Face recognition embedded solution which can be used for time attendance, access control and user verification.

1. FACE RECOGNITION SYSTEM
F710

2. Presentation Overview
• Device Overview
• Face Recognition Technology
• Package Contents
• Device Familiarization
• Turning the Device ON
• Administrator Registration
• User Registration
• User Verification
• User Guide
• Management Software
• Device Performance
• Specifications
• Contact Us

3. Device Overview
Time
Attendance
Access
Control
User
Identification

4. Time Attendance
Access Control
User Identification
The device can mark attendance
time of users
The device can be connected to an
electric door lock & configured in a
manner that it opens only after a
successful user verification
The device can scan the face of a
user and find his identity records
saved in its database.

5. Face Recognition Technology
• There are two technologies behind face recognition being used today- 2D
& 3D technologies. 2D technology uses plane projection of actual faces &
is affected by environment light, facial expression etc. 3D technology is
more accurate but has the cons of being very expensive, complex
algorithms, requiring more storage & slow recognition.
• The technology used in F710 is called ‘Dual Sensor’ which combines the
advantages of both 2D & 3D technologies. It uses two special cameras
which are just like a person’s eyes. The technology has fast recognition
speed & high accuracy. Below given is the pictorial representation of ‘Dual
Sensor’ technology.

6. Package Contents
Product boxUser guide
Power adaptor
Installation CD RFID card
F710 device

7. Device Familiarization – Front View
Touch
keypad
IR lights
TFT
color
LCD
Cameras
Area for
swiping
RFID card

8. Keypad
Backspace
Menu
Up selection
Down selection
Escape
Enter/OK

9. Back View
Door
connection
terminal
SD card
inserting
slot
Loud
speaker

10. Back View
Power adaptor portNetwork cable port

11. Bottom View
USB port

12. Power Adaptor
To be
connected to
the device
To be
connected to
AC supply
Adaptor specifications.
Input: 110-240V AC 1A 50-60HZ
Output: 12V 3A

13. RFID Card
The RFID card can be used for user verification

14. Management Software CD
The management software can be
installed on a PC using the installation
CD provided

15. User Guide
The user guide contains all
details regarding the system

16. Turning the device ON
Connect the power cable to the
power adaptor port at the back
side of the device
Connect the other end of the
power cable to AC supply
Now the device will turn ON
automatically

17. Administrator Registration
• The first step in the operation of the device is the administrator [admin]
registration. Only admin has the option to control the device & manage
the records. Up to 5 admins can be registered in the device.
• To start with, after turning the device on, press MENU. Now the following
prompt will appear.
Press 1 on the
touchpad to set
admin
Press 1 to
set the first
admin

18. • Now the device will start the admin registration process.
• Make sure that the device is kept at a distance of 50-80 cm from the face
at the time of registration and verification.
• Follow the instructions on the screen to complete the registration.
• The system will ask ‘Register as User?’ Press OK if the admin is to be
registered as a user too. Press ESC if that is not required.
• After successful registration, the confirmation message will be displayed
on the screen.
• For admin verification, press MENU in stand by. A green circle and a
scanning brush will appear on the screen. Keep the face in such a manner
that the brush can scan it properly, at the proper distance mentioned
above. Once successfully verified, the Functions Menu will appear on the
screen.

19. User Registration
• Only admin can register, modify or delete users.
• Press MENU for admin verification. After successful verification, Functions
Menu will appear. Now proceed in the following manner.
Press 2 to select
user management
Press 1 to select
register user
Input user number. It
can be in the range
1-99999999

20. • After successful user registration, a confirmation message will be
displayed on the screen.
Input user name. It can
be up to 18 characters
long. Press ESC to toggle
between small & capital
letters
Select any one of the four
available verification options
Face: Normal user
Card: Temporary user
Pin and Face & Card
and Face: High
security level

21. User Verification
• The system automatically detects a face when it appears in front of the
camera.
• Adjust the face so that a green square is seen blinking on the screen. This
denotes that the system is attempting to verify the face. If it doesn’t
appear, then adjust the face properly. You may be too far from or too
near to the device.
• The device may show messages like ‘Adjust Your Actions’. This can happen
if the face is not steady or facial expressions need to be adjusted.
• After successful user verification, voice prompt gives a voice message
‘access granted’.
• If a face is unknown to the system, it gives the message ‘access denied’ via
the voice prompt.

22. User Guide
• The user guide provided along with the system, in printed & word
document formats, give all details regarding device configuration,
installation, admin/user management, system settings, record
management etc.
Device Configuration
Front View Figure
Elevation View Figure
Back View Figure
TFT Color LCD
Display the function menu and user information.
Exit full screen view of this
presentation, right click
here & select open
document to view the user
guide

23. Management Software
• A management software comes along with the system which can be
installed on a PC using the installation CD provided. It can be used for a
variety of functions including staff management, device management,
work shift settings, data import/export etc.
The default language of the software is Chinese. Follow these
instructions to change it to English.
Open the
software
Enter
‘admin’ in
both fields
Find a white
question mark,
click on it to
select English as
default language

24. Device Performance
• The device is highly accurate & dependable. Still, keeping in mind the
following points will aid in better device performance.
The system doesn’t have an inbuilt battery. So connect it to an
uninterrupted power supply.
In cases of uneven light conditions [more light on one side of face]
or low light conditions, the system responds correctly. But in no
light conditions [total darkness, only IR light from the device is
available] the system may reject a valid user at first but on multiple
attempts, he will be recognized successfully.
At the time of user registration if a user wears spectacles and if he
comes to the system without spectacles later, the system still
successfully recognizes him. But this doesn’t work with sun glasses.

25. In the system, data is stored in an SD card, which can be
directly connected to PC via a card reader to export data
directly PC.
SD card
The system has the facility to connect with a USB storage
device. Data including attendance logs, user list etc can be
imported from and exported to USB device in the form
of .txt files.

26. Specifications

27. Contact Us
• BioEnable Technologies Pvt. Ltd.
2nd Floor, The Avenue, Pune-Solapur Road, Hadapsar,
landmark: Opp. Mega Center, Pune 411028 MH, India
• Toll free: 1800-209-2131 (only from India)
• International Sales: +91-9326170554 or +91-9373336478
• Others call : +91-20- 26810214
• Fax: +91-20-30225587
• email: sales@bioenabletech.com (Sales Worldwide)
support@bioenabletech.com (Support Worldwide)
accounts@bioenabletech.com (Accounts Worldwide)