1. ARIE HIDAYATI JUMARI MARJONO
SENIOR HVAC ENGINEER - RESUME
SUMMARY
Since graduation in 2002, I have been working for more than ten (10) years in oil and gas industry
and manufacturing.
I had worked for Dynac Sdn Bhd almost for five (5) years as HVAC Engineer, with Petrofac-RNZ for
three (3) years as Mechanical Engineer (HVAC), with Technip Geoproduction Sdn Bhd for almost one
year, engaged with Ranhill WorleyParsons for one (1) year, with G.I Industrial Asia Holding Sdn Bhd
(fabricate of AHU) and engage with Armada ATPCE (contract engagement 3 month) until present.
During my engagement with G.I Industrial Asia Holding Sdn Bhd, I have been involved in integrated
with technical development of AHU systems, including drawings, calculations, bill of materials with
good knowledge of and experience in the MICROSOFT OFFICE / AUTOCAD / ADOBE and SAP.
I have been involved in various stages of design such as Conceptual, FEED, Detailed Design; Brown
& Green Field projects and I also had experience with offshore site visit for brownfield project.
I have a strong backgrounds in oil and gas field of onshore and offshore works both as Project
Engineer and Mechanical Engineer.
I am familiar with a range of proprietary software including AutoCAD, HAP 4.7 (HVAC) and AutoPipe
and familiar with relevant international codes and standards including ASME, ANSI, API, NFPA, PTS
and TEMA.
While working with Dynac, I was responsible for HVAC equipment such as AHU, ACCU, fans,
dampers etc from design on paper, dealing with supplier until installation at site.
I had experienced with Solidworks software for design stage when working as Researcher of
Universiti Teknologi Malaysia. Also as part time tutor at Cosmopoint for Solidworks software.
CONTACT / PERSONAL INFO.
Contact no. : 016-7257886
Address: B-01-03A blok B Suria Rafflesia, Jalan Setia Perdana U13/28 Seksyen U13 Setia Alam,
40170 Shah Alam
Email: ariehidaytijm@gmail.com
Born: 26th April 1976
Marital Status: Married
Availability: 1st
January 2017
EXPECTED SALARY
Expected Salary : RM 9000
Page 1
2. ARIE HIDAYATI JUMARI MARJONO
SENIOR HVAC ENGINEER - RESUME
EXPERIENCE
October 2016–
Present
Senior HVAC Engineer, Armada ATPCE, Miri (Sarawak)
Engagement with 3 months contract
Description : Worked as Senior HVAC engineer responsible for preparation of major documents such
as Heat Load Calculation including specification and design basis, technical data sheet, in charge for
equipment selection & motor sizing, do air flow diagram and ductwork sizing, assist drafter for
drawing preparation including as drawing checking.
March 2016 –
Sept 2016
Senior AHU Technical Engineer,G.I Industrial Asia Holding Sdn Bhd, Klang
Activities:
1. Technical development of AHU systems, including drawings, calculations, bill of materials.
2. Creation of technical drawings of complete air handling units/vertical air handling
units/ductable fan coil units, with programs based on AutoCAD and with vendors propriety
3. Design/rate main components coils / fans / motors / heat recovery wheel plate /
humidification components, with the support from suppliers if necessary
4. Interact with the Presales and sales office in order to collect all the needed technical
information about the products to be designed.
5. Interact with the Technical Dept in order to explain all the needed information for the
design of the units (incl. Bill of material and costs) with related to SAP.
6. Interact with the internal departments (Production dept) in order to explain all the needed
information for assembly the units.
7. Interact with the Technical Dept and with the suppliers in order to check with the suppliers
the possible customization of the OEM products and to collect missing information and
data about the OEM products (such as instructions, manuals and so on).
March 2015 –
Feb 2016
Senior HVAC Engineer, Ranhill WorleyParsons, Kuala Lumpur
Front-End Engineering Design (FEED) for Topsides, Pipelines and Modification at NFA
Complex for New NFA Wellhead Platform WHP-3.
