Apollo Insulation foils reflect more than 96% of radiating heat, reduce carbon emissions and last for life.
They are used for building insulation, pipe and vent insulation and cladding, foam panel and sandwich panel insulation.
Scanning the Internet for External Cloud Exposures via SSL Certs
Apollo Insulation Aluminum Composite Foils - Catalog 2012
1. made
in UK Insulation & Carbon Emission Reduction for Life
ECO-FOIL™ THERMO-FOIL ES™
ECO-BRITE™ ENCA-SEAL™
ENCA-CLAD™ INSUFLECT™
TERRETHENE™ ADHESIVE TAPES
BS476
fire rated
w w w. t r a d i n g g r e e n l t d . c o m
2. Standard ThermoFoil®ES ThermoFoil® Tape Eco-Brite® Agriliner™ EncaSeal™ 150PE EncaSeal™ Tape EncaClad™ EcoFoil™ Terrethene™
floor, ceiling, floor, ceiling, roof, roof: livestock indoors: pipes, A/C ducts, outdoors: indoors ceiling,
Recommended usage roof, walls sub-surface
in UK
made
roof, wall wall houses ducts, vents pipes, tanks pipes/ducts/vents walls
Reflectivity ASTM E903 96.7% 96.1% 96.1% 96.7% 96.1% 96.1% 96.1% 96.0%
Emissivity ASTM E408 0.046 0.048 0.048 0.046 0.048 0.048 0.048 0.05
Manufacturer guarantee (years) 20 20 20 20 20 20 20 10 20
Expected lifespan (years) 60+ 60+ 60+ 60+ 60+ 60+ 60+ 20+ 60+
Carbon Emissions Saved per SQM, per year up to 23kg up to 23kg up to 23kg up to 23kg up to 23kg up to 23kg up to 23kg up to 23kg
Roll size (widht x length) 1.25m x 96m 1.25m x 96m 100m x 5cm 1.25m x 96m 1.25m x 96m 1.25m x 96m 100m x 5cm 1.25m x 33m 1.25m x 96m 1.195m x 50m
Roll surface in SQM 120m2 120m2 5m2 120m2 120m2 120m2 5m2 41.25m2 120m2 60m2
Roll weight kg 18 1.1 18 18 20 1.1 20 18 24.8
Nominal thickness microns 145 145 135 145 150 150 345 91 460
ASTM D882
Tensile MD 6.620kN/m 3.905kN/m 3.905kN/m 6.620kN/m 6.620kN/m 6.620kN/m 5.900kN/m N/A 9.45kN/M
Tear resistant machine direction
Trouser tear MD 33.1N N/A 10.2N 33.1N N/A N/A N/A N/A
Elongation at break MD 222.60% N/A 232.80% 222.60% N/A N/A N/A N/A
ASTM D882
Tensile CD 5.487kN/m 4.096kN/m 4.096kN/m 5.487kN/m 5.000kN/m 5.000kN/m 4.900kN/m N/A
Tear resistant cross direction
Trouser tear CD 33.9N N/A 15.6N 33.9N N/A N/A N/A N/A
Elongation at break CD 210% 150% 100.40% 210% 150% 150% N/A N/A
Beach Puncture Resistance 40.1kg-cm 40.5kg-cm 40.5kg-cm 40.1kg-cm 40.5kg-cm 41.1kg-cm 40.0kg-cm
Moisture/vapour transmission rate ASTM E96, Procedure B, MVTR 0.021g/m3 0.045g/m3 0.045g/m3 0.021g/m3 0.021g/m3 0.021g/m3 0.020g/m3 <2g/ m²/24hrs 0.01g/m2/24h
Corrosion resistant Unique surface coating
UV resistant Tested for the equivalent of 30 years at 100% humidity & 100% UV Tested for 20 years
Te c h n i c a l S p e c i f i c a t i o n s
Fire Propagation BS476 Part 6 Class 0 Class 0 Class 0 Class 0 Class 0 Class 0 Class 0 N/A
w w w. t r a d i n g g r e e n l t d . c o m
Surface Flame Spread BS476 Part 7 Class 1 Class 1 Class 1 Class 1 Class 1 Class 1 Class 1 N/A
Temperature resistant -50°C to +127°C -50°C to +127°C -50°C to +127°C -50°C to +127°C -37°C to +127°C -37°C to +127°C -35°C to +127°C -35°C to +127°C -20°C to +80°C
Cross-Laminated Valeron® Core YES NO YES YES YES NO YES YES NO
Chemical resistant Approved concentrated disinfectants
Methane transmission <0.005cm3/h/m2
Oxygen transmission Nil
N/A
Radon improvement factor 500-1
CBR 708N
3. EcoFoil®
Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core
designed for high cost-effectiveness
insulates from radiant heat and cold
flexible enough to seal soft insulation
10 years guarantee, life >20 years*
EcoFoil® is manufactured in an ISO 9001 factory in the EcoFoil® acts as an excellent vapor barrier to seal new or
UK, by high pressure bonding a multilayer of highly existing soft insulation. Ensuring insulation performance
reflective aluminum foil with tough-tear resistant core, is not compromised by interstitial condensation, which
especially designed to act as solar radiation, vapor and would otherwise reduce insulation performance and
gas barrier in hot and humid climates. could cause damage to the overall construction.
