ORD 9 SNL G-740

INTRODUCTION
1. GENERAL. a. This supply manual is
an illustrated list of all service parts of the
M38 l/4 ton 4x4 utility truck arranged ac-cording
to standard government grouping.
NOTE: Many of the parts listed herein are not stocked
for issue. See ORD 7 and ORD 8 sections of this supply
manual, for listings of those parts stocked and author-ized
for issue to the various levels of maintenance. When
parts not listed in the ORD 8 are needed, separate req-uisitions
for these parts should be forwarded through
normal supply channels with justification therefor.
b. This list of all service parts is to be used
for identification and storage purposes. Every
individual part is not necessarily stored by it-self;
many parts are stored as authorized as-semblies.
Such assemblies are indicated herein.
The components of such assemblies are listed
alphabetically within the group, with the total
quantity of each part required for that particu-lar
application.
c. The Federal stock number column lists
the ll-digit Federal stock number (or the 7-
digit Federal item identification number) which
has been assigned by the Cataloging Division,
Office of the Assistant Secretary of Defense
(Supply and Logistics). These numbers are for
information only and will not. be used in con-nection
with supply operations, until such time
as implementation of the Federal-Cataloging
Program is accomplished through editing ac-tion
on appropriate supply documents (requisi-tions,
issue slips, excess lists, etc). However
where no Ordnance stock number is listed, the
Federal stock number will be used for requisi-tioning
purposes and must be suffixed with the
mission assignment code, e.g., (2910-735-1316-
G740).
d. Classification codes for Federal Standard
stock catalog numbers listed herein are pub-lished
in ORD 5-2.
e. For prices of items contained herein, see
the appropriate supply manual of the ORD 5-3
series.
f. Additional applications of items in this
manual are listed in the ORD 5-5 series.
g. An explanation of reference symbols
used in this manual is included under NOTES.
h. For full information relative to the Ord-nance
Section of the Department of the Army
Supply Manual, including the purposes and
2
uses, the procedure followed, and the principles
employed in its compilation, see ORD 1 and for
an index thereof see DA Pam 310-29.
2. MAJOR ITEM DESIGNATION. The
major item covered in this manual is desig-nated
as a general purpose vehicle as defined
in AR 700-105.
3. PUBLICATIONS PERTAINING TO
THIS VEHICLE. The following technical
manuals pertain to this vehicle and compo-nents
thereof:
TM 9-804 (TM g-8012), TM 9-1804A, TM 9-1804B,
TM g-8627, TM 9-1825B, TM 9-1826A, TM 9-8651,
TM 9-1827C, and TM 9-1828A.
4. INTERCHANGEABILITY OF COMPO-NENTS.
Several parts and accessories of the
M38 engine are interchangeable with corres-ponding
parts of the Willys Model MB. Several
parts of the electrical system are interchange-able
with other general purpose vehicles with
24-volt electrici systems.
5. SERIAL NUMBER LOCATIONS.
Serial numbers for this vehicle are located as
follows :
Complete vehicle :
10001 and up...... .Stamped on name plate
located on instrument
panel.
Engine 10001 and up.Stamped on water pump
boss located on top of
cylinder block, front end
of engine.
6. ILLUSTRATIONS. This supply man-ual
contains illustrations to aid the user in
locating and identifying parts. These are
placed before each group for convenient
reference in connection with the text for that
group. For each part identified on an illustra-tion,
the noun, part number, and group num-ber
of the item are given. The prefix to the
figure number indicates the group to which
it pertains, the suffix indicates the sequence
number within that group (e.g., figure 01-5
signifies illustration number 5 for group 01).
‘7. COMPONENTS OF ASSEMBLIES.
Whenever any doubt might exist as to what
items are included as components of assem-blies,
an explanatory note or a complete list-ing
of such components is shown.

8. ATTACHING PARTS. Attaching parts
such as bolts, nuts, rivets, washers, etc, are
indented immediately under the item which
they attach, Whenever two or more similar
items having the same attaching parts, such
as right and left fenders, are listed, they are
placed one immediately following the other
and the attaching parts for both are covered
by a single listing under the second item.
9. DEFINITION OF LOCATIONAL
TERMS. The flywheel end of the engine is
considered the rear and the fan end the front
of the engine. The right and left sides of the
engine are determined by standing at fly-wheel
and looking toward the fan. All other
components are designated left and right as
viewed from the rear of the vehicle facing
forward.
10. DESCRIPTION. All items are listed
with their complete nomenclature with the
exception noted in a. below.
a. Items appearing within a subgroup that
lists components of, and/or items related to
only one assembly or subassembly automati-cally
assume as part of their official nomen-clature
the title of the pertinent subgroup.
Example : “AXLE, float lever” is an entry
in subgroup 0301. The complete nomenclature
of the item is “AXLE, carburetor float lever”,
“CARBURETOR” being the subgroup title.
b. Items appearing within a subgroup that
lists more than one assembly or more than one
group of related items are listed with their
complete nomenclature. Example : “BRACKET,
muffler support clamp”, is an entry in sub-group
0401. The complete nomenclature of
the item is as shown, the title of the subgroup
being “MUFFLER AND EXHAUST PIPE”.
11. QUANTITY INCORPORATED IN
UNIT. The quantity incorporated in unit
column lists quantities for the following:
number of these parts required to attach the
item. These quantities do not indicate the total
quantities of the attaching parts required for
the major item or subgroup, since the attach-ing
parts may be used in more than one sub-group,
and may also be used more than once
within a subgroup.
12. HOW TO FIND PARTS. This sup-ply
manual is arranged and cross-indexed so
that parts can be found easily even though
only one of the several identifying factors is
known. The various ways in which parts can
be located are as follows:
a. If only the nomenclature (basic noun-name)
is known, refer to the alphabetical
index in the back of the manual. This index
will give the subgroup in which the part is
listed. As the part names are arranged in
alphabetical order within this subgroup, the
complete listing of the part can readily be
found.
b. If any one of the numbers - ordnance
stock, federal stock, manufacturer’s or ord-nance
part number-is known, refer to the
appropriate numerical index in the back of
the manual. These indexes will give the sub-group
number in which the part can be found
by following the procedure given in a. above.
c. If the shape, use, function, or Iocation
of the part is known, refer to illustrations in
which the part is likely to appear until a
picture of the part is found. The part will be
keyed to a listing of the name, part number,
and subgroup number, which will permit locat-ing
the complete listing of the part.
13. STOCK NUMBERS. The prefix letter
and number of the stock number (i.e., G501,
G503, G741, etc) usually signifies that the par-ticular
part or component was originally coded
under the major item designation for that
SNL and does not mean that the part is used
only in that major item. All subsequent
a. For vehicle parts which are not in- ply manuals for different items will include
dented, the quantity indicates the number of the same stock number for this same part.
those parts required for the particular use
14. STANDARD GOVERNMENT
indicated. These quantities do not indicate the
total quantities of the parts required for the
GROUPING. The parts listed in this manual
major item since the part may be used in
are arranged by groups and subgroups and
more than one subgroup.
alphabetically within these subgroups. Parts
are grouped primarily on the basis of their
b. For vehicle parts which are indented function rather than location. This arrange-
(attaching parts), the quantity indicates the ment facilitates identification and selection of
3

parts. Refer to paragraph 12, “HOW TO
FIND PARTS”.
01 -ENGINE
0100.1
0100.2
0101
0102.1
0102.2
0103
0104.1
0104.2
0105.1
0105.2
0105.3
0105.5
0106.1
0106.2
0106.5
0106.6
0108
OP-CLUTCH
0201
0202
Power Plant Assembly
Engine Assembly
Cylinder Block and Head
Crankshaft
Main Bearings
Flywheel
Pistons and Piston Rings
Connecting Rods and Bearings
Valves, Springs, and Guides
Valve Tappets
Camshaft
Camshaft Driver and Timing Gear
Cover
Oil Pump
Oil Filter
Crankcase Ventilation
Oil Lines, Level Gage, and Oil Pan
Manifold and Heat Control
Disk and Pressure Plate
Release and Controls
03-FUEL SYSTEM
0301 Carburetor
0302.1 Fuel and Vacuum Pump
0304.1 Air Cleaner
0304.5 Underwater Vent System
0306 Fuel Tank and Lines
0309 Fuel Filter
0311.1 Primer Pump
0311.3 Primer System - Lines and Fittings
0312 Accelerator, Hand Throttle, and Choke
Control
04-EXHAUST SYSTEM
0401 Muffler and Exhaust Pipe
05-COOLING SYSTEM
0501 Radiator
0502 Radiator Air Deflectors and Seals
0503 Water Lines and Thermostat
0504 Water Pump
0505 Fan Belt and Pulley
OB-ELECTRICAL SYSTEM
0601.1 Generator (24-Volt) ( Auto-Lite)
0601.3 Generator (24-Volt) ( Delcoy-Remy)
0602 Generator Regulator (24-Volt)
0603 Starter
0604.1 Distributor
0605 Ignition Coil, Wiring, and Spark Plugs
0607 Instrument Panel
0608 Miscellaneous Switches and Circuit
Breakers
0609.1 Head, Tail, Marker Lights and Lamp-
Units
0610 Sending Units
06-ELECTRICAL SYSTEM-Continlred
0611 Horn
0612 Batteries, Hangers, Boxes, and Cables
0613.1 Chassis Wiring
0615 Radio Suppression
0617 Trailer Couplings
07-TRANSMISSION
0700 Transmission Assembly
0701 Case
0702.1 Input Drive Gear, Bearing, and Cover
0702.3 Main Shaft, Gears, Bearings, and
Synchronizer
0702.5 Countershaft, Idler
Spacers
0704 Gear Shift Lever,
OI-TRANSFER
0800 Transfer Assembly
0801 Case and Covers
0802.1 Input Shaft
0802.3 Countershaft
Shaft, Gears, and
Shafts, and Forks
0802.5
0802.7
0804
Front Axle Output Shaft
Rear Axle Output Shaft
Shifter Shafts, Forks, and Gear Shift
Hand Levers
OO-PROPELLER SHAFT AND UNIVERSAL JOINTS
0900 Propeller Shaft and Universal Joints
IO-FRONT AXLE
1000 Front Axle Assembly
1001 Housing, Cover, and Plugs
1002 Differential
1004 Steering Knuckles
1005.5 Ventilation
1006 Front Axle Shaft and Universal Joints
11 -REAR AXLE
1100
1101
1102
1104.1
1105.5
Rear Axle Assembly
Housing and Cover
Differential
Rear Axle Shaft
Ventilation
12-BRAKES
1201
1202
1204.1
1204.3
1204.5
1206
Hand Brake
Service Brake Assembly
Master Cylinder
Wheel Cylinders
Lines and Fittings
Pedal and Connections
13-WHEELS, HUBS, AND DRUMS
1311 Wheels, Hubs, and Drums
1313 Tires and Tubes
14-CONTROLS
1401 Steering Controls
15-FRAME AND BRACKETS
1501 Frame Assembly and Brackets
1503 Pintle and Towing Attachments
1504 Spare Wheel Carrier