Description : Worked as HVAC engineer responsible for preparation of major documents such as
Heat Load Calculation including specification and design basis, technical data sheet, in charge for
equipment selection & motor sizing, do air flow diagram and ductwork sizing, assist drafter for
drawing preparation including as drawing checking and cooperate with designer for PDMS modelling
clash free for New NFA Wellhead Platform WHP-3.
Page 2
3. ARIE HIDAYATI JUMARI MARJONO
SENIOR HVAC ENGINEER - RESUME
March 2014 –
Feb 2015
Senior HVAC engineer, Technip Geoproduction (M) Sdn Bhd, Kuala Lumpur
1. Provision of Front End Engineering Design (FEED) and Engineering, Procurement,
Construction, Installation & Commissioning (EPCIC) KASAWARI DEVELOPMENT
PROJECT.
Description : Performed as HVAC engineer responsible for preparation of major documents such
as Heat Load Calculation including specification and design basis, do equipment selection &
motor sizing, assist drafter for drawing preparation including as drawing checker and cooperate
with designer for PDMS modelling clash free for Wellhead, Topside including Living Quarters.
2. Engage with Project proposal preparation including Technical Clarification with
Procurement for Petronas project as follow:
Nosong Gas Development Project
Ubon EPCI Proposal
FEED for Sepat Gas development Project
Jan 2011 –
March 2014
Mechanical Engineer (HVAC), Petrofac – RNZ Petrofac Engineering Services
(Malaysia) Sdn Bhd, Kuala Lumpur
1. Provision of Tukau Timur Shallow Feed & Tukau Timur Deep Conceptual Engineering
Description : Perform as HVAC engineer doing prepare major documents such as Heat Load
Calculation including specification and design basis, do equipment selection & motor sizing,
assist drafter for drawing preparation including as drawing checker and cooperate with designer
for PDMS modelling clash free for Wellhead platform with HVAC Split unit & Exhaust Fan.
2. Provision Of Detailed Engineering (Phase 1) And Front End Engineering Design
(Feed)(Phase 2) For Baram Delta Gas Gathering-2 (Bardegg-2) And Baronia Enhanced Oil
Recovery (Eor) Develoment Project
Description : Perform as HVAC engineer doing prepare major documents such as Heat Load
Calculation including specification and design basis, do equipment selection & motor sizing,
assist drafter for drawing preparation including as drawing checker and cooperate with designer
for PDMS modelling clash free for Technical Building & Mini Living Quarters.
3. Provision Of Front End Engineering Design (Feed) And Detail Design Services (Optional)
For Besar Development
Description : Performed as HVAC engineer doing prepare major documents such as Heat Load
Calculation including specification and design basis, do equipment selection & motor sizing,
assist drafter for drawing preparation including as drawing checker and cooperate with designer
for PDMS modelling clash free for Technical Building & Mini Living Quarters. The scope of this
project also included brownfield project for battery room modification in scope of work.
4. Provision Of EPCIC For Bekok-C Restoration Project
Description : Performed as HVAC engineer doing prepare major documents such as Heat Load
Calculation including specification and design basis, do equipment selection & motor sizing,
assist drafter for drawing preparation including as drawing checker and cooperate with designer
for PDMS modelling clash free. The scopes of work also include Technical Bid Evaluation on
Page 3
4. ARIE HIDAYATI JUMARI MARJONO
SENIOR HVAC ENGINEER - RESUME
bidding stage including Vendor Data Incorporation (VDI) on procurement stage and review
Vendor Document & drawing.
5. Provision of Feed Services for Yetagun North Development Project.
Description: Performed as HVAC engineer responsible for preparation of major documents such
as Heat Load Calculation including specification and design basis, do equipment selection &
motor sizing, assist drafter for drawing preparation including as drawing checker and cooperate
with designer for PDMS modelling clash free for Wellhead platform with HVAC Split unit &
Exhaust Fan.
6. Provision Of PCC And Host Tie In For West Diyarbekir Project Oil Development Project
Description: Perform as HVAC engineer doing prepare major documents such as Heat Load
Calculation including specification and design basis, do equipment selection & motor sizing,
assist drafter for drawing preparation including as drawing checker and cooperate with designer
for PDMS modelling clash free for Wellhead platform with HVAC Split unit & Exhaust Fan. Also
preparation of Technical Clarification and Technical Bid Evaluation (TBE) on Bidding Stage and
conduct Vendor Data Incorporation (VDI) on Procurement Stage.