Application ex.: ceiling insulation
EcoFoil® can be stapled on the upper side of
ceiling panels. It will reflect 96% of heat coming
through the roof. Cut the foil on site to the
ceiling panel’s shape , staple it in place: the
ceiling instantly becomes a heat shield, for up to
20 years (tested in UV accelerator).
Application ex.: insulation encapsulation
EcoFoil® is designed to encapsulate fiber
insulation, to enhance the overall product
properties. Inner layers can be heat sealed to
themselves or to other materials. Can be
incorporated into manufacturing processes.
Application ex.: modular buildings
EcoFoil® is an ideal insulation for prefabricated
buildings, recycled containers and other modular
buildings.
Easy to install on site under the roof and inside
wall panels, even under the floor, it will conserve
energy in both hot and cold climates.
* the foil is guaranteed not to delaminate or lose performance during 10 years when applied properly.
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
4. EcoFoil®
Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core
Recommended application: roof insulation
EcoFoil® is a radiant barrier: it needs to be installed facing at
least one air space, from 19mm to 25mm deep.
The foil blocks solar heat striking a roof from conducting
Eco-Foil® through the tiles and insulation layers. Without Eco-Foil ®,
heat crosses any air spaces as unwanted infrared energy,
warming the inner skin of the structure and overheating the
room.
Recommended application: wall insulation
Eco-Foil® is a two sided single foil for use as a heat reflective lining
within the fabric of sustainable homes, most prefabricated
domestic and commercial building components including portable
and modular structures.
Eco-Foil® has an emissivity of only 0.05: 96% of radiant heat or
cold is reflected back.
Eco-Foil® The membrane eliminates excessive heat gain caused by incoming
solar radiation yet can keep the room warm during cold weather.
No matter the season, room temperatures are far easier to control
The foil has been designed and tested to last for more than 20
years at 100% UV and 100% humidity exposure.
Emissivity 0.05
Reflectivity 96%
Roll Size 96m x 1.25m 120m²
Nominal Thickness 91 microns ±10%
Moisture/vapour Transmission Rate (ASTM E96,
<2g/ m²/24hrs
Procedure B, MVTR)
UV resistant Tested for the equivalent of 20 years at 100% humidity and 100% UV
Optical density 2.2 ± 0.2
Oxygen permeability <2cc / m2 / 24hrs
Eco-Foil is ideal for insulating modular
and pre-fabricated buildings. Sales contact:
Trading Green Ltd.
Phone: +66 (0) 2660 3601
Fax: +66 (0) 2660 3881
Email: info@tradinggreenltd.com
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
5. ThermoFoil®ES
Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core
high-performance hot & cold insulation
extreme tear resistance
based on NASA technology
20 years guarantee, life >60 years
Grand Mosque Abu Dhabi Raffles Hotel Singapore Mattel Factory Thailand
Livestock houses USA Ministry of Foreign Affairs Sony Head Office Building Cold storage insulation UK
Abu Dhabi
reflectivity 96.7%
Beijing Olympics 2008 Roof insulation UK
emissivity 0.046
moisture transmission rate 0.021g/m2
cuts building energy consumption
offsets carbon emissions
CARBON smart green
OFFSET product
6. ThermoFoil®ES
Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core
Insulated metal sheet
or cement fiber tile Recommended application:
roofs in tropical countries
ThermoFoil®ES
Thermo-Foil®ES is a radiant barrier: it needs
to be installed facing at least one air space,
from 19mm to 25mm deep.