16-SPRINGS AND SHOCK ABSORBERS
1601.1 Front Springs
1601.3 Rear Springs
1604.1 Shock Absorbers
17-FENDERS AND HOOD
1701 Fenders
1703 Hood
18-BODY
1800 Body Assembly
1801 Body Mounting Parts
1803.1 Tailgate
1804.1 Body Panels, Pillars, Sills, and
Moulding
1804.2 Body Cowl
1804.3 Windshield, Ventilator, and Glass
1805 Body Floors and Seals
1806 Seats, Crash Pads, Trim, and
Upholstery
1808 Stowage Racks, Boxes, and Straps
LO-WINCH AND POWER-TAKE-OFF
2001.1 Winch Assembly and Drum
2001.3 Winch Drive Shaft
2001.5 Winch Controls
2002.1 Power-Take-Off Assembly
2002.5 Power-Take-Off Controls
21-BUMPERS
2101
AND GUARDS
Bumpers, Brackets, Guards, and
Protective Devices
PP-MISCELLANEOUS ACCESSORIES
2201 Canvas Items, Bows, and Curtains
2202 Mirrors, Reflectors, and Windshield
Wipers
2208.1 Speedometer
2210 Vehicular Data Plates
15. LIST OF ABBREVIATIONS. The
following is a list of abbreviations appearing
in this manual:
adj . . . . . .. . . . . .._._____.......................................a. djust, adjustable
al ___.._.._.._..._.___..................._._. ..... ._.._. __________._ _a_l u minum
alloy-S _.__.____.__________.....................................a..l.l..o.y.. ...s teel
amp _______......_______..................................................a..m...p...e re
amp-hr . . . . .._________..........................................a..m.. pere hour
anld ______.._._.....____.................................................a..n..n. ealed
aprx . ..____......_.____............................................a..p..p roximate
AS _______.____ ____._ .._____________....A..m...e..r.i.c..a.n.. ...S.. tandard
asb ______._..__..______................................................a..s..b..e..s tos
assy _._......_.._____.._...................................................a..s.s embly
AWG _____ __.._._._ ______ ___.___. _.______ _ ____. _A_ merican Wire Gage
b-hd ____._._.___________.................._.._.._..__.. _.._...._ ____b_u_t_ton head
blk-enmld ____.._______.___............................b..l.a..c..k.. enameled
blunt-pt __ ______ ___.___ __.__. __._______ __________ .._.._ .__ _ __.__b lunt point
br ____. _._________ ..___ ____ .___.__ _____ _.___._. _ _.... __..___.. . __._. _br ass
brg _______________ ____ _______________ ______.___________ _ _ ___ ______b_e a ring
bz ________ _____. ____________ __________.______ .._.. . _.____ _____ b.ro_n ze
cd-pltd ________._____ ___ __._____.. _._._______.._._ _c_a_d_m_i um plated
CI __ ______.__._._ ____ ____.__.. . __.__._. _____..__....._..._ _ .._.. . . . . .__ __c.a st iron
ck ......................................................c.o.u.n.t.e.r.s.u.n.k. .......
CP ......................................................c.a.n..d.l.e.p..o.w..e..r. ...
COP ............................................................c.o.p.p..e.r. .............
corr-res-S .................................... corrosion resistant steel
CUP-pt ....................................................c.u..p.-.p..o.i.n.t. .......
dble ................................................................................ double
dble-tun-fil .................................. double tungsten filament
deg .................................................................. degree (angle)
diam .......................................................................... diameter
dld-hd .................................................................. drilled head
ea ...................................................................................... each
elec ............................................................ electric, electrical
ext-teeth ................................ external teeth (lockwasher)
fil-hd .................................................................. fillister head
fin .................................................................. finish, finishing
fl-hd .......................................................................... flat head
ft .............................................................................. foot, feet
frt .................................................................................... front
ga ...................................................................................... gage
gimlet-pt ............................................................ gimlet point
glvd ........................................................................ galvanized
hd ...................................................................................... head
hdls ............................................................................ headless
header-pt .......................................................... header point
hex .......................................................................... hexagonal
hex-hd .............................................................. hexagon head
hex-lt .............................................................. hexagon light
hv .................................................................................... heavy
hyd ............................................................................ hydraulic
ID .......................................... inside diameter (dimension)
in. .......................................................................... inch, inches
incand ................................................................ incandescent
ins ...................................... insulated, insulating, insulator
instr ...................................................................... instrument
int-teeth ................................ internal teeth (lockwasher)
Id-&d .................................................................... lead coated
lg ........................................................................................ long
lgh .................................................................................. length
LH .........................................................................l.e. ft hand
lkg ................................................................................ locking
It ...................................................................... light (weight)
M .................................................................................... Model
math .......................................................................... machine
med ............................................................................ medium
MI .................................................................... malleable iron
MIL-STD ................................................ Military Standard
min .......................................................................... minimum
mm ........................................................................ millimeter
mtg .......................................................................... mounting
NC ...............................................N. ational Coarse Thread
NEF ...................................... National Extra Fine Thread
NF ..................................................N.. ational Fine Thread
ni-S ...................................................................... nickel steel
No. ...........................................................................n..u. mber
NPT _______ __ ________ _________N_a_t_i_o_n_a l Taper Pipe Thread
NPTF _________ ____ __ ._____ N ational Taper Pipe Thread Fine
NS _______ _ _______N_ ation al Form Thread, Special Pitch
OD ............................................................o.u. tside diameter
oval-hd .................................................................... oval-head
pan-hd ... ._... ........... .._.. ....... .._...__..._. .........................p an head
5

phos-ctd __ _________.. ____ ____ .__._ _.___ ____ _._.__. ___ p hosphate coated
pl ..................................................................................p.l.a..i n
pltd ............................................................................p..l.a. ted
psi .................................................. pounds per square inch
pt .................................................................................p..o..i.n t
rad .................................................................r.a..d ius, radial
rd ................................................................................r.o..u. nd
rd-hd .................................................................... round head
reg .............................................................................. regular
reqd ........................................................................r.e..q. uired
RH ......................................................................r.i.g..h t hand
ru .................................................................................. rubber
rvrs ......................................................................r.e..v.e rsible
GF
AC
ACD
AE
AHC
AL
AN
ANB
AOD
APB
S ........................................................................................ steel Ax
SAE .............................. Society of Automotive Engineers B&B
set ............................................................................s..e.c. tion
s-fin .................................................................s..e.m ifinished
sgle ................................................................................ single
sgle-cond .................................................... single conductor
sgle-hd .................................................................. single head
sgle-tun-fil .................................. single tungsten filament
sh-met-thds ........................................ sheet metal threads
sh-met ................................................................ sheet metal
sltd ............................................................................s.l.o..t ted
socket-hd ............................................................ socket-head
sp .................................................................................. special
spec .................................................................s..p. ecification
sq ..............................................................................s..q..u are
sq-drive .............................................................. square drive
sq-hd .................................................................... square head
sq-nk .................................................................. square neck
sq-nut .................................................................... square nut
sq-socket ........................................................s.q. uare socket
SR .......................................................................... single row
std .............................................................................. standard
stght .......................................................................... straight
stk ................................................................................s.t.o..c k
syn-ru ........................................................ synthetic rubber
T ...................................................................................... teeth
taper-pt .............................................................t.a..p er point
thd-( s) ._._______.___________ __.___ __ t hread, threaded, threads
thk ................................................................................t.h..i.c k
tnd ..............................................................................t.i.n..n ed
tn-fin __.______ ._____ ._________ __________ _________._ _ ___ti_n_n.e_d_ .fi_n ished
UNC ________.___ .__________ ______ _____U ni_te_d_ _ National Coarse
UNF ................................................U.. nited National Fine
untin ........................................................._ _._.._.._.._ u nfinished
US std __ ___.____ _________ ______ __________U__n__i_t_e__d States standard
v ..................................................................v.o.l.t. ....................
W/ ..............................................................w..i.t.h.. ................
w/o .........................................................w..i.t.h..o.u.t. ............
wtrprf ............................................................w.. aterproofed
x ................................ by (as in dimensions only, as 2 x 4)
zn ........................................................................................ zinc
zn-dizhromate ............................................ zinc dichromate
zn-pltd ............................... ________._.._.._.._.._.... ........ zinc plated
BX
CA
CAR
CAS
CC
CCL
ccs
CED
CM
CP
CHV
cu
DGM
DM
DN
DR
DV
EAT
EN
FS
GE
GKS
GL
GPC
HAC
HLH
HMP
HP
HY
IL
IM
KHW
LO
MAE
MAT
MDR
MRC
MSP
N&J
ND
NMP
16. LIST OF MANUFACTURERS’ SYM- OKS
BOLS. The following is a list of symbols pre- ONB
ceding the manufacturers’ part numbers in p
this manual : PC
Aetna Ball and Roller Bearing Mfg Co
Auburn Mfg Co
AC Spark Plug Div (General Motors Corp)
American Chain Co
(Div American Chain & Cable Co)
Appleton Electric Co
Anchor Coupling Co
Electric Auto-Lite Co, The
Ainsworth Mfg Corp
Anderson Brass Company
Air-Lot Mfg Co
Appliance Mfg Co
Aerovax Corp
Borg & Beck Div (Borg-Warner Corp)
Bendix Products Div (Bendix Aviation Corp)
Columbus Auto Parts Co, The
Carter Carburetor Corp
Cascade Rubber, Inc
Chrysler Corp
Corbin Cabinet Lock Co
Chicago Screw Co
Cannon Electric Development Co
Chicago Rawhide Mfg Co
Champion Spark Plug CO
Chace Co, W. M.
Cuno Engineering Carp
Detroit Gasket & Mfg CO
Douglas Mfg Co, H. A.
Donaldson Co, Inc
Delco-Remy Div (General Motors Carp)
Dole Valve Co, The
Eaton Mfg Co
Elastic Stop Nut Carp
Smith Mfg Co Inc, F. A.
General Electric CO
Great Lakes Supply Corp
Guide Lamp Co
Garlock Packing Co, The
Hall Lamp Co, C. M.
Holland Hitch Co
Hamilton Metal Products CO
Harris Product,s Co
Hyatt Bearings Div (General Motors Carp)
Industrial Lamp Corp
Illinois Iron & Bolt Co
Kelsey Hayes Wheel Co
Wagner Electric Corp
Monroe Auto Equipment Co
Mather Spring Co
McCord Corp
Marlin-Rockwell Corp
Midland Steel Products Co, The
North & Judd Mfg Co
New Departure Div (General Motors Corp)
National Machine Products Co
Oakes Products Div
( Houdaille-Hershey Corp)
Ohio Nut & Bolt Co
Picatinney Arsenal
Pa.ckard Electric Div (General Motors Corp)
6

Sunbol Manufacturer
PEE Presstite Engineering Co
PG Pierce Governor Co
RG Ross Gear & Tool Co
RMC Rich Mfg Co
RWM Ramsey Winch Co
SC1 Scintilla Magneto Div (Bendix Aviation Corp)
SDH Standard Thompson Corp
SEPC Sealed Power Corp
SF Sterling Siren Fire Alarm Co Inc, The
SHA Shakespeare Products Co
SMA Smith Corp, A. 0.
SP Dana Corp
SPR Sprague Electric Co
SPT Spencer Thermostat Co
SPW Sparks-Withington Co, The
SRM Soreng Mfg Corp
sz Schwitzer Cummins Co
TI Titeflex, Inc
TIM Timken Roller Bearing Co, The
TNP Tinnerman Products, Inc
TR Torrington Co, The
TRI Trico Products Corp
UC United Carr Fastener Corp
USL Auto-Lite Battery Corp
vc Van Cleaf Brothers
Symbol
VG
WB
WER
WG
WH
WIL
wo
ZP
Manufacture+
Victor Mfg & Gasket Co
Willard Storage Battery Co
Wagner Mfg Co, E. R.
Warner Gear Div (Borg-Warner Corp)
Weatherhead Co, The
Eaton Mfg Co
Willys-Overland Motors, Inc
Skinner Purifier Div (Bendix Aviation Corp)
1’7. SUGGESTIONS AND RECOMMEN-DATIONS.
Notice of discrepancies and rec-ommendations
should be forwarded through
command channels to the Chief of Ordnance,
Department of the Army, Washington 25, D.C.,
ATTENTION : ORDFM-Pub.
Hl SNL symbols such as Hl, H2, etc, refer
to the SNL in which the item is re-viewed.
$ As required.

Figure 1. Truck, x ton, 4 x &-left front view, top up

Part Group Kw Item
7368669 0604.1 -COVER ____________________..................
7741412 0101 : -VALVE _.._ ______ ___.__..____________________
7523174 0606 R -SPRING ________________.._.__________________
7624268 0606 S -SHIM ___.___.______ .______ __ _____._ _______._
7372666 0101 -RETAINER __________________ ____________
8328126 0106.1 U -PAN _______._____________________ ______ _
7372662 0108 V -PLUG ___________ _.______ ____.__._.________
7371393 0103 W -SUPPORT ____ _________ _______ ________ _
7371236 0105.1 X -CRANKSHAFT, ASSY _._._.____
7376064 0108 Y -STRAINER ________.___.___________ ________
7371286 0106.6 2 -ROD _____ __ _____________ _ ________ __
7372687 0106.1 AA -PIPE ____ __ __ _________ __ _____ ______...____
7376907 0106.1 BB -GAGE ______ ___ __________.____._ ___ __________
Key Item
A -DISTRIBUTOR, ASSY . .._______
B -GASKET ______________. __._..._.__________ _
C -CABLE ______._.___._.____......._.. ...........
D -PLUG . .._________..______......................
E -HEAD ___________._._.._._~__ ________._____ _____
F -GUIDE ___________._....___....................
G -MANIFOLD, ASSY _..______._.______
H -VALVE _...____________................_.......
J -SPRING _______._.__._..___......_.. .........
K -MANIFOLD, ASSY _________._._.____
L -BODY _______________.___.____________________..
M -GASKET_ ___________. _____ _____._...________
N -PUMP...... ___.__..____. __________ __.._..______
Part Group
7744332 0106.1
7371276 0106.1
3331246 0106.1
7371268 0106.1
7371271 0106.1
7371273 0106.6
7333074 0106.6
7371264 0106.6
7744473 0102.1
7036578 0106.6
7743762 0104.2
7376065 0106.6
7047960 0106.6
15

t
Figure. 01-7. Piston connecting rod-eqdodcd view

KEY ITEM PART NO GROUP
A-MANIFOLD
B-GASKET
C-MANIFOLD
D-STUD
WO-A659 0108
7371388 0108
7994936 0108
i 78453 j 0108
OdOi
E-BOLT 423542 ‘0108
F-STOP 7371395 0108
G-WASHER 7371398 0108
H-LEVER 7371392 0103
J-KEY 7371396 0108
K-SCREW 120910 0108
L-NUT 120361 0108
M-SPRING 7372563 0108
N-NUT 503354 0108
P-SHAFT 7371391 0108
’ RA PD 367420

