BAHAELDIN CV.

Grow by being the Forefront Page 1 of 5
Bahaeldin Siddiq Abdalhaleem Ali
Senior Protection Engineer (Electrical)
Qualifications
Education
B.Sc. in Electrical Engineer, University of Sudan, November 2006,
Khartoum, Sudan
Certifications / Associations
· SAUDI ARAMCO Contractor Card No. 8080699
· SAUDI ARAMCO Safety Orientation Certificate No. 83919.
· Operation and Maintenance of Power Generation
Equipments and Distribution Control System (DCS).
· Diploma in Programmable Logic Controller (PLC) System.
(Hardware and Software of PLC System)
· Operation and Maintenance of Electrical Equipments.
· Electrical Power System Protection.
· Certified of Omicron Injection device covering:
I. Protective Relay Testing using CMC-356.
II. Substation Testing using the CPC 100.
III. Transmission Line Testing using the CU1.
IV. Current Transformer Testing using the CT1.
· Feeder Relay, Transformer Relay, Distance Relay and Busbar
Relay (NR type).
· MICOM Protection Devices and NSD500 Control Device /
NS2000 Substation Automation System.
· IOSH Working Safely.
Registrations
· Member of Saudi Council of Engineers (SCE)
· Member of Sudan Engineering Council (SEC)
· Saudi Driving License (valid until 01 April 2018)
· Sudan Driving License.
Information
Years of Experience
10 Years
Date of Birth
17 July 1983
Nationality
Sudanese
Languages
Arabic, English
Current Position
Ten (10) years of experience in Power
System Engineering Department,
working as a Senior Protection
Engineer. Specialist in High Voltage
substation, technical approvals,
construction & site works, installation,
testing, commissioning and putting into
operation till handing over. continuous
learning and adding values to myself
and others, ability to organize, prioritize
and work under extreme work pressure,
heavy work load and deadlines, high
skills in team work, friendly, hope to
make real change.
With three (3) years of experience in
Saudi Arabia, Saudi Aramco project,
Upgrade Power Transmission System,
Southern Area Oil Operations Project
(SAOO), BI-10-00865.
Involved in the project technically,
working around different areas inside
Saudi Aramco facilities during hard
seasons and in rural places, reveiw of
protection schemes and commissioning
activities for HV/MV substations,
transmission line, and distribution
networks.
Also involved in tender documents
preparation and design approvals.
Reporting to the Engineering manager
and holding/ attending various
meetings, factory and site acceptance
tests, vendors selection process...etc.
Achieving different activities like staff
training, performance appraisal, project
profile preparation, negotiation,
contractor selection.
Present Address: Dammam KSA.
E-Mail: bahaprotection77@gmail.com
Phone: +966562026058

Experience
AlGihaz Company for Contracting and Trading and Tourism Ltd, (2013 - Present)
Assumed the responsibility of Senior Protection Engineer in AlGihaz Industrial Project Business Unit.
Such multitasked role includes dialogue with clientele, preparation for basic and detail design of 50%,
90% and IFC Packages, review of detail design 50%, 90% and IFC packages, technical requirements,
review of all nonmaterial requirements packages (NMR's), review of protection diagrams,
interconnection diagrams along with the cable schedules, prepare protection modification, red line
and mark-up drawings, and involved in the planning schedule for activity preparation and
finalization, shutdown schedule preparation, bidding meetings, site visits. Involved in new projects
site visit, estimation.
Sudanese Electricity Transmission Company (SETCO) (2009 - 2013)
High Voltage Protection Engineer (Electrical)
Assumed responsibilities for the protection systems of the whole Transmission network from scheme
and configuration, type selection, installation and commissioning, maintenance and repairing,
trouble shooting up to development and establishing new ideas, involved in all projects by approving
the proposed schemes and equipments.
National Electricity Corporation (NEC) - Sudan (2007 - 2009)
Protection Engineer (Electrical)
Assumed responsibilities for the protection systems of the whole network Generation, Transmission
and Distribution protection system, scheme and calculations provider, maintenance and
troubleshooting specialist, commissioning for new items, Transmission-Distribution and Generation
protection systems familiarity with coordination skills, testing for primary/secondary of any electrical
equipment or scheme, reporting to the division manager and providing training whenever requested
for any internal or external candidates.
Protection Job Responsibilities:
Work experience in the Protection Department Handling Relay protection Testing & commissioning
activities. In which the earlier Having experience on upgrading, reinforcement & commissioning of
the various voltage level of Power Transmission lines protections, switchgears, Transformers, Bus bar