Roof structure
When used in conjunction with PE foam, PU
foam, fiberglass or solar reflective roof
coatings, Thermo-Foil®ES can improve the U-
Value of that structure by up to 20% in
tropical weather conditions.
Recommended application:
cold storage facilities
Thermo-Foil®ES is ideal for insulating cold
storage warehouses walls and roofs without
adding thickness to the structure.
It is recommended to place a layer of
ThermoFoil®ES on either side of the soft
insulation panels to reflect heat back
outside and cold back inside.
The foil is bug proof and will not attract mold
or fungi. It is also an excellent moisture and
dust particles barrier, making it ideal for
structures where safety is a priority, such as
pharmaceutical and food and beverage.
Reflectivity (ASTM E903) 96.70%
Emissivity (ASTM E408) 0.046
Carbon Emissions Saved 23kg on un-insulated wall, 12.33kg on insulated wall per sqm per annum
Roll Size and Weight 96m x 1.25m 120m² 18 kg
Nominal Thickness 145 microns
Tear Resistant Machine Direction (MD) (ASTM D882) Tensile MD 6.620kN/m, Trouser tear MD 33.1N, Elongation at break MD 222.6%
Tear Resistant Cross Direction (CD) (ASTM D882) Tensile CD 5.487kN/m, Trouser tear CD 33.9N, Elongation at break CD 210%
Beach Puncture Resistance (ASTM D774) 40.1kg-cm
Moisture/vapour Transmission Rate (ASTM E96,
0.021g/m²
Procedure B, MVTR)
Corrosion resistant. Unique surface coating
UV resistant Tested for the equivalent of 30 years at 100% humidity and 100% UV
BS476 Part 6 Fire Propagation Class 0
BS476 Part 7 Surface Flame Spread Class 1
Temperature Resistant -50°C to +127°C
Cross Laminated Valéron® Core Yes: prevents aluminum and anti-tarnish layers from tearing
Pressure Wash Resistant 207 bar at 300mm
Chemical Resistant Tested with approved concentrated disinfectants.
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
7. Eco-Brite®
Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core
roofing & wall insulation
flexible, easy to install on site
based on NASA technology
20 years guarantee, life >60 years
Grand Mosque Abu Dhabi Raffles Hotel Singapore
Eco-Brite® being installed in modular buildings in the UK. Ministry of Foreign Affairs Sony Head Office Building
Abu Dhabi
reflectivity 96.1%
Beijing Olympics 2008 Roof insulation UK
emissivity 0.048
moisture transmission rate 0.045g/m2
cuts building energy consumption
offsets carbon emissions
CARBON smart green
OFFSET product
8. Eco-Brite®
Insulating Aluminum Composite Foil with Cross-Laminated Valéron® core
Recommended application:
roofs in tropical countries
Eco-Brite® is a radiant barrier: it needs to be
installed facing at least one air space, from 19mm
to 25mm deep.
Eco-Brite® The foil blocks solar heat striking a roof from
conducting through the tiles and insulation layers.
Without Eco-Brite ®, heat crosses any air spaces
as unwanted infrared energy, warming the inner
skin of the structure and overheating the room.
Recommended application:
modular homes & buildings
Eco-Brite® is a two sided single foil for use as a
heat reflective lining within the fabric of
sustainable homes, most prefabricated domestic
and commercial building components including
portable and modular structures.
Eco-Brite® has an emissivity of only 0.048: 96.1%
of radiant heat or cold is reflected back.
Eco-Brite® The membrane eliminates excessive heat gain
caused by incoming solar radiation yet can keep
the room warm during cold weather. No matter
the season, room temperatures are far easier to
control
The foil has been designed and tested to last the
lifetime of a house.
