The following resources come from the 2009/10 BSc in Computer and Network Technologies (course number 2ELE0072) from the University of Hertfordshire. All the mini projects are designed as level two modules of the undergraduate programmes. The objectives of this project are to demonstrate by building a virtual local area network environment: • Installation and configuration of virtual network/server operating systems (virtual) • Installation and configuration of virtual workstations (operating systems) • Ensure a suitable level of security and access control exists for the virtual network. • Ensure that the network can be easily managed. This project entails using a virtual network to demonstrate a typical setup for a networked office environment. Students are expected to be able to perform simple installation of workstation and server operating systems. Students are required to investigate important management tools on a server operating system and to configure these tools to simplify management of the network. The network environment should have a suitable level of security and access control.

9. © University of Hertfordshire 2009 This work is licensed under a Creative Commons Attribution 2.0 License . Microsoft, Windows 98, Windows XP, Windows Vista, Windows Server 2003, and Windows Server 2008 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The name of the University of Hertfordshire, UH and the UH logo are the name and registered marks of the University of Hertfordshire. To the fullest extent permitted by law the University of Hertfordshire reserves all its rights in its name and marks which may not be used except with its written permission. The JISC logo is licensed under the terms of the Creative Commons Attribution-Non-Commercial-No Derivative Works 2.0 UK: England & Wales Licence. All reproductions must comply with the terms of that licence. The HEA logo is owned by the Higher Education Academy Limited may be freely distributed and copied for educational purposes only, provided that appropriate acknowledgement is given to the Higher Education Academy as the copyright holder and original publisher. Credits This resource was created by the University of Hertfordshire and released as an open educational resource through the Open Engineering Resources project of the HE Academy Engineering Subject Centre. The Open Engineering Resources project was funded by HEFCE and part of the JISC/HE Academy UKOER programme.