ILLUSTRA-TION
NO.
01-l
01-5
01-5
ORDNANCE FEDERAL
STOCK NO. STOCK NO. MFR’S PART NO. DESCRIPTION
GROUP 01-ENGINE
G740-73’75026
G740-7372544 2805-737-2544
HOOl-5420481 012-2104
HOOl-7025741
G740-7372545
HOOl-0924218
G740-7372548
G740-8328043
HOOl-4167601 012-0369
HOOl-7025471 .5310-012-0382
G740-7372550 2805-737-2550
HOOl-5419841 01220213
HOOl-4167561 012-0368
HOOll4040581 050-3323
HOOl-7043711 5310-012-0393
HOOl-7025711 5310~012-0214
WO-802016 7375026
wo-802021 8673463
WOP806005
5310-012-0382
010-4097
WO-800809
WO-649857 r
7372544
122104
120382
7372545
104097
7372548
8328043
.I 120369
120382
7372550
120213
~. 120368
503323
120393
120214
0100.1 -POWER PLANT ASSEMBLY
HOOK, Iifting~ .._...~. ... ~..~. . . . . ._...... 1
POWER PLANT, assy (includes ENGINE, TRANS- 1
MISSION, CLUTCH, and TRANSFER) (superseded
by POWER PLANT WO-806005) (used through
engine serial No. 74419)
POWER PLANT, assy (includes ENGINE, TRANS- 1
MISSION, CLUTCH and TRANSFER) (supersedes
POWER PLANT 8673463) (used after engine serial
No. 74419)
0100.2-ENGINE ASSEMBLY
BRACKET, mounting, rear ~~~~~ . . . .~_~
BOLT, MACHINE, hex-hd, S, cd or zn-pltd, g-
16NC-3 x s
WASHER, LOCK, med, S, cd or zn-pltd, G in
BRACKET, stay cable, rear ~.~~ ~~~~. _...............
RIVET, SOLID, b-hd, S, 5/r6x K ~~~~.~..~ ~.
CABLE, stay, assy (between engine and transmission)
(used on engines through serial No. 74419)
CABLE, stay, assy (between engine and transmission)
(used on engines after serial No. 74419)
NUT, PLAIN, HEXAGON, light, s-fin, S, cd or zn-pltd,
g-24NFp2
WASHER, LOCK, med, S, cd or zn-pltd, W in med
CUSHION, front mounting support.
BOLT, MACHINE, cap, hex-hd, S, cd or zn-pltd,
%hiG-24NFp3 x B
NUT, PLAIN, HEXAGON, s-fin, S, cd or zn-pltd,
54&24NF-2
NUT, SELF-LOCKING, HEXAGON, S, cd or zn-pltd,
?+2ONF-3 (critical-installations)
WASHER, FLAT, light series, S, 36 in, cd or zn-pltd
WASHER, LOCK, S, :$, in, med, cd or zn-pltd ~...
1
4
2
2
2
4
4
2
4
4
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

0
0 (5) 6) (7) (3) (9)
0
=
01-1, 2,
3, 4
ORDNANCE FEDERAL
STOCK NO. STOCK NO. MFR’S PART NO.
OP;fA;;E
G740-7372551 2805-737-2551 WO-801053 7372551
HOOl-4167601 012-0369 ..~ ----- ~. 120369
HOOl-4040541 05063351 503351
HOOl-7043741 012-0394 120394
HOOl-7045591 5310-012-0388 120388
HOOl-7025741 5310-012-0382 120382
WO-802020 8673510
G740-8328044
WO 806004
WO-806007 8328044
DESCRIPTION
GROUP 01-ENGINE-Continued
0100.2-ENGINE ASSEMBLY-Continued
CUSHION, rear mounting support .~~ .._
NUT, PLAIN, HEXAGON, It, s-fin, S, cd or zn-pltd,
g-24NF-2
NUT, SELF-LOCKING, HEXAGON, s-24NF-3
(critical installations)
WASHER, FLAT, light series, S, g in, cd or zn-pltd
WASHER, FLAT, S, cd or zn-finish, ‘4 ID, 1 OD
WASHER, LOCK, W in med, S, cd or zn-pltd. .._
ENGINE, w/ACCESSORIES, assy (same as ENGINE,
G74067375025 w/o CLUTCH and flywheel HOUSING)
(superseded by ENGINE, WO-806004)
ENGINE, w/ACCESSORIES, assy (same as ENGINE,
G740-8328044 w/o CLUTCH and flywheel HOUS-ING)
(supersedes ENGINE, 8673510)
ENGINE,w/ACCESSORIES,assy(supersedesENGINE,
G740-7375025) (used after engine serial No. 74419)
(includes fuel PUMP, CARBURETOR, DISTRIBU-TOR,
spark PLUGS, oil PUMP, oil FILTER, water
PUMP, THERMOSTAT, FAN, fan BELT, CLUTCH,
flywheel HOUSING, GENERATOR, and STARTER)
G740-7375025 WO-802023 7375025 ENGINE, w/ACCESSORIES, assy (superseded by
‘ENGINE, G’74068328044) (used through engine serial
No. 74419) (includes fuel PUMP, CARBURETOR,
DISTRIBUTOR, spark PLUGS, oil PUMP, oil
FILTER, water PUMP, THERMOSTAT, FAN, fan
BELT, CLUTCH, flywheel HOUSING, GENERA-TOR,
and STARTER)
I I I I I OlOl-CYLINDER BLOCK AND HEAD
G503p7412658 WO-641087 7412658
WOP804380
WO-802025
1
2
2
1
BLOCK, cylinder (less CAPS) (used on engines through
serial No. 74419)
ea
ea
ea
ea
ea
ea
ea
1 ea
BLOCK, cylinder (less CAPS) (used on engines after
serial No. 74419)
1 ea
BLOCK, cylinder, assy (short) (includes all internal 1 1 ea I I

wo-800100 8673497
O-5 ..__ _____.. ... . . . . . . . . . . . .. -------.--- --~----w o-804937
WO-641066
t
8673475
WO-804936
H6 H106-0103647 .~ ...~~ ~~..~_. _...
O-4 .~ G503-7741412 77441412 WO-638540
O-3, 4 ~_~G ’740-7372556 . WO-800376
G503-5333811 WO-638539
G503-7371137 .._.. ~. WO-349368
103647
7741412
7372556
5333811
7371137
G716-7348512 .._..._.. ~. WO-802548 7348512
G503-73’71138 ._... WO-A1548 7371138
H6 H006-0282480 541402
7324919
117243
Y I I I I
H6 H006-0283755 ..~_W O-376373
H6 H106-0117243 011-7243
H6 H106-0125947 012-5947 ~... ~.
H6 H106-0143980 014-3980
G75888329675 .~ WO-805472
Hl HlOl-0103151 ..__ WO-635886
G716-8673476 ..~ WO-646316
01-3, 4, 6 ..______._G_5.03 -7744473 .._.. WO-647078
01-3, 5 . .._....... G740-7372558 WO-649722
01-5 Hl HOOl-0518022 012-4549
01-3, 5 . . . . . . . . . . G50337697864 .._...... ~_ WO-638513
2 01-5 .._ G740-7375028 .._....... ~. WO-647468
h)
L
125947
143980
8329675
103151
8673476
7744473
7372558
124549
7697864
7375028
BLOCK, cylinder, w/BEARINGS, assy (used on engines
through serial No. 74419)
BLOCK, cylinder, w/BEARINGS, assy (used on engines
after serial No. 74419)
BLOCK, cylinder, w/bearing CAPS, assy (used on engines
BLOCK, cylinder, w/bearing CAPS, assy (used on engines
COCK, drain, tee-handle, br, % in, male pipe end (type C).
GASKET, cylinder head .._..........._
HEAD, cylinder. .._
NUT, hex, S, zn-pltd, TAG-20NF-4. ..__ .._....
STUD, S, 74&14NC x 7?&20NF-2 x 37d6 (used on
engines through serial No. 10169 and after serial No.
22765)
STUD, S, 7$&14NC x r&20NF-2 x 3% (used on
engines after serial No. 10169 and through serial No.
22765)
STUD, S, cd or zn-pltd, &14NC (pg) x ‘A-20NF
(13%) x 3%
PLUG, expansion, S, 1% in diam (used on engines through
serial No. 17140 (5); and after engine serial No. 17140
(2))
PLUG, PIPE, ck, MI, W in ._ _ .~.. ..__......
PLUG, PIPE, S, cd or zn-fin, hd, s-27NPT, RH thread
(superseded by PLUG, G758-8329675) (for rear inter
brg only)
PLUG, PIPE, S, cd or zn-fin, slotted, headless, J&
27NPT, RH thread
PLUG, PIPE, S, cd or zn-fin, square head, G-18NPT,
RH thread
PLUG, spec, pipe, drilled-sq-hd, S, x in (supersedes
PLUG, H10660117243) (rear inter brg only)
STUD, S, x-20NC (g) x %-28NF-2 (g/2) x l................
0102.1 -CRANKSHAFT I
CRANKSHAFT, w/COUNTERWEIGHTS .._ .._.._..._
CRANKSHAFT, w/flywheel BOLT, NUT, and
WASHER, assy
PULLEY, drive, fan and generator (double “V”)..~ .._.....
KEY, WOODRUFF, alloy-S, 3/(6x % (No. 606 or 9) .._
NUT, hex, S, 1x6 .._......... _..........._
SEAL, oil, front ._._...................._.....~ ._. . . . . ..__.........................
1
1
1
1
1
1
1
1
15
12
12
3
5
2
3
1
1
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

o,-
w (1) (2) (3) (4) (5)
L
l+/~~T;;. REFER-
:TRoDcNKANNco:
FEDERAL
. ENCE STOCK NO. MFR’S PART NO.
SYMBOLS
01-6 .___________G..5..0 3-7371226 .__........................ WO-630262
01-5, 6 ._._____.......G. 503-7371161 ._.. wo-375877
01-6 G503-7371160 . .._....... WO-634796
01-6
%
O-6
(01-6
G740-7372560
G503-7371376
G740-7372559 . WO-649849
G’740-‘7372565
G740-7372568
G740-7372571
G740-7372574
G740-7372564
G740-7372567
G740-7372570
G740-7372573
G740-7372566
G740-7372569
G740-7372572
G74067372 575
G503-7371493
2805-354-3789
2805-737-2568
2805-495-9607
2805-495-9610
12805-737-2567
2805-354-3790
2805-737-2569
2805-495-9608
2805-495-9611
VG-49650
wo-800093
WO-A1124
WO-645161 7372565
WO-645164 7372568
WO-645167 7372571
WO-645170 7372574
WO-645160 7372 564
WO-645163 7372567
WO-645166 7372570
WO-645169 7372573
WO-645162 7372566
WO-645165 7372569
WO-645168 7372572
WO-645171 7372575
WO-A6798 7371493
I I G503-7521218 WO-A6746
I I
I (6)
ORDNANCE
PART NO.
-I 7372560 SEAL, oil, rear (upper and lower). .......................................
7371376
7371226
7371161
7372559
7371160
7372564
7372565
7372566
7521218
7372567
7372568
7372569
SHIELD, pulley (see PAN 7371278 in subgroup 0106.6
for attaching parts)
SHIM, adjusting, 0.002 thk.. ........... ........ . ................. .............
SLINGER, oil.. .........................................................................
SPACER, fan pulley shield.. ................................ ...... ..........
WASHER, thrust, S, 1.251 ID, 334 OD, 0.153 thk~ ........ ~_
I
0102.2-MAIN BEARINGS
BEARING STD, 2 halves, center, assy.. ..................... . ........
BEARING 0.010 U/S, 2 halves, center, assy.. ......................
BEARING 0.020 U/S, 2 halves, center, assy.. ... . ..................
BEARING 0.030 U/S, 2 halves, center, assy. ......................
BEARING STD, 2 halves, front, assy ................................
BEARING 0.010 U/S, 2 halves, front, assy.. ....................~ _
BEARING 0.020 U/S, 2 halves, front, assy.. ........................
BEARING 0.030 U/S, 2 halves front, assy.. ........................
BEARING STD, 2 halves, rear, assy ....................................
BEARING 0.010 U/S, 2 halves, rear, assy.. .........................
BEARING 0.020 U/S, 2 halves, rear, assy.. .........................
BEARING 0.030 U/S, 2 halves, rear, assy.. ........ ~_~.... ...........
BEARING SET, STANDARD.. .......... ................................
Composed of:
1 BEARING
1 BEARING
1 BEARING
BEARING SET, 0.010 UNDERSIZES ................................
Composed of:
1 BEARING
_ 1 BEARING
1 BEARING
(7)
DESCRIPTION
(6) (6)
Q&';;;TY
UNIT
PORATED
IN UNIT lS%E
0102.1 -CRANKSHAFT-Continued
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
ea
ea
I ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