Reflectivity (ASTM E903) 96.10%
Emissivity (ASTM E408) 0.048
Carbon Emissions Saved 23kg on un-insulated wall, 12.33kg on insulated wall per m2 per annum
Roll Size and Weight 96m x 1.25m 120m² / 18.72 kg
Nominal Thickness 135 microns
Tear Resistant Machine Direction (MD) (ASTM D882) Tensile MD 3.905kN/m, Trouser tear MD 10.2N, Elongation at break MD 232.8%
Tear Resistant Cross Direction (CD) (ASTM D882) Tensile CD 4.096kN/m, Trouser tear CD 15.6N, Elongation at break CD 100.4%
Beach Puncture Resistance (ASTM D774) 40.5kg-cm
Moisture/vapour Transmission Rate (ASTM E96,
0.045g/m².
Procedure B, MVTR)
Corrosion resistant Unique surface coating
UV resistant Tested for the equivalent of 30 years at 100% humidity and 100% UV
BS476 Part 6 Fire Propagation Class 0
BS476 Part 7 Surface Flame Spread Class 1
Temperature Resistant -50°C to +127°C
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
9. Enca-Seal®
Insulating Aluminum Composite Adhesive Membrane with Cross-Laminated Valéron® core
air-conditioning duct insulation
adhesive side for easy installation
based on NASA technology
20 years guarantee, life >60 years
Grand Mosque Abu Dhabi Raffles Hotel Singapore
Enca-Seal® wrapped around an air-conditioning vent. Ministry of Foreign Affairs Sony Head Office Building
Abu Dhabi
reflectivity 96.1%
Beijing Olympics 2008 Canadian embassy Abu Dhabi
emissivity 0.048
moisture transmission rate 0.021g/m2
cuts building energy consumption Factory A/C ducts in UK
offsets carbon emissions
CARBON smart green
OFFSET product
10. Enca-Seal®
Insulating Aluminum Composite Adhesive Membrane with Cross-Laminated Valéron® core
Multi-layered composite foil
with high-performance adhesive
Enca-Seal®
● Impermeable surface finish
● 12 micron bright aluminum
● Two part curing adhesive
● Valéron® 100 micron, cross-laminated
installation example for hot ● High performance self adhesive
and cold pipe insulation
● Paper release liner
Enca-Seal®
Recommended application:
air-conditioning ducts
• typical HVAC systems can double energy bills
through inefficiencies
• heat loss and gain can be reduced by 90% by
insulating warm and cooled pipework or
valves
• in typical office setup, the HVAC system
contributes to 50% of the total energy costs
• over time infrared and ultraviolet energy
breaks down the surface of most foam and
installation example for air-
rubber insulation, shortening its life and
conditioning vent insulation properties (data source: Carbon Trust 2008).
This is prevented by using Enca-Seal.
Reflectivity (ASTM E903) 96.10%
Emissivity (ASTM E408) 0.048
Roll Sizes and Weight 96m x 1.25m 120m² / 20 kg
33m x 1.25m – 41.25m² / 7.5kg
Nominal Thickness 130 microns (or 150 microns for Enca-Seal® 150PE)
Tear Resistant Machine Direction (MD) (ASTM D882) MD of 6.0kN/m
Tear Resistant Cross Direction (CD) (ASTM D882) CN 5.0kN/m
Beach Puncture Resistance (ASTM D774) Beach puncture of 40.1kg-cm
Moisture/vapour Transmission Rate (ASTM E96,
0.021g/m²
Procedure B, MVTR)
Corrosion resistance Unique surface coating
UV resistance Testing for the equivalent of 30 years at 100% humidity & 100% UV
BS476 Part 6 Fire Propagation Class 0
BS476 Part 7 Surface Flame Spread Class 1
Temperature Resistance -37C to +127°C
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
11. Enca-Clad ™
Insulating Aluminum Composite Adhesive Cladding with Cross-Laminated Valéron® core
piping & duct outdoors cladding
adhesive side for easy installation
based on NASA technology
20 years guarantee, life >60 years
Grand Mosque Abu Dhabi Raffles Hotel Singapore
Enca-Clad™ : external ducting in UAE. Ministry of Foreign Affairs Sony Head Office Building
Abu Dhabi
reflectivity 96.1%
Beijing Olympics 2008 Canadian embassy Abu Dhabi
emissivity 0.048
moisture transmission rate 0.020g/m2
cuts building energy consumption Pre-insulated pipes
offsets carbon emissions
CARBON smart green
OFFSET product
