Standards have “V” pressings in clusters at 495
mm centres, which provide location points for
Transoms, Ledgers, Braces, Hopups etc and a spigot
fixed at the
top.
K-Stage Ledgers
Ledgers is horizontal member of the scaffold system
also known as guard rails are made from 48.3 OD
X 3.2 mm & 4 mm tubes. Ledgers fit into the upper
“V” Pressings on the standards.
K-Stage Transom
Transoms are made by welding two 5.00 mm angles
back to back. Transoms fit into the lower “V”
pressings on the standards to carry steel boards.2.4
m
Truss Transom
Used for heavy duty load spans and extended distances.
Spigot
Used to join 2 standards together. Requires either a hinged pin or
special bolt.
Mass
17.5kg
14.5kg
11.5kg
8.5kg
6.0kg
2.0kg
Mass
9.2kg
7.0kg
5.0kg
4.3kg
Mass
22.0kg
13.5kg
9.6kg
8.0kg
6.0kg
Length
3.0m
2.5m
2.0m
1.5m
1.0m
0.5m
Length
2.4m
1.8m
1.2m
0.7m
Length
1.8m
1.2m
1.0m
0.7m
K
K
Tr
b
2
KWIKUP PRODUCT
BROCHURE 2014
3. K-Stage Steel Plank
The steel plank spans between the transoms giving a
non slip surface with a is hot dip galvanized finish.
LVL Scaffold Plank
Individually proof tested and compliant in accordance
with AS 1577 for Stiffness, Strength, Sliding & Slip
Available in various lengths & can be cross cut to exact
lengths
Stamped as Scaffold plank with AS compliance mark
High strength
Chamfered edges
Suitable for PETROCHEMICAL & GAS industries
Meets industry standards
Enhanced durability & safety (AS)
Competitively priced
K-Stage Hop Ups
Board Stage Brackets / hopups fit into the “V” pressing
of the standard which is nearest to the wall. The 2 &
3 BSB have holes into which tie bar pins are attached.
They are used to provide cantilevered platform on the
inside of the scaffold nearest the wall.
Diagonal Braces
The diagonal brace is used to the full height of the scaf-
folding in a longitudinal direction.
Mass
15.0kg
10.5kg
6.5kg
4.0kg
Length
2.4m
1.8m
1.2m
0.7m
Mass
17.5kg
14.5kg
11.5kg
8.5kg
6.0kg
2.0kg
Mass
2.5kg
6.0kg
9.0kg
Mass
13.5kg
12.5kg
11.0kg
9.5kg
8.5kg
7.5kg
Length
3.0m
2.5m
2.0m
1.5m
1.0m
0.5m
Bracket
Type
1Board
2Board
3Board
Length
3.6m
3.2m
2.7m
2.4m
2.0m
1.7m
3
4. K-Stage Tie Bars
Tie bars have pins at each ends which fit in holes of
2 and 3 board stage brackets (hopups) to prevent the
brackets from spreading and the planks from becoming
dislodged.
End Toe Board Brackets
Fits into ‘V’ locating lugs on the standard at the end of a platform
to hold the end
batten toe board vertically in place.
Toe Board Bracket
Clamps to the standard with a captive wedge to hold the batten toe
board
vertically in place.
Double C Clip / Gantry Coupler
Used to Join Standards Back to Back
Ladder Access Transom
An adjustable transom with landing for ladder/stairs
Mass
7.0kg
5.0kg
3.0kg
2.1kg
Length
2.4m
1.8m
1.2m
0.7m
Mass
1.5kg
Mass
0.8kg
b
b
4
KWIKUP PRODUCT
BROCHURE 2014
5. Guardrail Post
Used for edge protection – slab or balcony’s. Bolted into concrete with 14mm
Dyna Bolts. Compatible with all sizes of ledgers which makes it very versatile.
Step Down Bracket
The first step onto a stair access or ladder access is always difficult due to site
constraints, ground levels and base outs. The use of the adjustable step down
bracket gives the comfort of adjustment to balance the variables so the step
becomes balanced when getting on or getting off a stair access at ground
level
Wall Tie Bracket
SizeSuitable for 48mm tube, used to secure the scaffold to a structure
Base Plate
Add more stability to your scaffold structures with a base plate. When secured
the base plate stops tube from slipping across the floor.
Internal Corner Panel
Used with Hop Up Brackets to fill any corner gaps in the scaffold structure.
Mass
2.20Kg
Size
225x225mm
B
I
U
5
6. Scaffold Tubes
Tubes have a 48.3mm outside diameter and
the wall thickness of 4.05 the tubes are to be
used with all types of couplers and fittings
Putlog Single Coupler
Used for joining putlogs or transoms to
ledger tubes, providing a level unconstructed surface for planks
and boards. Also used for securing ledgers to standards.
Half Coupler
Forged Steel piece, fit for 48.3MM tube, which is flat and un-
plated, suitable for welding
Double Coupler
A strong drop forged connector, providing strength under load
bearing situations joining tubes at 90 degree angles.
