The document describes how to set up a DNS server in Packet Tracer to translate domain names to IP addresses. It involves building a network topology with a server and two PCs, configuring static IP addresses for each with the server acting as the DNS server, and testing domain name resolution by pinging hosts by name. When successful, the DNS service is resolving names to IP addresses correctly.

1. DNS server in Packet Tracer
Made by : Tanjilur Rahman
City University, Bangladesh
: DNS Means Domain Name System of a website. It
About DNS Server
translate the domain name into ip address.
1. Building A Network Topology:
2: Configure The Pcs And Server with static ip address.
1. Server’s ip Configuration:

2. Here, IP address: 70.70.0.0 Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1
DNS Server: 192.168.1.2
2: PC 1

3. IP address: 192.168.1.3 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0 DNS Server:
192.168.1.2
3. Pc2

4. IP address: 192.168.1.4 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0 DNS Server:
192.168.1.1
At the last step,
Test domain name – IP resolution. Ping the hosts from one another using their names
instead of their IP addresses. If the DNS service is turned on and all IP configurations are okay,
then ping should work. For example, ping PC1 from PC0. Ping should be successful.

5. Success.! Success..!! Success…!!!