protection , and GIS switchgears ranging 11, 13.8, 33, 110, 115, 220, & 500kv. Worked on Auto
transfer schemes, (ABTS) particularly on 13.8kv. In addition having an excellent approach on
Reading Logics, diagrams, protections schemes, AVRS, & Digital panel meters of various types.
Having an experience in tele-metering (SCADA) system using Micro Processors based transducers&
converters.
Responsible of Functional testing to proving fast Tripping schemes belongs to Power lines
protections, including Local end, & end to end trip testing, As well as power transformers protection
ranging from (30 to 300MVA). Proving high impedance earth fault Protection operation such as
Restricted Earth Fault (REF) 67N/87T, as well as backup protection (50/51) schemes.
Special Skills:
Utilizing electronic background in design or modifying schemes and logics such as Auto re-closers
schemes, Breaker failure schemes and line protection relays schemes creating logics to avoid and
prevent false operation or failure of above mentioned schemes. Most Attractive skill is to prepare,
and conduct functional tests for newly commissioned power Lines or power Transformers, line
phasing test, On load Ground Directional test for ground directional relays, Stability tests for
Transformers (REF protection). Busbar protection & Line differential protection relays (87L)
communicating with remote terminal. Conduct on load in-service tests.
Dealing with Tariff control equipments to arrange and conduct accuracy of energy meters (KWH)
meters & under frequency relays (Load shedding relays) to insure accurate registration & operation
respectively.
Quality Control (QC)
· Supervised site QC activities as per Aramco Standards and IFC Drawings.
· Preparation of Request for Inspection (RFIs) for Material receiving Inspection, Installation
Inspection, Testing and Commissioning Inspection as per the SAIC, SATR and SATIP.
· Conducting Inspection with Aramco Inspector.
· Preparation of Loop Packages as per Aramco standard and test reports.
· Preparation of Energization packages as per Aramco standards and test reports
· Pro-Active to the respective disciplines Engineer to avoid the violation
· Continuous Monitor of site activities under QC requirements
· Preparation of Surveillance log to active the QC requirement and to avoid the violation &
NCRs
· Giving NCR to the Corresponding Departments
· Excellent Knowledge in Saudi Aramco Standards such SAMSS, SAES, SATIP, SATR, SAIC.
· Installation Inspection, Pre-Commissioning Inspection and Final Commissioning Inspection of
all Electrical Equipments.
· Preparation of Red line drawings as per the site condition.

·
VID Activities
· Inspection done with Manufacture Place as per approved IAP&ITP
· Conducted PIM Meeting for Level-2 and above materials
· Preparation of MOM & PIM reports
· Inspection done with respective SAMSS, SAES, and approved FAT procedure and 175 Forms.
· Materials are inspected as per the approved NMR-602 documents, GA drawings and required
SAMSS
· Logic test and Function test done with FAT documents
· Expectation Item list Creation and Clearance.
· FAT reports and document sign off
· Release the material after completion of all Expectation Item.
· Preparation and submission of Final Report
· Issue of NCR if any non complaint found during Inspection.
Professional Skills
· Protection Relay Software:
o AREVA Micom – S1 (P 20, 30, 40 series).
o ABB (REF542/REF542plus/RE*316 family/500 and 600 family)
o SIEMENS Siprotec family (DIGSI 4.6/4.7).
o Schneider (Sepam 2000/ Sepam 1000 (20 series, 40 series and 80 series)).
· Protection Test Equipments and Software:
o Programma from GE Energy SVERKER(650 & 750).
o OMICRON (CMC X56 family and CT Analyzer).
o ISA RTDS and TDMS software.
o MEGGER PCIT/S1/MIT.
· Application Software tools:
o Fault Recorder: BEN 6000, SAG.
o Electrical Analysis: IPSA, EMTP/ATP.
o General Analysis: Matlab, Visual Basic.
o General Applications: Microsoft Word/ Excel/PowerPoint.
· Wiring schemes (protection, annunciation and controlling).
· LV/HV insulation resistance measurement tester.
· Digital Earth Resistance Measurement Tester.
· DC Winding Resistance test (Ductor).
· Transformer Turns Ratio test (T.T.R).
· D.C, AC Hi-Potential .
· Excitation Current (Doble).

· TM-16 Timing Test Set.
· Digital Transformer Oil Tester.
· Phase Sequence Indicator.
· Micro Ohm Meter.
· Insulation Power Factor test (Doble).
· Station battery tests (capacity test etc.).
General Skills
· Good in Microsoft Office Applications.
· Good in Operating Systems Windows (XP, Vista, 7&8)
· Internet & E-mails.
· Very Good in both spoken and written English
· Good in planning and report writing skills
· Ability to work under pressure with minimal supervision.
· Good team player and leadership skills.
Declaration:
I hereby declare that all the above furnished details are correct to the best of my knowledge and belief.
Place: Saudi Arabia, Dammam Yours Truly
Date: October 30, 2016 Bahaeldin Siddiq Abdalhaleem
***

BAHAELDIN CV.

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (20)

En vedette

En vedette (6)

Similaire à BAHAELDIN CV.

Similaire à BAHAELDIN CV. (20)

BAHAELDIN CV.