01-6
01-5
01-5
Hl
Hl
Hl
Hl
Hl
Hl
G503-‘73’71503 737-1503 WO-A6747 7371503
G503-7371504 ~_.....______.._..._W..C...-A...6 748
G503-7371227
HOOl-7025801
G503-73’71281
G503-7371229
012-0384
WO-630288
WO-630285
WOP637236
WO-381519
WOP637790
WOP635377
G503-7371191 b .._.......................
G503-7371368 _..........._ ..____.........~ ~..~..~.
G503-7371232 ~. WO-116295
G503-7371341 2520-495-9554 WO-630103
HlOll9409106 ._.......................... ~_ __ _..~... .
G740-8328310 ~...~...~ WC-804417
HlOl~9409106 . . . . . . . . . . . . . . .._......................... . .._.............
G503-7371501 .._.. _ .._ ..~_ WC-375217
HlOl-0172427 5305-01772427 .._......
HOOll7025681 012-0380
WO-A1441
WO-804314
737’2570
7372571
7372572
7371504
7372573
7372574
7372575
7371227
120384
7371281
7371229
7371191
7371368
7371232
7371341
9409106
8328310
9409106
7371501
172427
.._ 120380
8677008
BEARING SET, 0.020 UNDERSIZE ~.~
Composed of:
1 BEARING
1 BEARING
1 BEARING
BEARING SET, 0.030 UNDERSIZE . . . . . . . .
Composed of:
1 BEARING
1 BEARING
1 BEARING
CAP, bearing, center ..~.~_ ...... . .._ .._...............................
CAP, bearing, front... ~~~.~
CAP, bearing, rear ~~.~.~ ~ ..~ ..~~.~~~~...~..
SCREW, cap, hex-hd, J+13NC2 x W in...~ ..~~~~_ .........
WASHER, LOCK, M medium, steel, cd or zn-pltd ~..
PACKING, rear bearing cap ~.
PIN, dowel, bearing .~. _......~ .~~...~~.~ ...~~..~.~. __
I 0103-FLYWHEEL
BEARING, bushing type, starter (listed in subgroup
0603)
BEARING, pilot, clutch (listed in subgorup 0201) ~.
BOLT, dowel, &20NF-2 x 1xdG ~~~.~..~~..~
COVER, inspection, clutch linkage (housing) (super-seded
by COVER, G740-8328310) (used on engines
BOLT, MACHINE, hex-hd, w/spring lockwasher, S,
cd or zn-pltd, $&ZONC-Z x W
COVER, inspection, clutch linkage (housing) (super-sedes
COVER, G50337371341) (used on engines
BOLT, MACHINE, hex-hd, w/spring lockwasher, S,
cd or zn-pltd, &20NC-2 x W
COVER, timing hole (on housing) (used on engines
SCREW, TAPPING, THREAD CUTTING, hex-hd,
S, cd or zn-fin, $&20NC-2 x z
WASHER, lock, med, S, cd or zn-pltd, >i in . . . . .
FLYWHEEL ..~ .~. ~~.. ~..
FLYWHEEL, assy (used on engines after serial NO.
1
1
1
2
2
1
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
6 ea
ea
ea
ea
ea

ILLUSTRA-TION
NO.
01-3
01-6
01-6
g
01-5
01-5
01-5
01-1, 5
01-5
01-5
Hl
Hl
. .
.
. .
Hl
(2)
REFER-ENCE
YMBOLS
(
I
._ I
1
,
,
,
. ,
. ,
,
,
,
/
(3)
ORDNANCE
STOCK NO.
3716-8328019
2503-7371232
:503-7324840
HOOl-4167601
G503-7371231
HOOl-7017681
G740-8328045
G740-7372582
G740-8328048
G740-8328313
G740-8328049
G740-8328046
G740-7372583
G740-8328312
0740-8328311
HlOl-0120640
(4)
FEDERAL
STOCK NO.
312-0369
5310-013-8489
312-0640
(5)
MFR’S PART NO.
WO-641960
WO-802924
8677016
WO-641959 8328019
WO-116295
WO-632157
7371232
7324840
120369
WO-632156 7371231
138489
wo-805454 8328045
WO-643562 7372582
wo-804377 8328048
WO-804418 8328313
wo- 804379 8328049
wo-802925 8328046
W&641955 7372583
WO-804812 8328312
WO-804367 8328311
120640
1
(7)
DESCRIPTION
0103-FLYWHEEL-Continued
FLYWHEEL, assy (used on engines through serial No.
74419)
FLYWHEEL, w/ring GEAR, assy (used on engines after
serial No. 74419)
FLYWHEEL, w/ring GEAR, assy (used on engines
BOLT, dowel, ?&20NF-m2 x l:;d;
BOLT, hex-hd, S, $?&24NFm2 x 1;:;
NUT, PLAIN, HEX, It, s-fin, S, cd or zn-pltd, p$-
24NF-2
PIN, dowel, tapered, engine flywheel to crankshaft
WASHER, LOCK, S, cd or zn-fin, style No. 1, 0.670
OD, y;; in bolt size
FLYWHEEL, w/ring GEAR and dowel BOLT, 2%~
FLYWHEEL, w/ring GEAR and dowel BOLT, assy
(used on engines through serial No. 74419)
GASKET, bell housing to rear engine plate (used on
engines after serial No. 74419)
GASKET, clutch linkage inspection cover (cork, 0.090
thk) (used on engines after serial No. 74419)
GASKET, cylinder block to rear engine plate (used on
GEAR, ring, flywheel (used on engines after serial No.
74419)
GEAR, ring, flywheel (used on engines through serial No.
74419)
HOUSING, flywheel, assy (used on engines after serial
No. 74419)
BOLT, dowel, +24NF-3 x 3yi/8’
BOLT, MACHINE, cap, hex-hd, S, cd or zn-pltd, $&
24NF-3 x 2 3’2
UANTIT
INCOR-ORATED
IN UNIT
1
1
1
2
6
6
2
6
1
1
1
1
1
1
1
1
2
4
(9)
“ET
ISSUE
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

01-5 II -il ’H lOll0124128 012-4128
!I1
31
I1
!I1
I1
!I1
31
-1 124128 BOLT, MACHINE, cap, hex-hd, S, cd or zn-pltd, g-
HOOl-4167601 )12-0369 120369
HOOl-7025741
HOOll’7043741
112-0382
)1220394
120382
120394
WO-804306 .
WO-801628 8673461
G740-7348511 WOP801629 7348511
G50337371700
HOOll5421281
WO-630101
112-3534
.~.
7371700
123534
HlOl-0123825 11223825 123825
HOOll4167601 )12-0369 120369
w 01-3, 5
HOOl-7025741
G740m8328047
)12-0382
WO-807889
120382
8328047
6174007375029 3805-737-5029 WO-801595 7375029
01-5 31 HOOl-5419841 )12-0213 120213
01-5 (3758-8332679 8332679
H6 H006-0282440 501593
G758-8328483 WO-805767 8328483
G758-8328484 WO-805768 832 8484
WO-808000
20-5 Hl HlOl-0103260 103260
S
z:
24NFm-3 x 3
NUT, PLAIN, HEXAGON, It, reg, S, cd or zn-pltd,
gm24NFm2
WASHER, LOCK, med, S, cd or zn-pltd, g in..
WASHER, PLAIN, It series, S, vs in, cd or zn-pltd,
‘$6 ID, l:,[b OD, 0.065 thk
HOUSING, flywheel (used on engines after serial No.
74419)
HOUSING, flywheel (used on engines through serial No.
74419)
HOUSING, flywheel, w/starter BEARING, assy (used on
engines through serial No. 74419)
BOLT, hex-hd, S, g-24NF-2 x 2%
g-24NFm3 x 1 W
g-24NF-3 x 1 g
NUT, PLAIN, HEX, It, s-fin, S, cd or zn-pltd, W-
24NF-2
WASHER, LOCK, med, S, cd or zn-pltd, $$ in ..~...~...
PLATE, engine, rear, w/tapping BLOCKS (welded)
(used on engines after serial No. 74419) (supersedes
PLATE, G740m7375029)
PLATE, engine, rear (superseded by PLATE, G740-
8328047) (used on engines through serial No. 74419)
BOLT, MACHINE, cap, hex-hd, S, cd or zn-pltd, ?h-
24NFp3 x x
WASHER, FINISHING, plain, cop, 0.31 ID, 0.44 OD,
0.09 thk
PLUG, expansion, S, x in diam (flywheel housing)
(used on engines through serial NO. 74419)
REINFORCEMENT, engine plate, rear, left (used on
REINFORCEMENT, engine plate, rear, right (used on
SEAL, S, rear engine plate (for service only) (used
w,/HOUSING, G740-7348511 through engine serial
No. 74419)
STUD, S, Q/j&12NC (X/s)x Qdcm18NF-2 (Xi) x 2 15 (plugging,
flywheel housing) (used to attach HANGER, G740-
7411681 when winch is used) (used on vehicles after
serial No. 74419)
2
8
8
8
1
1
1
2
3
2
7
7
1
1
6
6
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

0
S (1)
ILLUSTRA-TION
NO.
01-5
01-7
w 01-7
)c1
REFER-ENCE
SYMBOLS
ORDNANCE FEDERAL
ORDNANCE
PART NO.
G740-8328125 ~..~~~...~~ WO-804289 8328125
Hl HOOl-5419141 012-2007 ..~. ----- 122007
Hl HlOl-0172427 5305-017-2427 172427
143481
G503-7324840
HOOl-7025741 01220382
WO-632157
SEPC-WAJZ91
MNCR1788C
WO-116108
SEPCWAJ292
WO-116613
PR-031E12A
MNC-R5712
WO-806146
SEPC-WAJ294
MNC-R1787D
WO-116109
SEPC-WAJ304
wo-801492
G503-7371144 WO-636961
G503-7371145 WO-116003
DESCRIPTION
UNIT
IS%
SUPPORT, rear, cylinder block to rear engine plate (used
on engines after serial No. 74419)
BOLT, MACHINE, cap, hex-hd, S, cd or zn-pltd, 5ds~- 2 ea
18NC3 x 3$ I I
SCREW, TAPPING, THREAD CUTTING, hex-hd,
fluted-taper-pt, S, cd or zn-pltd, %-20NC-2 x >i;
TEE, flared tube, inverted, br, K in tube, :+?e in tube,
54 in male pipe side (flywheei housing)
4 1 ea
1 ea
0104.1 -PISTONS AND PISTON RINGS
BOLT, hex-hd, S, g-24NF-2 x 15.6 (locking, piston pin)
WASHER, LOCK, med, S, cd or zn-pltd, 36 in
EXPANDER, piston compression ring (intermediate)
(for normal and extreme oil consumption, std and 0.020
oversize ring) (superseded by RING PR-BlOGlC)
EXPANDER, piston compression ring (top) (for normal
and extreme oil consumption, 0.030 and 0.040 oversize
ring) (superseded by RING, PR-B1062C and RING,
PR-24929)
EXPANDER, piston oil regulating ring (bottom) (for
normal and extreme oil consumption)
4
4
4
4
4
j
ea
ea
ea
ea
EXPANDER, piston oil regulating ring (bottom) (for
normal and extreme oil consumption, std ring)
4 ea
EXPANDER, piston oil regulating ring (bottom) (for 4 ea
normal and extreme oil consumption, 0.020, 0.030, and
0.040 oversize ring)
PIN, piston... ~~... ..~~ ~.~. .._ 4 ea
Standard. ~.. ..___.... t ea
0.003 oversize

