wireline/slickline unit manufacturer

1. By .
WIRELINE UNIT
for Bottom Hole Surveillance

2. INTRODUCTION
P.T. Hazelindo Pratama was established on June 6, 2008 and formed as Specific Equipment
Manufacturer, especially in surface equipment in oil and gas industries. It is proudly known as the
nation’s native owned company.
Even The Company just started in 2008, the Founder has solid experiences in oil and gas industries as
field services engineer, and also as project leader for some surface equipment manufacturing in oil and
gas industry in Indonesia, Malaysia and Brunei Darussalam.
The Company as Specific Equipment Manufacturer have capabilities on Research and Development
activities, engineering design and been familiar with offshore equipment standard regulation such as
standard offshore container manufacturing and standard protection system for equipment in
hazardous area with potential flammable atmosphere. We have always performed our job strictly in
accordance to QHSE (Quality, Health, and Safety Environment) regulations.

4. DUAL WINCH WIRELINE SKID
WINCH UNIT SPECIFICATION
• Drum Capacity :
• Upper Drum : 25.000 feet of 0.108” wire
• Lower Drum : 25.000 feet of 0.125” wire
• Double Piston Caliper Disc Brake with Booster for upper and lower drum
• 4 Speed Heavy Duty Transmission Gear Box
• Operator Friendly Dashboard with Single Adjustable Hand Brake Control Handle
• Open Loop Hydraulic System Easy to Maintenance & Service
• Hydraulic Motor Torque : 115Lb.In/100Psi
• Max Hydraulic Pressure: 175 bar (2537 Psi)
• Compact Design with Forklift Pocket and Four Point Lifting Eye
• Flexible Top Cover, double function as operator canopy during operation and as
top cover during mobilization or standby
• Frame Dimension : L2000xW1100xH1500mm
• Maximum Gross Weight : 2000Kg
POWER PACK SPECIFICATION
Perkins 6 Cylinder Diesel Engine
Output 125 HP @ 2,500 Rpm
Spring Starter System with Over SpeedShut Down
OPTIONAL
Cabin Type Unit
Advanced Digital Speed Tension Unit (DSTU)
Build In Hydraulic Control Panel for BOP & DHSV
Hydraulic / Pneumatic / Electric Starter System

5. SINGLE WINCH WIRELINE SKID
POWER PACK SPECIFICATION
4 Cylinder Diesel Engine
Over Speed Shutdown System
Electric Starter System
Compact Design with Forklift Pocket and Four Point Lifting Eye
OPTIONAL
Cabin Type Unit
Advanced Digital Speed Tension Unit (DSTU)
Build In Hydraulic Control Panel for BOP & DHSV
Hydraulic / Pneumatic / Electric Starter System
WINCH UNIT SPECIFICATION
• Drum Capacity :
• 25.000 ft x 0.125” Wire
• Double Piston Caliper Disc Brake with Booster
• 4 Speed Heavy Duty Transmission Gear Box
• Operator Friendly Dashboard with Single Adjustable Hand Brake Control
Handle
• Open Loop Hydraulic System Easy to Maintenance & Services
• Compact Design with Forklift Pocket and Four Point Lifting Eye
• Flexible Top Cover, double function as operator canopy during operation
and as top cover during mobilization or standby

7. PRESSURE CONTROL EQUIPMENT
3. WIRELINE BLOW OUT PREVENTER
Manual wireline BOP is positioned on top of the wellhead It is designed to provide a positive seal
and contain well pressure around stationary wireline or braided cable during well intervention
operations. Manually operated stems are used to actuate rams into the bore of the valve and seal
around the wireline or braided line.
2. LUBRICATOR & RISER
Lubricator and Riser are design to contain well pressure and act as a manifold for tool deployment. When couple
together to the desired length, they form an effective operating height to accommodate the tool string and sub-surface
flow control being deployed into the well. Longer sections are referred to as riser sections as they are use on platforms
to “Rise” the working well containment manifold from the Christmas tree to the rig floor.
1. STUFING BOX
Stuffing box is an assembly used to form a seal against well pressure around stationery or moving solid wireline at the upper
end of lubricator during wireline operation. In the upper section of stuffing box there are packing nut and packing gland used
to increase the compression force. In hydraulic stuffing box, the packing is tightened against the wireline by means of
hydraulically operated packing nut, in manual stuffing box the packing is manually operated. The sheave wheel (3600 free
movement) with guards mounted at the top of stuffing box as the path for wire to enter the well through stuffing box and
lubricator.
4. TREE CAP FLANGE ADAPTER / TEE CONNECTION
Tree connection are designed to provide a transition between dissimilar connections and so allow the operator greater flexibility in
utilizing existing equipment. These components are always rated, in terms of pressure and service, with the lower rated
connection. Tree connection are designed with premium or API pin thread down by quick union box up.
5. HAY PULLEY
The hay pulley was designed to maneuver the the wireline from a upright position to horizontal position while in the
route of stuffing box to the wireline unit (14” dia Sheave Wheel for 0.092” -0.108”)
6. WIRE CLAMP
Chicago Wireline Clamp is designed to fix around wire/ cable in order to prevent movement. Bronze are lined throughout the
jaws preventing damage to the wire/cable when it
1
2
3
4
5