Blade Putlog
plug adapter/pressed clamp, Converts 48.3mm scaffold tube into
putlog for insertion into brickwork joints.
Couplers Tubes
and Fittings
Length
0.6m, 0.9m, 1.2m,
1.5m, 1.8m, 2.1m,
2.4m, 2.7m, 3.0m,
3.3m, 3.6m, 3.9m,
4.2m, 4.5m, 4.8m,
5.1m, 5.4m, 5.7m,
6.0m, 6.3m, 6.5m
Mass:
1.0 kg
Mass: 1.25 kg
6
KWIKUP PRODUCT
BROCHURE 2014
7. Double Putlog Coupler
Makes connection of putlogs and transoms to standard scaffold tube while
allowing scaffold boards to be laid on top of the tube.
Beam Clamp
Solid one piece drop forged steel fitting providing quick and secure fixing toS
beamsb
Always to be used in pairsA
Swivel Beam Clamp
Drop forged with swivel capability used in pairs for variable angle clampingD
of 48.3mm O.D. scaffold tubes to steel beam flanges up to 45mm thicko
Hook Putlog
The Hook and base plate is made up of mild steel. Alternative to RAC
Mass: 1.5 kg
Mass: 1.6 kg
7
8. Internal Joiner
Internal expanding type fitting to connection scaffold tube vertically end to
end
Swivel Coupler
Connections to standard scaffold tube at any angle required.
External Joiner / Sleeve Coupler
External compression type fitting to connection scaffold tube end to end
Hoarding Clip
Forged Steel piece, scaffold stop-ends and scaffold guard board returns are
neatly and efficiently locked into the correct positions to secure scaffolding
Hook Coupler
Used to attach ladders to scaffold
Mass: 1.3 kg
Mass: 1.3 kg
8
KWIKUP PRODUCT
BROCHURE 2014
9. Adjustable
Formwork Prop
The adjustable prop Provide
emporary support and is easy to
et up.
Prop Nut
Used to lock prop height
U Head Jacks
A high capacity so
stem with a fixed
head
Shoring Jacks
A high capacity solid jack
stem with a fixed 8 inch U
head
Mass
3.86 kg
7.75 kg
1.50 kg
4.42 kg
0.24 kg
Length
Prop No.0) 1.2 M-1.8 M
Prop No.1) 1.7 M–2.5 M
Prop No.2) 2.0 M–3.0 M
Prop No.3) 2.6 M–3.8 M
Prop No.4) 3.2 M–5.0 M
A
F
Th
te
se
M
1
1
2
2
3
Le
(P
(P
(P
(P
(P
Props and
Formwork
cks
olid jack
8 inchh U
cks
9
10. Aluminium
Hand Rail
Aluminium Hand Rails
provide stability and
support when climbing
stairs units
Aluminium
Top Hand Rail
Provide stability and
support when climbing
stairs units
Mesh Steel
Pallet
is a steel transport
structure with a cage
that holds goods in a stable fashion while
being lifted by a forklift
Ladder
Beams
de a clear heavy
n between extended
6.3 m
Swivel Jack
Provides stability for uneven surface.
180 degree rotation for extra flexibility.
Constructed of heavy duty steel.
Galvanised for long lasting protection.
Solid Base Jack
Adjustable base jack enables accurate
leveling of the scaffolding on uneven
ground and infinite adjustment on
sloping ground
Size: 36ODx710mm
Mass: 7.5 kg
Aluminium Stairs Unit
Aluminium Stair Units are the
perfect product to incorporate
within your Kwikstage scaffold
system. These 1.5m high stair
rises are lightweight with non-
slip treads and platform. Hand-
rails and Exit Rails are also avail-
able and comply with Australian
Standards
Steel Pallet
is a steel transport structure
that supports goods in a sta-
ble fashion while being lifted
by a forklift
Accesories
List
L
B
To provid
duty span
distances6
M
P
i
s
10
KWIKUP PRODUCT
BROCHURE 2014
11. Branch &
Distribution
Network
Branch & Distribution Network
When you need scaffolding anywhere, anytime, think KwikUP.
Find Us Online or Just Call
Find us on the web at www.kwikup.com.au or call us at (02) 9729
2122 to talk to someone now. Our staff is Friendly and eager to
help find what you are looking for.
Warehouse Information
KwikUP Head Office: 02 9729 2122
FAX: 02 97292473
Sydney Warehouse
28 – 54 Percival road
Smithfield NSW – 2164
Perth Warehouse
Unit C, 33 McDowell St.
Welshpool WA 6106
Postal Address
Post – P.O.Box 2166
Smithfield NSW 2164
11
12. Contact Details
KwikUP Head Office: 02 9729 2122
FAX: 02 97292473
Sydney Warehouse
28 – 54 Percival road
Smithfield NSW – 2164
Perth Warehouse
Unit C, 33 McDowell St.
Welshpool WA 6106
Postal Address
Post – P.O.Box 2166
Smithfield NSW 2164
www.kwikup.com.au
info@kwikup.com.au