12. Enca-Clad
Insulating Aluminum Composite Adhesive Cladding with Cross-Laminated Valéron® core
™
Multi-layered composite foil
with high-performance adhesive
Enca-Clad®
● Impermeable surface finish
● 25 micron bright aluminum
● Two part curing adhesive
● Valéron® 300 micron core, cross-laminated
installation example for hot ● High performance self adhesive
and cold pipe insulation
● Paper release liner
Enca-Clad®
Recommended application:
external ducting
• Enca-Clad™ is a durable 345 micron
membrane designed to completely encase
external insulated or un-insulated structures,
pipelines and ducts
• can also be used to clad flat surfaces and large
storage tanks
• other uses include transport, marine and OEM
applications
• aluminum surface of Enca-Clad™ has a special
UV resistant coating : bright surface never
installation example for air- tarnishes
conditioning vent insulation • 100% waterproof, mold and bacteria proof:
suitable for food preparation areas
Reflectivity (ASTM E903) 96.10%
Emissivity (ASTM E408) 0.048
Roll Size and Weight 1.25m x 26.4m / 33m²
Nominal Thickness 345 microns
Tear Resistant Machine Direction (MD) (ASTM D882) Tensile MD 5.900kN/m
Tear Resistant Cross Direction (CD) (ASTM D882) Tensile CD 4.900kN/m
Beach Puncture Resistance (ASTM D774) 40.0kg-cm
Moisture/vapour Transmission Rate (ASTM E96, Procedure
0.020g/m²
B, MVTR)
Corrosion resistance Unique surface coating
UV resistance Tested for the equivalent of 30 years at 100% humidity & 100% UV
Temperature Resistance -35°C to +127°C
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
13. Insuflect
Insulating Aluminum Composite Membrane with Cross-Laminated Valéron® core
™
foam panel insulation
kraft paper side for foam adherence
based on NASA technology
20 years guarantee, life >60 years
Cold storage sandwich panels Raffles Hotel Singapore
Insuflect™ insulates pharmaceutical goods in Pfizer Modular structures Canadian embassy Abu Dhabi
warehouses in the United Kingdom.
reflectivity 96.7%
Frozen food warehouse, USA
emissivity 0.046
Cabin offices
moisture transmission rate 0.021g/m2
reduces energy consumption
offsets carbon emissions
CARBON smart green
OFFSET product
14. Insuflect
Insulating Aluminum Composite Membrane with Cross-Laminated Valéron® core
™
High insulating performance, for life A perfect Vapor Control Layer Reasons for choosing Insuflect™
Insuflect™ is an aluminum composite Insuflect reflects 96.7% of radiant Insuflect™ can reflect heat radiating
membrane with a kraft paper side heat / cold back, and provides a 100% through walls and roofs from solar
designed to insulate foam panels, for waterproof membrane with a very radiation, keeping buildings cool in
the life of a building. low 0.021g/m moisture transmission warm weather.
rate. It offers a perfect protection to
The 12.5 micron aluminum foil is When used in conjunction with foam
the foam insulation against humidity.
coated with a proprietary film that is panels to insulate cold storage
guaranteed to stay bright and never Reduce Carbon Emissions with warehouses, wall, ceiling and door
to tarnish for more than 60 years. Insuflect™ panels, Insuflect™ keeps heat out and
also prevents air-conditioned cold air
This foil is bonded to a 100 micron Insuflect™ has been independently
from escaping, reducing energy costs.
cross-laminated extra-tough Valeron® tested to save 12.33kg of CO2
core, then bonded to an 80 gram emissions per square meter (sqm) per The combined benefit of keeping heat
stout kraft paper. The paper acts as an year. On un-insulated solid and cavity out and conserving cold can lead to
interface allowing foam insulation to walls, savings can total 18.2kg of CO2 substantial savings on air-conditioning
adhere to the foil. per sqm. When used on both sides of consumption.
a foam board, these figures are
Insuflect™ is ready-to-use in industrial
doubled!
bonding processes to foam boards.