2i
01-7
9
X
-4
G’740-7372873 ........... . . ..............
G740-7372374 .... .. ........ . ..........
G740-7372875 .......... . . . ..............
G740-7372876 ...........................
WO-801476
WO-801538
WO-801539
WO-801540
WO-801371
WO-801534
WO-801535
WO-801536
WO-809021
PR-031E12A
PR-X4071A
WOP809022
PR-031E12A
PR-X4072A
WO-809023
PR-031E12A
PR-X4073A
SEPC-WAJ247
wo-116616
SEPC-WAJ247C
wo-116116
SEPC-WAJ247D
WO-116117
SEPC-WAJ247E
WO-116705
SEPC-WAJ293
MNC-R5153B
WO-801480
MNC-R5153B
wo-119022
MNC-R5153B
wo-119023
MNCpR5153B
WO-119024
PISTON, w/PIN, assy~. . .____..__________. _________ ....._.......................
7372873 Standard
7372874 0.020 oversize ._...........______......................................................
7372875 0.030 oversize ~.~~.. . . . . . . . . . . . . . . .._...........................................
7372876 0.040 oversize _................................................. ._...................
PISTON, w/o PIN ,_____._ . . . . . .._............................... . . .. .._
Standard
0.020 oversize.._ . . . . . . . . . . . . .
~~. 0.030 oversize..~.~.~~. ~_._~ ~.~ . _
0.040 oversize ~~~ . . . . . . . . . . . _...~. .~.~.. ..~. . . . . . . .. . . . . . . ._
RING, oil regulating, piston (0.020 oversize) w/EX-PANDER,
assy (bottom) (normal oil consumption)
Composed of:
1 EXPANDER
1 RING
RING, oil regulating, piston (0.030 oversize) w/EX-PANDER,
Composed of:
1 EXPANDER
1 RING
.~.... RING, oil regulating, piston (0.040 oversize) w/EX-PANDER,
Composed of:
.~. 1 EXPANDER
~~~ 1 RING
RING, piston, bottom groove,~. ..~ ..___._..._.........
__...................... Standard
0.040 oversize ~~~~.. . . ..___
RING, piston, bottom groove (for extreme oil consump-tion)
,
Standard
.~. 0.030 oversize ..~ . .
t
0.040 oversize ..________.
I
4
4
4
4
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
1 ea
/ ea

Y
01-7
(4) (5)
FEDERAL
STOCK NO. MFR’S PART NO.
SEPC-WAJ293
MNC-R5153B
STD
wo-801480
SEPC-WAJ298
wo-636148
SEPC-WAJ298C
WO-115796
PR-X4071A
WO-809025
SEPC-WAJ298D
wo-115797
PR-X4072A
WO-809026
SEPC-WAJ298E
wo-115798
PR-X4073A
WO-809027
SEPC-WAJ211
WO-637042
SEPC-WAJZllC
WO-116023
SEPC-WARllD
WO-116024
SEPC-WAJZllE
WO-116704
SEPC-WAJ297
WO-116058
SEPC-WAJ297C
wo-116060
PR-BlOGlC
WO-808797
DESCRIPTION
I I I I
0104.1 --PISTONS AND PISTON RINGS-Continued
RING, piston, bottom groove . .~ ~~.~._~.~_ ....... 4
Standard (supersedes RING, SEPC-WAJ298)
__..__..____...._.. ... Standard (superseded by RING, SEPC-WAJ293)
0.020 oversize (superseded by RING, PR-X4071A) .._...
__. 0.020 oversize (supersedes RING, SEPC-WAJ298C).
.~. 0.030 oversize (superseded by RING, PR-X4072A) .~~.~
__.._.............._...0. .030 oversize (supersedes RING, SEPC-WAJ298D)
0.040 oversize (superseded by RING, PR-X4073A)... ~~~.
0.040 oversize (supersedes RING, SEPC_WAJ298E)... ._
RING, piston, compression, second groove ,___________________-------
Standard
_ .. . __ _ 0.020 oversize _..............~ . .._......... . .._..............................
__. 0.030 oversize_ .............. ._..._....._.. . . . . . ._______.............................
0.040 oversize . . . .._... .. . ._...__..._._....._.._..... _____....__.................
RING, piston, compression, second groove ,__________................
8677029 Standard
0.020 oversize (superseded by RING, PR-B106lC) . . . . .
. . . 0.020 oversize (supersedes RING, SEPC-WAJ297C
and EXPANDER, 8677030)
4
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

01-7 ,____.__._____._..____...__.._..._.........
G503-7371146
G780-7418113
SEPC-WAJ297D
wo-116061
PR-B1062C
WO-80879b
SEPC-WAJ297E
WO-116708
PR-24929
WO-808799
..___.........__.___.......S. EPC-WAJ239
WO-639864
SEPC-WAJ239C
WO-116502
PR-2532A
WO-808793
SEPC-WAJ239D
WO-116503
PR-B2533A
WO-808794
SEPC-WAJ239E
WO-116703
PR-B2534A
WO-808795
. . . . .._....._..._........... SEPC-863
WO-A6794
WO-639864
WO-637042
wo-116616
_ SEPC-535
WO-801500
wo-116108
WO-116109
WO-639864
WO-116058
WO-801480
wo-801494
SEPC-535
WO-116110
wo-116108
WO-116109
WO-639864
WO-116058
WO-636148
__ _____.__.._.______.0....0 30 oversize (superseded by RING, PR-B1062C) . . . .
___ 0.030 ovemize (supersedes RING, SEPC-WAJ297D
and EXPANDER, SEPC-WAJ292)
.__ 0.040 oversize (superseded by RING, PR-24929) ..__.__._
8677512 0.040 oversize (supersedes RING, SEPC-WAJ297E
and EXPANDER, SEPC-WAJ292)
RING, piston, compression top groove,.. ._ .._._ ___......._..___....__
. . . . . . . . Standard
_..__._____.__.._.._....0 .020 oversize (superseded by RING, PR-B2532A) . . . . .
__.._.___.._______.....0. .020 oversize (supersedes RING, SEPC-WAJ239C)
__.._......._....___.... 0.030 oversize (superseded by RING, PR-2533A)
__ ..__..___._.._....0_.0_3_0_ oversize (supersedes RING, SEPC-WAJ239D) .
__ ______ ......_.. .._ 0.040 oversize (superseded by RING, PR-B2534A)
__ _________.__..0_.0..4.0_ ..o.v ersize (supersedes RING, SEPC-WAJ239E) .
7371146 RING SET, piston, standard (conventional type) __._.......
Composed of:
4 RING
__ __.________...4 ..R._I.N..G
_..._..._..._......_.... 4 RING
(for service, use RING SET, 8393084)
7418113 RING SET, piston, standard (extreme oil consumption).
Composed of:
.._ 4 EXPANDER
___ 4 EXPANDER
____.._...._.___.___....4 RING
__.._._.....__.......... 4 RING
. . . 4 RING
.._ 8 SEGMENT
(supersedes RING SET, 8393084)
8393084 RING SET, piston, standard (normal oil consumption).
Composed of:
_....___....._...._..4.. . EXPANDER
.__ 4 EXPANDER
_._ 4 RING
_...__._..........._.... 4 RING
.._ 4 RING
(superseded by RING SET, G780-7418113)
$
1
1
1
ea
ea
ea
ea
ea

IEFER-ENCE
‘MBOLZ
ORDNANCE
STOCK NO.
;503-7330714
;‘780-‘7418111
:780-7418114
(4)
FEDERAL
STOCK NO.
(5)
MFR’S PART NO.
RO-A6796
NO-116502
iVO-116023
WO-116116
;EPC-535C
WO-116112
wo-116108
WO-801492
WO-116502
wo-116060
WO-115796
PR-68-4+.020
WO-809047
PR-B2532A
WO-808793
PR-B1061C
WO-808797
WO-809021
SEPC-535XB
WO-801502
wo-116108
WO-801492
WO-116502
wo-116060
WO-801480
WO-801495
(6)
ORDNANCE
PART NO.
7330714
7418111
7418114
1
(7)
DESCRIPTION
0104.1 -PISTONS AND PISTON RINGS-Continued
RING SET, piston, 0.020 oversize (conventional type)..~.
Composed of:
4 RING
4 RING
4 RING
(for service use RING SET, G780-7418111)
RING SET, piston, 0.020 oversize (normal oil con-sumption)
Composed of:
4 EXPANDER
4 EXPANDER
4 RING
4 RING
4 RING
(superseded by RING SET, PR-68-41-k .020)
RING SET, piston, 0.020 oversize (normal oil con.
sumption)
Composed of:
4 RING
4 RING
4 RING, w/EXPANDER
(supersedes RING SET, G780-7418111)
RING SET, piston, 0.020 oversize (extreme oil con
sumption)
Composed of:
4 EXPANDER
4 EXPANDER
4 RING
4 RING
4 RING
8 SEGMENT
Q:
PC
If
.
(9)
‘ET
iSUE
ea
ea
ea
ea

;503-7371147
:503-7329277
WO-A6797
WO-116503
WO-116024
WO-116117
SEPC-535XC
wo-801503
WO-116613
wo-801492
WO-116503
wo-116061
wo-801480
wo-801495
SEPC-535D
WO-116113
WO-116613
WO-801492
WO-116503
wo-116061
wo-115797
PR-684+ .030
WO-809048
PR-B2533A
WO-808794
PR-B1062C
WO-808798
WO-809022
WO-A15283
WO-116’703
WO-116704
WO-116705
737 .147
8677058
7329277
RING SET, piston, 0.030 oversize (conventional type)....
Composed of:
4 RING
4 RING
4 RING
(for service use RING SET, SEPC-535D)
RING SET, piston, 0.030 oversize (extreme oil con-sumption)
Composed of:
4 EXPANDER
4 EXPANDER
4 RING
4 RING
4 RING
8 SEGMENT
Composed of:
4 EXPANDER
4 EXPANDER
4 RING
4 RING
4 RING
(superseded by RING SET, PR-68-4-j-.030)
Composed of:
4 RING
4 RING
4 RING w/EXPANDER
(supersedes RING SET, SEPC-535D)
RING SET, piston, 0.040 oversize (conventional type).....
Composed of:
4 RING
4 RING
4 RING
(for service use RING SET, SEPC-535E)
ea
ea
ea
ea
ea

IEFER-ENCE
‘MBOL:
(3)
ORDNANCE
STOCK NO.
;780-7418115
;780-7418112
(4)
FEDERAL
STOCK NO.
I
(5)
MFR’S PAHT NO.
SEPC-535XD
wo-801504
WO-116613
wo-801492
WO-116703
WO-116708
wo-801480
WO-801496
SEPC-535E
WO-116706
WO-116613
WO-801492
WO-116703
WO-116708
WO-115798
PR-68-4 + .040
wo-809049
PR-24928
WO-808795
PR-24929
WO-808799
PR-72A367
wo-809023
SEPC-WAJ295
wo-801494
SEPC-WAJ295B
wo-801495
SEPC-WAJ295D
WO-801496
1418112
lING SET, piston, 0.040 oversize (extreme oil
s
sumption)
Composed of:
4 EXPANDER
4 EXPANDER
4 RING
4 RING
4 RING
8 SEGMENT
UNG SET, piston, 0.040 oversize (normal oil
sumption)
Composed of:
4 EXPANDER
4 EXPANDER
4 RING
4 RING
4 RING
(superseded by RING SET, PR-68-4+.040)
RING SET, piston, 0.040 oversize (normal oil
sumption)
Composed of:
4 RING
4 RING
4 RING w/EXPANDER
(supersedes RING SET, G780-7418112)
SEGMENT, piston oil control ring (extreme oil
sumption, std)
hS EGMENT, piston oil control ring (extreme oil
sumption, 0.020 and 0.030 oversize)
SEGMENT, piston oil control ring
sumption, 0.040 oversize ring)
(for extreme oil
(7)
DESCRIPTION
I104.1-PISTONS AND PISTON RINGS-Continued
con-
QI
PI
II I
con-con-con.
con
con-
(6)
JANTIT’
NCOR-JRATEO
N UNIT
1
I
I
U
IS 1
1
8
8
8
(9)
INIT
OF
iSUE
ea
ea
ea
ea
ea
ea

I 1 0104.2-CONNECTING RODS AND BEARINGS 1
BEARING SET, connecting rod, std _..__........... _._....._..
Composed of:
8 BEARING
BEARING SET, connecting rod, 0.010 undersize
Composed of:
8 BEARING
Composed of:
8 BEARING
Composed of:
8 BEARING
BOLT, g-24NF-2 x 2% (connecting rod cap)
NUT, hex, S, s-24NF-2
NUT, jam, stamped, hex, It, r-notch, S, cd or zn-pltd,
sA-24NF
ROD, connecting (for No. 1 and 3 cylinders) .._._....
ROD, connecting (for No. 2 and 4 cylinders) _......
ROD, connecting, w/BEARING and CAPS (for No. 1
and 3 cylinders)
ROD, connecting, w/BEARING and CAPS assy (for No.
2 and 4 cylinders)
ROD, connecting w/o BEARING, assy (for No. 1 and 3
cylinders)
ROD, connecting, w/o BEARING, assy (for No. 2 and 4
cylinders)
‘01-7 G740-8330745 _..___..__.............w...o.-.8..0 7941 8330745
G740-8330746
WO-639862
._ _.............. WO-807944
G740-5330747
G740-8330748
WO-116534
wo-807947
WO-116535
WO-807948
G503-7744471
.._ G503-7744472
Hl HOOl-4057591
WO-116536
774-4471 WO-641768
774-4472 WO-641769
..____ _.~ __._..._...........
WO-641770
WO-641771
_____......... WO-641772
WO-641773
. . G503~7743751 _.~.... WO-641774
G503-7743752 WO-641775
ea
8330746 1 ea
8330747 1 ea
8330748 ea
101-7
101-7
‘01-7
8
8
8
7744471
7744472
107823
ea
ea
ea
8673393 2 ea
2
2
ea
01-3 8677015 ea
s:
2 ea
01-7 2 ea
014
7743751
7743752 2
0105.1 -VALVES, SPRINGS, AND GUIDES
01-8 7375032 CAP, rotation, exhaust valve .~_ __................ ..~
01-12
01-12
01-12
01-12
01-12
01-12
G740-7375032
G503-7371237
G503-7741420
G503-7741421
HOOl-7043711
G503-0194022
1 G503-0194032
EAT-K292
WO-800827
WO-630303
WO-645093
WO-645094
4 ea