7. Provision Of Engineering And Technical Support Services For Carigali Hess Operating
Company Sdn Bhd - Detail Design of Extraction Fan For FSO Smoking Room.
Description: Performed as HVAC engineer doing assist Personnel who Perform Site Visit @ FSO
to actual condition and provided pre-site visit report as guideline. The scope of work is re-design
existing air flow diagram for FSO to ensure air flow is balanced for HVAC System and design of
new exhaust fan for FSO Smoking Room.
8. Provision of Berantai Follow On Engineering
Description: Performed as HVAC engineer with scope of work review & comment on HVAC
vendor document & drawing, coordinate communication with clients & vendor during VDR stage
and provide input for weekly project progress report.
9. Provision Of Conceptual And Basic Engineering For Diamond Development Project
Description: Performed as Mechanical Engineer responsible for preparation of major documents
such Major Equipment List as per Equipment layout on concept stage, do heat load calculation &
selection of HVAC major equipment on concept stage, preparation Specification & Data Sheet for
Launcher & Close Drain pump for concept stage, preparation Chemical Injection (Process) Data
Sheet. MR & Specification (Preliminary).
10. Provision To Upgrade And Refurbish Client Supplied Mopu on an EPCIC Contract For The
West Desaru Development Project, Block Pm 304
Description: Performed as Mechanical Engineer doing study existing P&ID, PFD, GA including
preparation Fuel Gas Datasheet, MR & Specification (Preliminary), preparation of Chemical
Injection (Process) Data Sheet. MR & Specification (Preliminary), doing furnish Equipment list
and counter check with latest equipment layout (Preliminary).
11. Provision of Detailed Design and Engineering Services Work for Modifications Of
Transformer Area at Dulang CGCE Project For Petronas Carigali Sdn Bhd (PCSB).
Description: Performed as HVAC engineer with scope of work provide contribute input on HVAC
matters, attending LDR, and contribute input HVAC on existing HVAC system for Dulang-B.
Page 4
5. ARIE HIDAYATI JUMARI MARJONO
SENIOR HVAC ENGINEER - RESUME
12. Provision Of Engineering And Technical Support Services for Carigali Hess Operating
Company Sdn Bhd for Permanent Living Quarters and Laboratory FSO
Description: Perform as HVAC engineer doing perform site visit, provide contribute HVAC input
for Functional Specification, doing study Site Visit Report and preparation HVAC input for
Functional Specification as per Project Instructions.
13. Provision Of Engineering And Technical Support Services For Carigali Hess Operating
Company Sdn Bhd for CCR & Living Quarters Purafil filter
Description: Perform as HVAC engineer doing perform Site Visit @ CKP to actual condition, liaise
with Client on HVAC design system, Attend progress meeting & discussion inter- discipline, assist
drafter to provide drawing as per deliverable list, design & coordinate HVAC drawing for both
Purafil @ Upper deck CCR & Purafil @ Top deck Living Quarters for IDC (internal) & IFR (Client
submission).
14. Chemical Warehouses At Al-Jabalayn And Palogue Fields And Security Facilities At Al-
Jabalayn Main Gate For Petrodar Operating Company Limited (PDOC)
Description: Performed as Mechanical Engineer doing preparation Mechanical document
submission (including incorporated Client comment) as per deliverable list & coordinate
document, coordinate Mechanical Drawing submission (including incorporated Client comment)
as per deliverable list & report to Project Engineer including assist drafter to prepare Mechanical
drawing.
15. Provision Of Detailed Design Services (Phase II) for Kinabalu Non Associated Gas (NAG)
Project for PETRONAS Carigali Sdn Bhd (PCSB).
Description: Performed as HVAC engineer making incorporated comment as per LDR request
from Client, attending PDMS review, including assist drafter to prepare HVAC drawing & update
HVAC drawing (Approved for Construction) as per latest PDMS model & LDR, Up-rev (Approved
for Bid) HVAC specification c/w Datasheet & incorporated comment from Client for IDC & AFC
rev.