8. TEE CAP FLANGE ADAPTER / TEE CONNECTION
Tee connection are designed to provide a transition between dissimilar connections and so allow the operator greater
flexibility in utilizing existing equipment. These components are always rated, in terms of pressure and service, with the lower
rated connection. Tree connection are designed with premium or API pin thread down by quick union box up.
HAY PULLEY
The hay pulley was designed to maneuver the the wireline from a upright position to horizontal position while in
the route of stuffing box to the wireline unit (14” dia Sheave Wheel for 0.092” -0.108”)
WIRE CLAMP
Chicago Wireline Clamp is designed to fix around wire/ cable in order to prevent movement. Bronze are lined throughout the jaws
preventing damage to the wire/cable when it
WEIGHT INDICATOR
The Weight Indicator System is hydraulically operated and require no external power source. They are assembled and
fully charged with hydraulic fluid when fitted to the wireline reel unit. The indicator provides a dial face calibrated in lbs or
kilos and has dampener to smooth pointer sensitivity. The Load Cell transmits a hydraulic pressure signal through a
diaphragm sensing element held in place by the load cell housing. The standard hose length available is 60 ft.
WIRELINE SURFACE EQUIPMENT

9. ROPE SOCKET
Rope sockets are used as a means to connect wireline to the tool string.
Specification
Nominal Size Max OD F/N Connection Wire Size
1 1/2” 1.500’ 1.375” 15/16” 10 UN 0.092-0.108
1 7/8” 1.875” 1.750” 15/16” 10 UN 0.092-0.108
WIRELINE STEM
Wireline Stems are used to provide weight to tool string to eliminate friction with elastomers of stuffing box and for smooth running of wireline against well
pressure. Wireline stems are available in various lengths, ODs, and connections.
Nominal Size Max OD F/N Connection
1 1/2” 1.500” 1.375” 15/16” 10 UN
1 7/8” 1.875” 1.750” 1 1/16” 10 UN
MECHANICAL JAR
Mechanical Jars are designed to act like a sliding hammer, utilizing the weight of the stem bars located immediately above, to convey powerful jarring
impacts. Upwards and downward impact (jarring actions) are achieved by controlling the direction and speed of the wireline at surface Typically used in
conjunction with hydraulic jars. Link spang jar are available in various diameters and stroke lengths.
Specification Nominal Size Max OD Fishing Neck Connection
1 1/2” 1.500” 1.137” 15/16” 10 UN
1 7/8” 1.875” 1.750” 1 1/16” 10 UN
KNUCLE JOINT
Similar in design to knuckle joints, the knuckle jar incorporates a length extension of the socket that allows the ball to move vertically for light jarring.
Knuckle jars come with double fishing necks. Knuckle jar can be utilized to jar with short strokes to free the string, but limited to running such things as
static gradient tests or in deviated walls.
Nominal Size Max OD Fishing Neck Connection Stroke
1 1/2” 1.500” 1.375” 15/16” 10 UN 2”, 4”
1 7/8” 1.875” 1.750” 1 1/16” 10 UN 6”
WIRELINE STANDART TOOLSTRING
for Botom Hole Surveilance Operation

10. No CLIENT’S NAME YEAR PROJECT
1 PT. SLICKBAR INDONESIA
The World Leaders of Oil Spill Control
Technology since 1960
2009 Designing Rig Safe Multifunction Hydraulic PowerPack
with standard offshore skid frame
2009 Rig Safe Multifunction Hydraulic PowerPack with
standard offshore skid frame (1 unit)
2010 Designing & Fabricated 25Kw-rig safe hydraulic
powerpack unit (1 unit)
2010 Fabricate 50Kw-Rig safe Hydraulic Powerpack with
standard offshore frame (1 unit)
2010 Fabricate & Assembly Electric Control Panel for
hydraulic powerpack (1 unit)
2011 Fabricate 50Kw-Rig safe Hydraulic Powerpack with
standard offshore frame (1 unit)
2012 Fabricate 50Kw-Zone II Hydraulic Powerpack with
standard offshore frame (1 unit)
2 PT. United Tractors Pandu Engineering (PATRIA) Construction
Machinery and Mining Contracting
2010 Designing Composting Turner Tractor CT 1260
2011 Fabricate Prototype of Composting Turner tractor CT
1260 (1 unit)
3 PT. Welltec Oilfield Services Indonesia
Electronic Downhole Tools Specialist
2010 30Kva-Zone II Generator Unit
(1 unit)
2011 30Kva-Zone II Generator Unit
(1 unit)
CUSTOMER & PROJECT LIST