7371237 COVER, valve spring . . . . . . . . . . . . .._......
ea
7741420
SCREW, cap, hex-hd, S, 5&18NC-2 x 31r$k.,_ _._ ~.
7741421
SCREW, cap, hex-hd, S, %&18NC-2 x 29/r,
120393
WASHER, FLAT, light series, S, 5/( in, cd or zn-pltd..
GASKET, cork (valve spring cover)~ ~~_
GASKET, cop, j/(6 ID, % OD, 34s thk (valve spring cover
screw)
ea
ea
ea
ea
Hl 2
1
2
WO-630305
DGM-5201
WG-X1552
wo-51875
wo-375811
ea
7520738 GUIDE, exhaust valve stem (superseded by GUIDE, 4 ea
G503-8328126)
G503-7520738

0 s (1)
‘L
ILLUSTAA-TION
NO.
--
(2) (3)
XFER-ENCE
fMBOLS
-
(4)
ORDNANCE FEDERAL
STOCK NO. STOCK NO.
01-4 G’740-8328126
G503-7520739
01-3
01-8 G740-7375033
01-8
01-S
01-8
e Ol-3,4, 8
01-3, 8
01-3, 8
G503-7371238
G503-7371236
G740-7375034
. . .
. . . .
G503-7371235
G740-7375035
G503-7036579
01-3, 8 G503-7371258
01-S
01-3
__. . .. .
G740-7372585
. .
. .
. .
.
/
.
5340-263-4539
G503-7743569 774-3569
vo-119137
1
7
VVO-637045
7
iVO-119136
EAT-K630
WO-800826
wo-375994
WO-63’7044
EAT-R-697
._ 1
1
WO-638636
EAT-5286
RMC-A-365
WIL-P-407A
,
(5)
MFR’S PART NO.
WO-800828
WO-800829
WO-637182
FM-GPW6549B
WO-640020
CCS-65C-634
WO-647071
WIL-MT9281
WO-647072
wo-115948
$328126
1520739
7375033 8
7371238
7371236
7375034
01-8 G503-7744319 774-4319 WO-645595 7744319
01-3, 8
01-8
G503-7741418 774-1418 WO-641284 7741418 CAMSHAFT ..__..............__........................................................
G503-7744320 774-4320 WO-644963 7744320 PLATE, thrust (optional w/PLATE, G740-7351413)......
8
4
4
7371235
7375035
8
4
7036579
GUIDE, intake valve stem (supersedes GUIDE, G503-
7520739)
LOCK, valve spring retainer (exhaust) . _.........
LOCK, valve spring retainer, lower (intake)) . . . . . . . . . . . . . . .._.
RETAINER, intake valve spring, lower. . .._......... ~..
RETAINER, valve spring (exhaust) ._......__._....
SPRING, HELICAL, COMPRESSION ~~. _........._.........
VALVE, exhaust.. ~_ ..~~
VALVE, intake.. .._..........._.. _........._...................................... 4
7371258
0105.2-VALVE TAPPETS
SCREW, adjusting, self-locking, valve tappet .._..._..........._. 8
8677296 TAPPET, valve (optional w/TAPPET, G740-7372585).. 8
7372585
7743569
TAPPET, valve (optional w/TAPPET, 8677296)
TAPPET, valve, 0.004 oversize .._ _.~~.. _......__.... .... .....
0105.3-CAMSHAFT
8
8
BEARING, PLAIN, SLEEVE, bushing type, 0.188 ID
(front)
DESCRIPTION
0105.1-VALVES, SPRINGS, AND GUIDES
-Continued
GUIDE, exhaust valve stem (supersedes GUIDE, G503-
7520738)
SUIDE, intake valve stem (superseded by GUIDE,
WO-119136)
Q
P
I
4
4
4
(9)
UNIT
S%E
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

IDl-8
01-5
01-5
101-5
01-5
f 01-5
101-5
01-5
101-6, 8
01-s
01-8
01-8
01-8
101-6
01-5
(Dl-5
101-5
IDl-6
0 101-8
g
h
G’740-7351413 . . . . . . ....................... WO-802576 7351413
Hl HOOl-5420521 012-2119 ................................ _.. .. . .. 122119
Hl HOOl-7017.681 5310-013-8489 ........ . .. . . . . . . _. ...... . .............. 138489
H6
I
H006-0282510
. . . . . . . . . . G503-7741407
_..._....__.... G740-7372576
Hl HOOl-5421221
Hl HOOl-5421261
Hl HOOl-4167601
Hl HOOl-1312560
Hl HlOl-0113247
Hl HOOl-7025741
_.._... G503-7741427
____..._____G__5_0 3-7371159
.._... G503-7741415
_..._._____ ____ G503-7741419
Hl HOOl-5421941
Hl HOOl-7017711
Hl HOOl-0518022
Hl HlOl-0124552
. ..___. G740-7372578
HI HOOl-5420521
Hl HOOl-7017681
G740-7372579
. . . . . . G503-7’741414
. ..__._ G503-7741406
I I
. .._ 541410
774-1407 WO-641049 7741407
WO-643834 7372576
012-3520 ____............_. ..___.~_. ..~...~~1 23520
012-0647 . . . 120647
012-0369 __........___.._ ..__ 120369
103197
.~_.. 113247
012-0382
774-1427
774-1415
2805-774-1419
012-2260
WO-641096
WO-630365
WO-641282
WO-641283
120382
7741427
7371159
7741415
7741419
, 122260
5310-013-6857 _...... . .._.. .._._._..._....1.3. 6857
012-4549 __....................... . . 124549
012-4552 . . . . ..__......_._._._......... 124552
_..___. WO-649823 7372578
012-2119 . . . . . . . . . . .._........................ 122119
5310-013-8489 . . 138489
wo-375917 7372579
774-1414 WO-641281 7741414
774-1406 WO-642520 7741406
PLATE, thrust (optional w/PLATE, G503-7744320) ..___
BOLT, MACHINE, cap, hex-hd, S, cd zn-pltd, W-
16NC-3 x x
WASHER, LOCK, steel, cd or zn-fin, style No. 1, 0.670
OD, W in bolt size
PLUG, expansion, S, 1 K in diam, type 2~ ._................._____..
SPACER, thrust plate. _~_. ........_.. ..~
0105.5-CAMSHAFT DRIVE AND
TIMING GEAR COVER
COVER, timing gear ~.~_.~~...~~..~. ..~.
BOLT, MACHINE, hex-hd, S, cd or zn-pltd, g-24NF-
3x%
BOLT, MACHINE, cap, hex-hd, S, cd or zn-pltd, s-
24NF-3 x 1
NUT, PLAIN, HEXAGON, It, s-fin, S, cd or zn-pltd,
s-24NF-2
STUD, S, plain-fin, g-16NC-2 x s-24NF-2 x l’s/16
(superseded by STUD, HlOl-0113247)
STUD, S, cd or zn-pltd, s-16NC (g/16) x s-24NF-2
(s) x 1%~ (supersedes STUD, 103197)
WASHER, LOCK, med, S, cd or zn-pltd, g in __._._.......
GASKET, front plate to cylinder block.. . ..___._.__........
GASKET, timing gear cover. . . . .._..............
GEAR, drive, camshaft (28 teeth) ..~_ _......___..__..._.................
GEAR, driven, camshaft (56 t.eeth). ..__. _____.__._......_...
BOLT, MACHINE, hex-hd, 1020 steel, cd or zn-pltd,
7/(6-14NC-3 x 1%
WASHER, LOCK, S, cd or zn-fin, style No. 1, 0.740
OD, 746 in bolt size
KEY, Woodruff, alloy-S, sdG x x (No. 606 or 9) (cam-shaft
driven gear)
KEY, Woodruff, alloy-S, 3/( x 1 (No. 608 or 13) (camshaft
dri,ve gear)
PLATE, engine mounting, front ~~. ~~. ~ .. . .. ._
BOLT, MACHINE, cap, hex-hd, S, cd or zn-pltd, W-
16NC-3 x K
WASHER, LOCK, steel, cd or zn-fin, style No. 1, 0.670
OD, g in bolt size
RING, retaining, timing gear cover packing
SPACER, camshaft drive gear. .~~~ ~.~.. ~~. ~~.
WASHER, flat, l?dz ID x l-1/20 OD x 542 thk (cam-shaft
driven gear)
I
1
2
2
3
10
6 ea
6
10
1
1
1
1
1
1
1
1
3
3
1
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

0
a (1)
1
ILLUSTRA-TION
NO. DESCRIPTION
01-9
01-4, 9
01-9
01-9
R
01-4, 9
01-9
01-9
01-9
01-9
01-1, 4, 9
..............
.............
..............
Hl
Hl
Hl
4
0106.1 -OIL PUMP
G503-7744331 774-4331 WIL-ER90139-3-4 7744331 BEARING, bushing type (shaft) (used w/PUMP, G740-
WO-645629 7375072)
WIL-ER24’71 ..~ _...__ BODY, w/BEARING, assy (Al) (used w/PUMP, G740-
WO-801761 7375072)
EAT-ER3592 .~. .~. . BODY, w/o BEARING (used w/PUMP, G740-7375072)..
WO-649872
EAT-ER367; BODY, w/o BEARING (used w/PUMP, G740-7376907)..
WO-804486
G503-7744332 ..~ .~~~..~ EAT-ER5362 7744332 COVER, body ~~..~ _............ . . . . . ._......._.......................
WO-641479
. .._............ . EAT-9036% 8673955 SCREW, lock washer, cap, hex-hd, S, x-20NC-2 x s._
WC-641740
G503-7744324 774-4324 EAT-ER8145 7744324 GASKET, cover ~. .._.......... __............~ ._ .....~. . .._._..._...
WO-641482
G740-7372587 _...... ..~ WO-646147 7372587 GASKET, pump to cylinder block .._....... .._ ._...
G744-5340173 .._.. .~~M DR-507 5340173 GASKET, relief plunger spring retainer .._.._. _.......__.._...____
WO-634813
G503-7744333 2805-774-4333 EAT-ER90358 7744333 GEAR, driven (12 teeth) .._..._........_.__................. ..____ _.._...__..
WO-641047
G503-7371279 5315-213-8995 EAT-ER90359 7371279 PIN, stght, headless, S, $$ x 31dZ (superseded by PIN,
WO-330964 HlOl-0141138)
HlOl-0141138 . . . . .~..~.~ _. ..~ ._~ 141138 PIN, stght, headless, S, xZ x ?A2 (supersedes PIN,
G503-7371279)
EAT-ER90419il/iG _...... ~..~ ._._.. .._. PIN, drive, 0.1875 x 114s (inner rotor to shaft) (for service
WO-642214 use ROTOR, 8673956)
G740-7375072 ._ ..~ EAT-ER10164 7375072 PUMP, oil, complete, assy (AL-body) (superseded by
WC-649871 PUMP, G740-7376907) (used on engines through serial
No. 86993)
G740-7376907 ~.. EAT-ER10317 7376907 PUMP, oil, complete, assy (CI-body) (supersedes PUMP,
WC-804484 G740-7375072) (used on engines after serial No.
86993)
HlOl-9409118 _. ~.. .~.... ~...~ .~.~ 9409118 BOLT, MACHINE, hex-hd, w/ext-lockwasher, S, cd
or zn-pltd, 5+18NC-2 x 254
~...... 431938 SCREW, lock washer, hex-hd, S, cd or zn-pltd, 5%
18NC-3 x 1
1
2
1
ea
ea
I ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

01-4, 9
01-9
01-9
01-9
01-4
Ol-4,9
01-4, 9
e 01-11
7416478
7371271
_________ _____G_5, 03-7371271 ______ _..__.. . _____ _____ ._W_I. L-ER7154
WO-630390
. . . . . . . . . . . . . _ . . . . . . . . , . . _ . . . . . . . . . EAT-ER4642J
WO-641484
_.....................______..........L. . . . .. . . . . .. ._...............E AT-ER2413 8673956
WO-641742
_ . . . . . . . . . . . . . . . . . . . . . . , . . EAT-ER4425J 8673952
WO-641483
EAT-ER6303
WO-641480
_____. ..__.... G503-7371268 __......_._.._______.......W... O-630389 7371268
G740-7372586 . . . . . . . . ..__..___............. WIL-ER7196 7372586
WO-645628
__.___._____G__7_5.8 -8331246 _...__.______._._..........E...A T-ER7397 8331246
WO-808385
___ .... G503-7371275 __ ........___.___.__E...A..T..-.E..R 7200 7371275
WO-630518
.._._ FR-5310-2 . _ ~.
WO-A15441
WO-A3150
G740-7375062 2940-737-5062 WO-802156 7375062
I IG 740-7369880 ..____..____ ___ _______.W_..O -648438
I
7369880
G740-7372590 5310-737-2590 7372590
01-10 ._............
5310-737-2591
5310-736-9879
G740-7369881 2940-736-9881
TNP-C1108A-5610
-4
WO-800319
WO-800320
WO-667694
CU-28717
WO-802496
7372591
7369879
7369881
01-10 Hl HOOl-4029501
Hl HOOl-5128671
01-10 Hl HOOl-5128691
5310-012-0372 ,..._____...___.__. ._......_....._1 120372
5305-013-2277
132273
. .._. 1 132277
CU-28751U
WO-120640
WASHER, rectangular, 0.406 diam hole, 0.660 ID,
0.940 OD, 0.0598 thk (used only w/PUMP, G740-
7375072) (used on vehicles after serial No. 43949)
RETAINER, relief plunger spring . . ..__..........___.....................
ROTOR, inner (for service use ROTOR, 8673956). . . . 1
ROTOR, oil pump, assy (includes SHAFT) (for service
only)
ROTOR, outer (for service use ROTOR, 8673956).
SHAFT (for service use ROTOR, 8673956) . . . . .._____......
I
SHIM, relief plunger spring ..~~ . . . . . . . .
SPRING, relief plunger (superseded by SPRING, G758-
8331246)
SPRING, relief plunger (supersedes SPRING, G740-
7372586)
VALVE, relief .._ .._....._. . ~.._. .................
0106.2-OIL FILTER
BODY, oil filter (used w/FILTER, H016-0540501) __..
BOLT, welding, S, cd-pltd or tnd, q&24NF x x (support
bracket)
BRACKET, mounting (cylinder head) (used w/FILTER
G740-7375060)
BOLT, ASSEMBLED WASHER, hex-hd, S, cd or zn-pltd,
5/a-1O x s, Acme thread
NUT, speed, “J” type for %&-lo (Acme bolt) (thin).._
NUT, speed “J” type for s+&lO (acme bolt) (thick)..
WASHER, flat, rl$$ ID, 19/(6 OD, thk.. _.................
