2G VS 3G
DRIVE TEST WITH TEMS
LEXCORP SOLUTIONS
The document compares 2G and 3G networks and discusses performing drive tests using TEMS equipment from Lexcrop Solutions to measure key performance indicators (KPIs) such as dropped calls, call setup failure rates, handover failure rates, swapped feeders, signal strength, signal quality, and more. The TEMS equipment includes devices like the T610 and K800 for measurements, GPS, data cables, and laptops to analyze results from 2G, 3G, HSPA, and LTE networks during mobile or stationary tests.
2. Cellular Network
B D
A C
1)To obtain sufficient coverage over the entire service area to ensure that high quality
voice services and data services with low error rates can be offered to the subscribers.
2)To offer the subscriber traffic network capacity with sufficiently low blocking and call
dropping rate.
3)Keep the call from dropping as mobile move out from individual cell
5. RXQUAL Vs EC/NO
RXQUAL Ec/No
0
0
-3 dB
1
-6 dB
3
4 -10 dB
-15 dB
5
-20 dB
6
7
6. TEMS Equipment
-T610 -K800
- K800 - UMTS Scanner
- GPS - GPS
- Data Cable - Data Cable
- Serial to USB - Serial to USB
- Laptop - HSDPA Modem
- Laptop
GPS
Handset (complete with Charger, Headset, Data
Cable) and USB Hub WCDMA Scanner