Insulated Copper Braided Shunts Ω LINK http://www.teknomega.com/electrical-equipment-for-panel-boards/insulated-flexible-electrical-connections Ω LINK is a ready to-use flexible Prefabricated shunt made in Tinned Copper Braid, coated with PVC Insulation. MAIN ADVANTAGES INSULATED COPPER BRAIDED SHUNTS Ω LINK file n° E300607 (approval pending) Ω LINK is the QUICKEST and MOST CONVENIENT solution to make electric connections from 125 to 630 A. The connection Terminals are made of pressed tinned copper tube. Their size is Designed looking at the poles of the most widespread switchgears on the market, thus making it possible to get the best electric contact possible. Hole Diameter allows, on one side, optimization of the electric contact in relation with the switch pole; on the other end, the possibility to have a universal contact to Bar Distribution Systems. Made in PVC, the Insulation of Ω LINK Insulated Flexible Electrical Connections, meets all the electric specifications required for use in Low Voltage applications. Maximum continuous working temperature is 105°C. The best alternative to cable connections and to Flexible Bar ADVANTAGES Ready to-use connections: no preventive operation is required • Extreme Flexibility compared to a Cable with similar Cross-Section • Volume Reduction inside the Panel Board • Weight Reduction • Great Time Saving • No cable to cut to measure • No stripping of the heads of the cable or the flexible bar • No lug to buy • No crimping or drilling needed EXCELLENT ELECTRIC PARAMETERS • Excellent electric insulation • Better contact surface • Better ampacity at equal cross-section compared to a cable and/or reduced cross-section at the same rated current • Reduced heating due to the lack of crimped connections and to better ampacity • Excellent short-circuit resistance RANGE • Cross-sections : from 25 mm2 to 240 mm2 • Lengths : from 230 mm to 930 mm • Rated ampacity : from 125 A to 630 A

1. Ω LINK
Ω LINK - Insulated copper braided shunts
Ω LINK is a ready-to-use flexible prefabricated shunt made in tinned copper braid, coated with PVC insulation.
Ω LINK is the quickest and most convenient solution to make electric connections from 125 to 630 A.
The connection terminals are made of pressed tinned copper tube. Their size is designed looking at the poles of the most widespread switchgears
on the market, thus making it possible to get the best electric contact possible. Hole diameter allows, on one side, optimization of the electric
contact in relation with the switch pole; on the other end, the possibility to have a universal contact to bar distribution systems.
Made in PVC, the insulation meets all the electric specifications required for use in L.V. applications.
Maximum continuous working temperature is 105°C.
The best alternative to cable connections and to flexible bar connections
ADVANTAGES
Ready-to-use connections: no preventive operation is required
- Extreme flexibility compared to a cable with similar cross-section
- Volume reduction inside the panel board
- Weight reduction
- Great time savings
- No cable to cut to measure
- No stripping of the heads of the cable or the flexible bar
- No lug to buy
- No crimping or drilling needed
approval pending
file n° E300607
SOLUTIONS FOR THE ANCHORING OF Ω LINK
Ω FLAT
DZP3000
EXCELLENT ELECTRIC PARAMETERS
- Excellent electric insulation
- Better contact surface
- Better ampacity at equal cross-section compared to a
cable and/or reduced cross-section at the same rated current
- Reduced heating due to the lack of crimped connections
and to better ampacity
- Excellent short-circuit resistance
RANGE
Cross-sections: from 25 mm² to 240 mm²
Lengths: from 230 mm to 930 mm
Rated ampacity: from 125 A to 630 A