BRACKET, mounting (oil filter to mounting bracket on
cylinder head) (for service use BRACKET, CU-
28751U) (used on vehicles through serial No. 28132)
NUT, PLAIN, SQUARE, reg, unfin, S, cd or zn-pltd,
x-20NC-2
SCREW, math, fil-hd, S, cd or zn-pltd, x-20NC-2 x 1
(superseded by SCREW, 132277)
SCREW, MACH, fil-hd, S, cd or zn-pltd, x-20NC-2
1% (supersedes SCREW, 132273)
BRACKET, mounting, assy (oil filter to mounting brackel
on cylinder head) (use for service only)
1
ea
ea
ea
1
1
I ea
ea
ea
ea
1
2
1
ea
ea
ea
ea
ea
ea
ea
ea
1 ea
ea
ea
ea

%
01-11
01-11
01-11
01-10
01-1, 2, 1
01-11
01-11
01-11
1
(2)
RiE
YMBOL!
I1
I1
11
Xl
Hl
Hl
. . . . . . .
II16
. . . .
H16
!I1
Kl
Hl
ORDNANCE
STOCK NO.
;758-8328422
X101-0271187
3001-5419821
2758-8330271
HOOl-5419841
HlOl-9409098
HlOl-0271187
G509-7529093
G507-6245928
H016-0540462
G740-7375060
H016-0540501
HOOl-4139781
HOOl-5150831
HlOl-0116120
FEDERAL
STOCK NO.
112-0741
112-0213
2940-752-9093
2540-360-7962
312-0399
5305-013-3129
5310-011-6120
(5)
MFA’S PART NO.
.
.
WO-805815
WO-802087
FR-102153
WO-119987
FR-11559
WO-119986
FR-5241
WO-A15438
FR-C21P2
FR-7631
FR-11582
CU-12567
WO-801933
FR-5664
WO-A1230
FR-12384
FR-12420
FR-10113
3328422
271187
120741
8330271
120213
9409098
271187
431938
7529093
6245928
540462
7039934
7375060
540501
120399
133129
116120
(7)
DESCRIPTION
0106.2-OIL FILTER-Continued
SRACKET, mounting, oil filter cylinder head (used on
vehicles through serial No. 28132)
NUT, hex, It, ext-teeth lockwasher, S, cd or zn-pltd,
5dG-24NF-2B
SCREW, cap, hex-hd, S, cd or zn-pltd, YG-24NF-3 x %
3RACKET, support, oil filter, assy (used on vehicles after
serial No. 28132)
BOLT, MACH, cap, hex-hd, S, cd or zn-pltd, 5%&
24NF-3 x x
BOLT, MACH, lock washer, hex-hd, S, cd or zn-pltd
5&-18NC-2 x x (superseded by SCREW, 431938:
NUT, hex, w/ext-teeth lock washer, S, cd or zn-pltd
5/(6-24NF-2B
SCREW, INTEGRAL, LOCK WASHER, hex-hd, S
cd or zn-pltd, 54&18NC-3 x 1 (supersedes BOLT
HlOl-9409098)
CLAMP, engine oil filter body (used w/FILTER, H016-
0540501)
COVER, oil filter (used w/FILTER, H016-0540501).....
COVER, w/SCREW, WASHER, locking SPRING am
GASKET, assy (used w/FILTER, H016-0540501)
ELEMENT, assy . . . . . . . . . . . . . . ..~.. .. .._._........... _._ ___........
Composed of:
1 ELEMENT
1 GASKET
(used for service for FILTER, H016-0540501)
FILTER, oil, assy (superseded by FILTER, H016-
0540501) (used on vehicles through serial No. 28132
FILTER, oil, assy (supersedes FILTER, G740-7375060
(used on vehicles after serial No. 28132)
NUT, PLAIN, SQUARE, math screw, S, cd or zn-pltd
s/(6-18NC-2 (cover attaching)
SCREW, MACH, rd-hd, S, cd or zn-pltd, ?&-18NC-2 ?
2%
WASHER, LOCK, med, S, phos-ctd, 5/16i n .._____.______.._._
“ET
SSUE
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

01-11
01-11 t :::1:111111-1
01-10 _.............
01-11 _..._............
G509-5308281
G749-7039934
G740-'7375059
5330-530-8281 FR-11581
WO-119982
5308281
__.___F. R-11582
wo-119953
CU-28649
WO-118291
7039934
7375059
. . .._._.___.....__......... FR-100918
G518-7000997 ~.~.. .._..__~__ ..~... WO-800802 7000997
O-10 G740-7375058 .~~~ . . ..~ CU-12567-2 7375058
WO-115288
01-10 . . . . . . . . . . .._...... .._..._. CU-F762 . _
WO-118293
O-10 .._.~ CU-F761
WO-118292
H6 H006-0283195 012-7951 127951
01-10 H6 H006-0283205 011-2578 ~.... 112578
01-10
2%
01-1-l ~.______1_ G_1..7.9. -5308280
01-11 .._________G_.5. 09-0389511
01-10 .._........... Gi40-7375056
10-4, 12
101-12
101-2, 4
HI
G503-73’71286
G503-7368267
G503-7371272
G740-7375055
G740-7372554
HlOl-0119981
I
2805-737-2554
011-9981
CU-28648
WO-118290
FR-11580
WO-119985
FR-11583
WO-119983
CU-28651U
WO-118289
WO-A6919
WO-A5105
WO-630299
WO-801148
WO-A17842
7375057
5308280
A308282
7375056
7371286
7368267
7371272
7375055
7372554
119981
Hl HlOl-0137133 013-7133 ~..~ ~. ..~~.~.~~ 137133
Hl HlOl-0132684 5305-013-2684 _......... ..__. . . .._ 132684
GASKET, cover bolt, cop, 0.750 OD, 0.540 ID, 0.062 thk
(used w/FILTER, H016-0540501)
GASKET, cover, ru, 5.125 OD, 4.375 ID, 0.058 thk (used
w/FILTER, H016-0540501)
GASKET, head (used w/FILTER, G740-7375060) . .._
GROMMET, oil filter element (used w/FILTER, H016-
0540501)
GROMMET, ru, split, ia/si ID (mounting bracket) ._.....
HEAD, w/CARTRIDGE, assy (used w/FILTER, G740-
7375060)
NUT, hex, No. 12 (0.216)-24NC _.__..____.._..._._.....................
SCREW, fil-hd, No. 12 (0.216)-24NC x g . . ..____..___
PLUG, pipe, hex-hd, br, K in (engine oil filter drain)
(used w/FILTER, H016-0540501) (used on vehicles
PLUG, PIPE, sq-hd, br, K in (engine oil filter drain)
(used w/FILTER, G740-7375060) (used on vehicles
RING, reinforcing (used w/FILTER, G740-7375060)......
SCREW, cap, hex-hd, S, oil filter cover, TAG-20NF-1 x 11146
(cover attaching) (used w/FILTER, H016-0540501)
SPRING, tension, locking, cover bolt (used w/FILTER,
H016-0540501)
SUMP, oil filter (used w/FILTER, G740-7375060) . . ..__
0106.5-CRANKCASE VENTILATION
BODY, crankcase, assy ...~~ .._. _................_._.........
BRACKET, support, oil filter pipe ~~~ ~~~.~...~
GASKET, crankcase ventilator to valve spring cover......
PIPE, oil filter...~
SWIVEL, control wire (valve).. .~ ~.
PIN, COTTER, cd-pltd, S, 14 x s (used w/VALVE,
G742-7372752)
PIN, COTTER, split, S, pltd, i/(6x 74 (used w/VALVE,
G740-7372553)
SCREW, MACHINE, rd-hd, S, cd or zn-pltd, No. 6-
32NC-2A x zdG
WASHER, FLAT, light series, S, cd or zn-pltd, K in..
WASHER, FLAT, med series, S, cd or zn-pltd, 3!e in
(used w/VALVE, G742-7372752)
1
1
1
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

01-5
01-4
(2) (3)
I
(4)
I
(3)
!
(6)
REFER-ENCE
SYMBOLS
ORDPlANCE FEDERAL
ORDNANCE
PART NO.
G’740-7372553 .~~_~~~W. O-A17841 7372553
G742-7372752 737-2752 ANB-SK950 7372752
WO-804276
G740-7375172 ..~ WO-648083 7375172
G740-7410836 TV ANB-SK971 7410836
H4 H104-0125928
H6 H006-0214315 _........... ._........_ 137405
H6 H106-0444038 044-4038 ,.. ~.~~ 444038
~... G740-7372557 ~._~ ... WO-641050
..__ G740-7047950 ..~ ~. WO-A17083
G503-7371283 ..~... WO-639980
G503-7371284 ~. .._ WO-314338
G740-7376904 ~.
G503-7371267 .._.. _.
G740-7372592
G758-8331932 .._
VG-2129
WO-806515
WO-630398
AHC-AF504-22 W
WO-800594
WO-808359
7372557
7047950
7371283
7371284
7376904
7371267
7372592
8331932
G740-7369882 AHC-AF503-13% 7369882
WO-802146
WO-809916
DESCRIPTION
(6) (9)
Q/$;;TY
PORATED I“ 0”:’
i IN UNIT ISSUE
0106.5-CRANKCASE VENTILATION-Continued
I I
VALVE, crankcase ventilation, assy (supersedes VALVE, 1
(3740-7375172) (superseded by VALVE, G740-
7410836) (used on vehicles after serial No. 11169)
VALVE, control, ventilation, w/o PIN (superseded by
VALVE, G742-7372752)
ea
ea
VALVE, control, ventilation, w/o PIN (supersedes
VALVE, G740-7372553)
ea
VALVE, control, w/PIN, assy (superseded by VALVE,
8393083) (used on vehicles through serial No. 11169)
VALVE, control, w/PIN, assy (supersedes VALVE,
8393083)
ea
ea
0106.6-OIL LINES, LEVEL GAGE, AND OIL PAN
I I
CLIP, closed, S, cd or zn-pltd, 74s in OD, hole for $‘s in
bolt (gear cover bolt)
CONNECTOR, flared tube, inverted, br, M in tube,
W in male pipe end (w/o NUT) (oil filter inlet line)
ELBOW, PIPE, br, automotive, 90 deg, extended, 5s in
(oil filter inlet line to cylinder head)
FITTING, oil timing gear .._ _ . . .._._............
GAGE, bayonet type, oil level, w/CAP .._. . ._......._
GASKET, oil pan ~~.~
GASKET, oil pan drain plug (superseded by GASKET,
G740-7376904)
GASKET, oil pan drain plug (supersedes GASKET,
G503-7371284)
GASKET, oil strainer support .._ . . ..__......._......
LINE, flexible, oil filter inlet, 22% lg (used w/FILTER,
G740-7375060)
LINE, flexible, oil filter, inlet, assy (used w/FILTER,
H016-0540501)
LINE, flexible, oil filter outlet, 13 M lg (used w/FILTER,
G740-7375060)
LINE, flexible, oil filter outlet, assy (used w/FILTER,
H016-0540501)
1
1
2
1
1
1
1
1
1
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

G503-73’71278
HlOl-0442695
PAN, oil, assy .._.......... _.............___.._........................
BOLT, INTEGRAL LOCK WASHER, ?&18NC-2 x
%$ S, plain finish (oil pan to block) (superseded by
BOLT, HlOl-9409101)
BOLT, MACHINE, hex-hd, w/spring lock washer, S,
cd or zn-pltd, 5$&18NC-2 x s (supersedes BOLT,
HlOl-0442695)
BOLT, INTEGRAL LOCK WASHER, external tooth
type, hexagon head, S, cd or zn-fin, 5&18NC-2 x 1
(superseded by BOLT, HlOl-0423563)
BOLT, INTEGRAL LOCK WASHER, ext-tooth,
hex-hd,‘S, cd or zn-pltd, 5%&18NC-2 x % (supersedes
BOLT, HlOl-0423562)
PLUG, drain, S, x in (oil pan) ..___.___.........................
1
14
2805-495-9519 WO-A7238 7371278
044-2695 . . . . 442695
HlOl-9409101 .__.___W O-805771 9409101
ea
ea
14 ea
HlOl-0423562 042-3562 ___~_ ............ _...........__ 6 ea
HlOl-0423563 042-3563 _..._........ ~~_~~ ~~~ 423563 6 ea
.._ FM-GPW6727 7388074
WO-639979
.._.. WO-630396 7036578
01220123 120123
WO-804404 8328413
2805-495-9558 WO-630397 7371264
018-9691 .__._ 189691
ea
ea
01-4
01-3, 4
G503-7388074
G503-7036578
HOOl-4417741
G758-8328413
G503-7371264
HlOl-0189691
1
STRAINER, oil, floating, engine, assy .._._........... 1
PIN, COTTER, split, S, cd or zn-pltd, W x 1% .
SUPPORT, floating oil strainer (optional w/SUPPORT,
G503-7371264)
SUPPORT, floating oil strainer (optional w/SUPPORT,
G758-8328413)
BOLT, INTEGRAL LOCK WASHER, header-pt,
hex-hd, S, 5/(6-18NC-2 x % (superseded by SCREW,
HlOl-0451975)
SCREW, MACHINE, hexagon head, w/spring lock
washer, S, cd or zn-pltd, she-18NC-3 x K (supersedes
BOLT, HlOl-0189691)
ea
01-4 ea
%
ea
HlOl-0451975 2 ea
I 0108-MANIFOLD AND HEAT CONTROL
BEARING, heat control valve shaft ..__._............................... _
GASKET, intake and exhaust manifold .._ ._....._......__~ .._
GASKET, intake to exhaust manifold . . . .._............._ .._........
LEVER, counterweight, heat control valve . .._....................
KEY, heat control valve lever .._.__._...
NUT, PLAIN, HEXAGON, S, cd or zn-pltd, No. 10
(0.190)-24NC-2
SCREW, MACHINE, round head, S, cd or zn-fin, No.
lo-24NC-2A x x
MANIFOLD, exhaust .._... . ..__. .._._...... .._ _........................
MANIFOLD, exhaust, assy ~._ _...._._ ..__.__
MANIFOLD, exhaust, w/BEARING, assy .._......
MANIFOLD, intake.. .._ _......._..... . . ..___._____.......................
G503-7371394
G50330194021
G503-7371388
G503-7371392
G503-7371396
HOOl-4035661
WO-636438
WO-638640
WO-634811
WO-637210
WO-637211
2
1
1
7371394
O-13
O-13
(ii-13
O-13 012-0361
7371388
7371392
7371396
120361
O-13 HOOl-5148281 5305-012-0910 120910
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