16. Engineering, Procurement, Installation And Commissioning (EPIC) Of Wellhead Platform
LAM C For ILK Insaat / Dragon Oil Turkmenistan Ltd.
Description: Perform as HVAC engineer doing assist HVAC senior engineer & assist PDMS
engineer to update model as per Client request including update HVAC drawing as per latest
PDMS model, up-rev HVAC Equipment Data Sheet, checking Cooling capacity using E20
Software.
Oct 2006 – Dec
2010
Mechanical HVAC Engineer, Dynac Sdn Bhd, Pasir Gudang - Johor
RESPONSIBILITY:
Assist HOD to make list of Material take off of major HVAC equipment for new project.
Lead and assist DCC to submit drawings & document.
Doing HVAC design system by doing Heat Load Calculation.
Doing HVAC design calculation to assist to select major equipment such fan, coil & motor.
Doing verification of the HVAC system Noise level by Noise Calculation.
Doing Preparation of documents as per VDRL.
Check drawings for both Client submission & fabrication (shop drawing) purpose.
Dealing with supplier for major equipment.
Page 5
6. ARIE HIDAYATI JUMARI MARJONO
SENIOR HVAC ENGINEER - RESUME
As focal point dealing with client from start till finish of project including being involve on the preparation of
final document.
PROJECT INVOLVE:
1. Gumusut Kakap Topside Project for MMHE & SSPC.
HVAC system for Living Quarters & 10 (ten) Miscellaneous Building.
2. St. Joseph Redevelopment Project. for Brooke Dockyard & SSB.
HVAC system for Living Quarters & Satelit platform
3. Cili Padi Gas Field Development Project for PfcE & SSB.
HVAC system including Exhaust fan & Pressurization Fan for F23 R-A platform.
4. F23VLAP Compression Module for SDE & SSB.
Project description: HVAC system including Exhaust fan & Pressurization Fan for F23 platform
5. HVAC SYSTEM for B11 K-A Topside Project for MMHE & SSB.
HVAC system including Exhaust fan & Pressurization Fan for B11 platform
6. JDA B17 development Project for Kencana HL & CPOC.
HVAC system for Living Quarters of JDA platform.
7. Bugan Development Project for Aishah Automation & Brunei Shell
HVAC system for Bugan platform.
8. F23 Living Quarters Facilities & Pipelines Project for Brooke Dockyard & SSB
HVAC system for Living quarters F23 Platform.
9. F6 Living Quarters Facilities & Pipelines Project for Brooke Dockyard & SSB
HVAC system for Living quarters F6 Platform.
10. BO-A Central Processing Platform ( BO-A CPP) for Sime Darby Engineering & Talisman
HVAC system for Living quarters of Bunga Orkid Platform.
11. Baram South Development For E & I Shed BAJT-H for Ramunia Fabricator & Petronas.
Split Unit System E & I Shed BAJT-H.
12. Containerized Equipment Project (CER) for Aishah Automation & Brunei Shell
HVAC system for MMDP1, MGCP1 & MGCP GSR platform.
13. SCDR-A Topside Project for MMHE & SSB.
HVAC system including Exhaust fan & Pressurization Fan.
14. Bumi, Bulan, & Suriya Development for Kencana HL & CPOC.
Project description: Split Unit System for Bumi, Bulan & Suriya Platform.
EDUCATION
B.Eng. (Hons) in Mechanical Engineering from University Teknologi Malaysia, Skudai, Johor, in 2002
Page 6
7. ARIE HIDAYATI JUMARI MARJONO
SENIOR HVAC ENGINEER - RESUME
REGISTRATIONS/AFFILIATIONS
Board of Engineers Malaysia (BEM): Registered Graduate Engineer with Register no.: 90733R.
PUBLICATIONS/PRESENTATIONS
Papers or articles in industry publications (N/A)
Papers presented at industry conferences (N/A)
Books written for the industry (N/A)
SPECIFIC TECHNICAL EXPERTISE/SPECIALIST COURSES
Experience as HVAC engineer for 10 (ten) years with Vendor and Consultant Oil & Gas company.
Page 7