11. No CLIENT’S NAME YEAR PROJECT
4 PT. Marpolindo Pratama Nugraha
Marine Pollution Consultan and Manufacturers
Representative
2011 Fabricate 50Kw-Rig safe Hydraulic
Powerpack with standard offshore
frame (1 unit)
5 PT. Asrindo Citraseni Satria
Wireline Operator Company
2011 Single Drum Slickline Truck Unit
(1 unit)
6 PT. Dowtec Solusi Utama
Supplier for Oil & Gas industry
2011 Coil and Furnace Body (2 set)
7 PT. Welltekindo Nusantara, Schlumberger
Company
Slickline Services Company
2011 Refurbishment of slickline winch unit
(6 units)
8 ReservoirLink Malaysia Sd.Bhd
Oil & Gas Services Company
2011 40Feet Hydraulic Telescopic Boom
Wireline Mast & Zone II Hydraulic
PowerPack unit (1 set)
2015 120Hp Zone-II Hydraulic Power Pack
(1unit)
9 Aver Vera Eworks, Singapore
Supplier for Oil & Gas industry
2012 Exhaust Gas Manicooler Water Jacket
Zone-II for Perkins 1006
(1 unit)
CUSTOMER & PROJECT LIST

12. No CLIENT’S NAME YEAR PROJECT
10 PT. Elnusa tbk
Oil & Gas Services Company
2013 Double Drum Slickline Unit & Zone-II Hydraulic
PowerPack (1 set)
11 PT. Arkadia Nusantara Mandiri
Supplier for Oil & Gas industry
2012 Off-shore Gas Rack, Cap 8 and 16 Bottles, (20units)
2015 Off-shore Gas Rack, Capacity 16 Bottles, (10units)
2015 Off-shore Gas Rack, Capacity 16 Bottles, (5units)
2015 Off-shore Gas Rack, Capacity 16 Bottles, (5units)
2016 Off-shore Gas Rack, Capacity 16 Bottles, (5units)
2016 Off-shore Gas Rack, Capacity 16 Bottles, (5units)
12 PT. Bumi Bama Sentosa
Oil & Gas Services Company
2013 Single drum slickline unit & Rig safe Hydraulic
powerpack (1 set) c/w tool box & PCE Rack
2013 Double Drum Slickline Unit & Zone-II Hydraulic
PowerPack (1 set)
c/w Toolbox & PCE Rack
13 PT. Gunanusa Utama Fabricator
Engineering & Construction for Oil & Gas industry
2013 100Kva-Zone-II Generator Unit
(1 unit)
CUSTOMER & PROJECT LIST

13. No CLIENT’S NAME YEAR PROJECT
14 Rotorniaga Sdn.Bhd, Malaysia
Generator Specialist
2013 30Kva-Zone II Generator Unit
(4 units)
15 PT. Klaras Pusaka International
Oil & Gas Supply Company
2013 Built Mechanical & Electrical Instrument Control of
Engine-Compressor Unit for PT Kangean Energy
16 PT. Elnusa Fabrikasi Konstruksi
Subsidiary of PT Elnusa Tbk.
2015 120Hp Zone II Hydraulic PowerPack for Padestral crane
(1 unit)
2015 Double Drum Braidedline Unit & 150Hp Zone-II
Hydraulic PowerPack (1 sets)
2016 Double Drum Slickline Unit & 150Hp Zone-II Hydraulic
PowerPack (2 sets)
17 PT. Garuda Maintenance Facility Aero Asia 2017 Landing Gear Pallet B737NG
( 3 units)
18 PT. Navitas Powerindo 2017 20Kva Zone II Electric Generator
(1 unit)
CUSTOMER & PROJECT LIST

14. PT. HAZELINDO PRATAMA
Office : Jl. Penjernihan 1 No. 12 B, Jakarta Pusat , 021 5795 1342 ! Workshop Jl. Almujahidin no. 3 , Kel Setiadarma, Kec Tambun Selatan - Bekasi
B Budi Wicaksono
081227157888 / 081410109871
b.budi.wicaksono@hazelindopratama.com ; budiwicaksono2407@gmail.com
Require more information,
please do not hesitate to call.