Multi-layered composite foil
for foam panel insulation
foam insulation
● Impermeable surface finish
● 12.5 micron bright 98% pure aluminum
● Two part curing adhesive
● 100 micron Valeron® polypropylene core
Above: wall installation example of Insuflect™ bonded to each ● 80gr Kraft paper interface for foam adherence
side of a white foam board, in a hot climate country.
Reflectivity (ASTM E903) 96.70%
Emissivity (ASTM E408) 0.048
Roll Sizes and Weight 96m x 1.25m 120m² / 20 kg
Nominal Thickness 230 microns
Tear Resistant Machine Direction (MD) (ASTM D882) Tensile MD of 6.0kN/m
Tear Resistant Cross Direction (CD) (ASTM D882) CD 5.0kN/m
Beach Puncture Resistance (ASTM D774) Beach puncture of 40.0kg-cm
Moisture/vapour Transmission Rate (ASTM E96,
0.021g/m²
Procedure B, MVTR)
Corrosion resistance Unique surface coating
UV resistance Testing for the equivalent of 30 years at 100% humidity & 100% UV
BS476 Part 6 Fire Propagation Class 0
BS476 Part 7 Surface Flame Spread Class 1
Temperature Resistance -37C to +127°C
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
15. Terrethene ™
Insulating & Waterproofing Aluminum Composite foil with Cross-Laminated Valéron® core
Sub-surface insulation
Waterproof & Gas-proof
Lifespan >60 years
Grand Mosque Abu Dhabi Ministry of Foreign Affairs
Abu Dhabi
Terrethene™ at Royal Botanical Gardens, Oman. Beijing Olympics 2008 Sony head office.
100% waterproof barrier below buildings
low methane/gas permeability <0.005cm²/hm²/atm
low moisture/vapour transmission rate 0.01g/m² in 24h
Radon improvement factor 500:1
temperature resistance from -20°C to +80°C
CARBON smart green
OFFSET product
16. Terrethene
Insulating & Waterproofing Aluminum Composite foil with Cross-Laminated Valéron® core
™
Benefits of fitting Terrethene™ under a building:
100% water-proof barrier under buildings
Radon gas barrier under buildings
Liner for commercial fish farm ponds
Gas barrier for landfill sites to prevent the migration of methane and carbon dioxide gases
Liner for SUDS (Sustainable Urban Drainage System) trenches
Water trap layer under golf greens and sports pitches to prevent water seepage into the sub-soil
Water-proof stratum for roof gardens
Liner for reed beds
Meets BS Standards for DPC, NHBC Approved
Terrethene™ has been developed for sub-surface applications. It is a multi-layered membrane made from
polyethylene, aluminum foil and high tensile woven substrates that block the migration of vapour, moisture,
water and various environmentally harmful gasses. These laminated films combine to form a membrane that
protects against Methane (CH4), Carbon Dioxide (CO2) and Radon gases.
An additional benefit is the partial plastic memory, which allows the membrane to be used in three dimensional
detailing of building structures where conventional gas membranes will not profile.
Trigger levels from which a gas barrier is needed are as follows: Methane 1 % by volume in air (5% being the
lowest explosive level – L.E.L), Carbon dioxide 1.5% by volume in air and radon in designated areas where the
Becquerel’s level is above 200.
Direct comparison between Terrethene™ and HDPE Sheeting shows Therrethene has 100,000 times the
barrier performance of 250 micron HDPE.
