1. FINISHING WORKS

2. INTRODUCTION
Finishing works is a fine job in building construction process
where it forms the beauty of a building. Several types of
finishes can be used based on the materials used,
environmental conditions and costs. Finishing of a building
can be divided into several sections:
 Floor finishing
 Wall finishing
 Ceiling finishing

3. PLASTERING
Plastering is one of the finishing of the walls. It functions as a:
• Protect / cover the basic work.
• Produce a flat surface and neatly.
• Protect the basic work of the climate action.
• A cushion to the finishing paint work and laying of tiles.
• Provide facilities for cleaning.
• Increase durability to the work of the foundation.
• Provide comfort and safety to the residents who live in it.

4. PLASTERING
CEMENT
LIME
MATERIALS
WATER SAND

5. PROCEDURES internal WALL
plastering
1. Layers of "base coat" plastering in the finished brick walls tied. This
layer is important because it will absorb water from the layers
of "finish coat" that will plastering then that the wall does not
look wet. This layer is also aimed at leveling the brick wall bond that
are less flat.
2. Layer "finish coat" will plastering later on at a thickness of 1/2’
to 1’ depending on the uniformity of the wall using a finishing trowel.
3. Finally, the layers of "plaster" will plastering with a layer
of oil (slurry cement). This mixture consists of masonry cement and
water. This layer that will highlight the aesthetic features of buildings
constructed. After the layers of cement "slurry“ plastering, it will
be painted with water using a brush to paint fine lines formed at
the wall to retain moisture in the plastering. This is necessary so that
the paint will stick to the walls painted.

6. procedures external wall
plastering
 For the exterior wall plastering made ​only
involves two layers of the "base coat“ and
"finish coat". Made for plastering the walls
outside the home is more gross and appeared.
After the layers of "finish coat", the external wall
is painted with water using a sponge. It aims to
reveal more gross wall surface.

7. EXAMPLE OF PLASTERING
INTERNAL WALL EXTERNAL WALL

8. RENDERING
Rendering works

9. Floor tiles
THERMOPLASTIC TILES VINYL ASBESTOS

10. CORK TILES CLAY TILES

11. QUARRY TILES TERAZZO TILES

12. THANK YOU