THE NEED Equipment manufacturers and scientific researchers are continually challenged with supplying power, fiber-optic, control, and monitoring cables through sealed vacuum vessels. Whether due to space restrictions, special geometries, or number and type of conductors, standard glass-to-metal or ceramic feedthroughs never quite fit the bill. Unfortunately, because of limited options, many designers are forced to compromise and go for an off-the-shelf solution. EPOXY TO THE RESCUE. 
 During the past decade, new epoxy compounds have been developed that rival glass and ceramic in performance. BCE is at the forefront of this development. With modern epoxy feedthroughs, any kind of standard or custom connector is sealed in a completely potted, high-performance, clear epoxy compound. Epoxy seals offer countless design options, and most amazingly, performance equal to or better than glass or ceramic. Better yet, pricing is very competitive and quick turn-around for prototypes and short production runs are not a problem.

1. Custom shapes, angles and
conductors no problem.
Run wires (and shielding),
pneumatic tubing, or fiber-optic
cables.
Cost effective compared to glass
and ceramic.
Short runs and prototypes available
quickly.
Meets NASAspecs on outgassing.
Clear epoxy allows for visual
inspection.
Mounting directly to printed circuit
boards and flex-circuits.
Eliminates voltage drop or contact
resistance.
EPOXYVACUUM FEEDTHROUGHS
THE NEED
Equipment manufacturers and scientific
researchers are continually challenged with
supplying power, fiber-optic, control, and
monitoring cables through sealed vacuum
vessels. Whether due to space restrictions,
special geometries, or number and type of
conductors, standard glass-to-metal or ceramic
feedthroughs never quite fit the bill.
Unfortunately, because of limited options, many
designers are forced to compromise and go for
an off-the-shelf solution.
EPOXYTO THE RESCUE.
During the past decade, new epoxy compounds
have been developed that rival glass and
ceramic in performance. BCE is at the
forefront of this development.
With modern epoxy feedthroughs, any kind of
standard or custom connector is sealed in a
completely potted, high-performance, clear
epoxy compound. Epoxy seals offer countless
design options, and most amazingly,
performance equal to or better than glass or
ceramic. Better yet, pricing is very competitive
and quick turn-around for prototypes and short
production runs are not a problem.
FAST PROTOTYPES
BCE can provide custom
prototypes for your design with high
vacuum performance for today's
fast moving markets.
INTEGRATED PCB
PCB mounted vacuum
feedthroughs offer cost savings
through part count reduction vs.
standard feedthroughs, including
integrated PCB.
FEWER COMPONENTS,
INCREASED
RELIABILITY
Fewer components and
connectors, often reducing 5
components to 1, BCE epoxy
feedthroughs also eliminate
multiple potential failure points.
CERTIFIED LOW
OUTGASSING
BCE feedthroughs meet NASA
outgassing requirements. BCE
vacuum leak checks 100% of
feedthroughs.
CONTACT BCE TODAY
(510) 274-1990
WWW.BELILOVE.COM
TAKE ITALLTHROUGHTHE WALL!
BCE (Belilove Company-Engineers)
21060 Corsair Blvd
Hayward, CA94545
Phone: (510) 274-1990
www.belilove.com
E-mail: sales@belilove.com
PROTOTYPES INAS LITTLEAS ONE WEEK!