Material Terrethene™ HDPE HDPE
Thickness 460 micron 250 micron 500 micron
Methane and Natural Gas Transmission 0.005cc/m2/day 500cc/m2/day* 25cc/m2/day*
*Data obtained from British Gas
Summary of ASTM and BS certifications
Roll Size 1.195 x 50 m 24.8kg
Thickness 460 micron +/- 10 micron
Moisture/Vapour Transmission Rate 0.01 g/m2 / 24 hours
Tensile Strength 9.45 kN/m
Methane Transmission Less than 0.005cm3/h/m2
Oxygen Transmission Nil
Radon Improvement Factor 500 -1
CBR 708N
Water Barrier 100%
Temperature Resistant -20oC to + 80oC
Terreseal™ Gas Barrier Tape 70mm wide x 24m roll
Terreflex™ Adhesive Membrane 1.050m wide x 28.6m roll
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
17. Adhesive Tapes Insulating Adhesive Aluminum Composite Tapes
high performance adhesive aluminum tapes
insulate from radiant heat and cold
20 years guarantee, life >60 years
designed for use in buildings
UK-based aluminum composite foil manufacturer Apollo Insulation Ltd. has developed two high-performance, heat-
reflective adhesive tapes for the building sector: ThermoFoil Tape and EncaSeal Tape. Both have been designed to
last more than 20 years.
One side of Apollo Insulation Tapes is coated with a specially developed waterproof acrylic adhesive with a release
liner. Once in position, the adhesive is formulated to migrate into the tarnish-proof coating, where it sets quickly and
provides a life-long, watertight bond.
ThermoFoil Tape: general use adhesive tape
ThermoFoil Tape is designed as a seal, to join adjacent sheets of ThermoFoil ES,
EcoBrite, EcoFoil, Insuflect and other aluminum foils. It is also recommended for sealing
around stud-work, doors and window frames. The tape will prevent air infiltration and
insure buildings meet mandatory air pressure tests. The special curing adhesive will
bond strongly with any substrate for the tape’s entire lifespan.
Recommended use: standard foil installation in domestic and commercial buildings, in
floors, ceilings, roofs and walls.
EncaSeal Tape: UV-resistant, fire resistant adhesive tape
EncaSeal Tape’s aluminum surface is coated with a patented coating that ensures its UV
resistance for life: its bright side never tarnishes. EncaSeal Tape is 100% water-proof,
bug-proof and achieved a Class 0 BSA476 fire rating, the best score attainable.
EncaSeal Tape has a strong, high density polyethylene (HDPE) substrate core which
ensures a long life and keeps wastage to a minimum during installation.
EncaSeal Tape can be used independently or in conjunction with Apollo Insulation
EncaSeal aluminum composite foil. It can be installed onto ducting carrying hot air at
130˚C without delaminating or coming away from the insulation. It has been tested with
approved concentrated disinfectants and can be pressure-washed up to 207 bar at
300mm.
Recommended use: air-conditioning ducts, pipework, storage tanks.
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com
18. Adhesive Tapes Insulating Adhesive Aluminum Composite Tapes
Properties ThermoFoil Tape EncaSeal Tape
Nominal Size per roll 100m x 50mm 100m x 50mm
Nominal Weight per roll 5m2 – 700g 5m2 – 950g
Thickness without release liner 45 micron 150 micron
Reflectivity 96.1% 96.1%
Emissivity 0.048 0.048
Fire Resistance Not tested BSA476 parts 6 and 7
Peel Adhesion – PSTC-1 11.4 N/25mm 11.4 N/25mm
Shear Adhesion – PSTC-7 Indefinite at 15.2 k/Pa Indefinite at 15.2 k/Pa
Tensile Strength PSTC-31 99.4 N/25mm 99.4 N/25mm
Elongation 150% 150%
Maximum Temperature +127˚C +127˚C
Minimum Temperature -37˚C -37˚C
Release Liner 75g 75g
Tear Resistance Tensile MD 3.905kN/m Tensile MD 6.620kN/m
Puncture Resistance 40.5kg-cm 41.1kg-cm
Moisture/Vapour
0.045 g/m2 0.021 g/m2
Transmission Rate
Sales contact:
Trading Green Ltd.
Phone: +66 (0) 2660 3601
Fax: +66 (0) 2660 3881
Email: info@tradinggreenltd.com
Exclusively imported by Trading Green Ltd., Interchange 21 Building, 32nd Floor, 399 Sukhumvit Road, North Klongtoey, Wattana, Bangkok 10110 Thailand.
Office: +66 (0) 2660 3601 Fax: +66 (0) 2660 3881 Email: info@tradinggreenltd.com Internet: www.tradinggreenltd.com