1
1
01-13
O-1, 3, 4
WO-A659
WO-801826
WO-A5565
WO-800098
1
1
1
G740-7375054 7375054
O-13 7994936

61-13
01-13
‘01-1, 4
01-13
2%
01-13
01-13
01-13
01-4
01-13
(2)
REE-SYMBOLS
Hl
Hl
Hl
Hl
. . . . .
Hl
H6
. _
(3)
ORDNPNCE
STOCK NO.
HOOl-0725270
HlOl-0111318
HlOl-0178453
HOOl-1310620
G503-7371389
G740-7372562
HlOl-0423562
H006-0283569
G503-7371391
G740-7372563
G503-73’71395
G503-7371393
G503-7371398
0
.
.
0
0
..~
.
,...
. .
(4) (5) (7)
FEDERAL
STOCK NO.
50-3354
42-3562
14-3933
-
. .
MFR’S PART NO.
WO-800366
WO-A564
WO-344732
WO-800365
WO-637206
CHV-S-2843
WO-647042
WO-639743
WO-636439
WO-63’7209
1673498
io3354
MANIFOLD, intake and exhaust, assy . . . ..__..__.___
NUT, SELF-LOCKING, HEXAGON, brass, plain,
g-24NF-3
-11318
.78453
-125’72
7371389
‘372562
123562
,43933
STUD, S, cd or zn-pltd, s-16NC (%a) x s-24NF-2
(s) x 11x6 (superseded by STUD, HlOl-0178453)
STUD, S, cd or zn-pltd, M-16NC (g/is) x s-24NF-2
(g) x 19/(6 (supersedes STUD, HlOl-0111318)
STUD, S, $+16NC x s-24NF-2 x 23/(.~ _...........__.._........
WASHER, S, ‘343 ID, ‘3/ib OD, G to 3A6 thk.. . . .._._. ...
MANIFOLD, intake, assy., ~~. ... .. . .. . . . . ..___._............ ...
BOLT, INTEGRAL LOCK WASHER, external tooth
type, hexagon head, S, cd or zn-fin, %a-18NC-2 x 1
PLUG, PIPE, sq-hd, CI, cd or zn-finish, $&18NPT
(primer holes in manifold) (used on vehicles after
serial No. 47771)
1371391 SHAFT, heat control valve...~. . .._..................... ~_~ . . .._._._._..._.
7372563 SPRING, heat control valve (Bi-metal) .._____.._......___....._.._..
7371395
7371393
7371398
STOP, heat control valve spring ..__........__.._...........
VALVE, heat control _....._.......................................................
WASHER, S, 0.310 ID, 1% OD, W thk (heat control
valve spring)
DESCRIPTION
0108-MANIFOLD AND HEAT CONTROL
-Continued
9
P
I
. .
. .
1
7
2
2
2
2
1
4
2
1
1
1
1
1
(9)
UNIT
i&E
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

KW Itern
A -BEARING ..................................
B -SPRING ......................................
C -SEAL ............................................
D -STUD. .........................................
E -WASHER ....................................
F -RETAINER ..............................
G -SPRING ......................................
H -LEVER ........................................
J -BRACKET ................................
K -NUT ............................................
L -SCREW.. ....................................
M -WASHER ....................................
N -NUT ............................................
i
-ROD ............................................
-SCREW ......................................
R -YOKE ..........................................
S -NUT ............................................
T -CABLE ........................................
Part Group I Key Itern Part
710203 0202
7371366 0202
7371337 0202
5246557 0202
834550 0202
7371340 0202
5246558 0202
7372823 0202
7368260 0202
271187 0202
123473 0202
120383 0202
451403 J202
7372826 0202
181618 0202
7371363 0202
120368 0202
8328129 0202
U -CLAMP ......................................
V -SEAL.. ........................................
W -CLAMP .....................................
x -SUPPORT ........................ .........
Y -PEDAL, ASSY.. ........................
Z -PAD, ASSY ................................
AA -BOLT ..........................................
BB -PAD ............................................
CC -SPRING. .....................................
DD -KEY ............................................
EE -WASHER ....................................
FF -BEARING ..................................
GG -SHAFT ........................................
HH -BAR ............................................
JJ -PIN ..............................................
KK -FORK.. ........................................
LL -CARRIER __________________________________
8328434 0202
8332072 0202
8328435 0202
8328439 0202
7371342 0202
7372825 0202
9409103 0202
8328436 0202
8387940 0202
124549 0202
502242 0202
7372840 1206
7340237 1206
8677304 1204.1
544190 0202
7371338 0202
7372822 0202
51

0 z (1)
U;;T;;-
02-l
02-l
02-l
z 02-l
02-l
02-l
(2)
-
,
(3)
ORDNANCE
STOCK NO.
;503-7371368
. .
;740-8328127
;740-7372661
_
. . . . . . ;741-7705721
_
_ . . . ;740-8328265
Hl
3740-7372664
3503-7324841
HOOl-7018711
H12 H012-0712167
02-2 H12 H012-0710203
(4)
FEDERAL
STOCK NO.
1305-360-798E
1310-012-0638
(5)
MFR’S PART NO.
NO-639578
LBF-4278
APB-4278
WO-649971
iBF-657
APB-657
WO-640578
,VO-804805
3&B-11966
WO-802410
3&B-6170
WO-802411
3&B-3874
WO-641695
4BF-4495
WO-805017
ABF-4374
WO-801617
ABF-10000
WO-804746
ABF-8501-38
WO-802379
WO-630129
AB-A9351
WO-635529
7371368
8677055
8676998
8328127
7372661
8677053
7705721
8328265
7372664
7324841
120638
712167
s710203
(7)
DESCRIPTION
-
Qi
P(
II
GROUP 02-CLUTCH
0201-DISK AND PRESSURE PLATE
3EARING, pilot, bushing type . . . .._.__
3RACKET, clutch (used on engines through serial No.
74419)
1
1
3RACKET, clutch (0532) (used on engines after serial
No. 74419)
1
3ISK, clutch driven, w/HUB, assy (used on engines
1
DISK, clutch driven, w/HUB, assy (used on engines
FACING, clutch... . . . . . . . ..__.....................................................
1
2
RIVET, tubular, fl-hd, br, 9’$ diam, 134 lgh .._............... 16
PLATE, pressure (used on engines after serial No. 74419)) 1
PLATE, pressure (used on engines through serial No.
74419)
PLATE, pressure, w/COVER, assy (used on engines
1
1
PLATE, pressure, w/COVER, assy (used on engines
SCREW, cap, hex-hd, $&-18NC-2 x lib . . . .._......_.....
WASHER, LOCK, S, cd or zn-finish, style No. 9, 0.601
OD, jdG in bolt size
0202-RELEASE AND CONTROLS
BEARING, ball, clutch release, JAN 999913098-OOOC
(SR, 1.500 bore, 2.8125 OD, 0.6820 width) (used or
BEARING, ball, clutch release, AB-935-s (SR, 1.5OC
bore, 2.8125 OD, 0.625 width) (optional w/BEARING
700988) (used on engines after serial No. 74419)
I
(9)
JNIT
S%E
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

02-2
02-2
02-2
02-2
02-2
02-2
8 02-2
ID2-1
102-l ................ G503-7351395
‘02-2
‘02-2
H12 H012-1001110
__.._______G_50_3.- ‘7368260
Hl HlOl-027118’7
Hl HOOl-4167561
Hl HOOl-5419781
Hl HOOl-7025711
_............... G740-8328129
G740-7372821
___._.G_ 740-7372822
H6 H006-8328435
H6 H006-8328434
..............................................
H16 H016-0504203
..~ G503-7371338
G503-7371339
G740-7372823
H001-4417741
___..._........._.__......N...D. -CT24 700988
WO-645249
NC-6048
WO-649339
2520-736-8260 WO-A180 7368260
271187
012-0368 . . . . . . . . .._______....................1..2. 0368
012-3473 _....................................... 123473
5310-012-0214 _...__..______.....................1..2..0. 214
..__ TRU-SA4126
WO-805935
.._... WO-640124
tiO-807488
_...__...__...__..........W....O -644366
050-4203
8328129
7372821
7372822
8328435
1 .._....___. ._._ _.____~__...._ ._... / 8328434
ABF-130003
WO-806012
ABF-4468 8677066
ARQ-4468
WO-801698
ABF-283 7351395
WO-638157
ABF-4282
WO-800728
504203
~~. WO-630112
WO-630068
~_ WO-642624
WO-642623
WO-A175
WO-A174
012-0123
7371338
7371339
7372823
120123
BEARING, ball, JAN 999-13024-0000 (SR, clutch re-lease,
1.5000 bore, 2.8125 OD, 0.625 width) (optional
w/BEARING H012-0710203) (used on engines after
serial No. 74419)
BRACKET, control tube stud (on frame).~ . .._..__.....
NUT, hex, It, ext-teeth-lockwasher, S, cd or zn-pltd,
5?&24NF-2B (supersedes NUT 120368 and WASHER
120214)
NUT, PLAIN, HEXAGON, reg, s-fin, S, s/(6-24NF-2
(superseded by NUT HlOl-0271187)
SCREW, hex-hd, S, cd or zn-pltd, SAC-24NF-3 x s ..__
WASHER, LOCK, S, med, cd or zn-pltd, 5/(6i n (super-seded
by NUT HlOl-0271187)
CABLE, control lever (used on engines after serial No.
74419)
CABLE, control lever (used on engines through serial
No. 74419)
CABLE, control, w/SEAL, assy (used on engines after
serial No. 74419)
CARRIER, release bearing . . . . .._... . . . ..__.._._.............
CLAMP, hose, 1 $$j .in (control tube lever release cable
seal) (used on engines after serial No. 744.19)
CLAMP, hose, x in (control tube lever release cable seal)
CLIP, pressure spring release lever (used on engines after
serial No. 74419)
CLIP, pressure spring release lever (used on engines
CUP, pressure plate spring (used on engines after serial
No. 74419)
1
2
1
1
1
3
CUP, pressure plate spring (used on engines through
serial No. 74419)
FITTING, lubr, hyd type, style No. 1, S, cd or zn-fin,
x-28NF male, ball check valve
FORK, release .._..._.. ..___..
FULCRUM, clutch release lever . . . .._..........._.. ~.. .
LEVER, control, w/TUBE (welded)
Composed of:
1 LEVER
1 LEVER
1 TUBE
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
PIN, COTTER, split, S, cd or zn-pltd, W x 1 x .._..____ 2 ea

0 !z (1)
ILLUSTRA-TION
NO.
02-l
02-2
02-2
02-2
g
02-2; 18-3
02-2
02-2
02-2
02-l
(2) (3)
I
Q
I
(5)
I
w
RiE- ORDNANCE FEDERAL
OP;lyA;tdE
SYMBOLS
. . . .. . . ....................................... _. ...... . ....... . ............. ABF-688 8677275
WO-640112
ABF-4279
WO-649972
G740-7372824 .............................. WO-A6359 7372824
...... G758-8328436 _ ........................ . . WO-807208 8328436
...... G740-7372825 2540-737-2825 WO-800760 7372825
Hl HOOl-5419221 012-2027 ...................................... 122027
Hl HlOl-9409103 ............... ~. ................. .......... ......... 9409103
Hl HOOl-7025711 5310-012-0214 ...................... ......... 120214
............... G503-7371342 2540-495-9499 WO-A10269 7371342
Hl HlOl-0123798 012-3798 ...................................... 123798
Hl HOOl-0518022 012-4549 ...................................... 124549
Hl HO014167561 012-0368 ........................................ 120368
Hl HlOl-0271187 ...... ....... ...................................................... 271187
Hl HOOl-5454001 018-1618 ........................................ 181618
Hl HOOl-7025711 5310-012-0214 ..................................... 120214
G503-7375797 .~. . ._......_....... ABF-287 7375797
WO-638159
DESCRIPTION I I Qy;;J;TY
PORATED “ST
IN UNIT ISSUE
1 I
OPOZ-RELEASE AND CONTROLS-Continued
LEVER, pressure spring release (used on engines after
serial No. 74419)
LEVER, pressure spring release (used on engines through
serial No. 74419)
PAD, draft pedal shank (superseded by PAD, G758-
8328436)
PAD, draft pedal shank (supersedes PAD, G740-
7372824)
PAD, pedal, assy (welded)
BOLT, MACHINE, hex-hd, S, cd or zn-pltd, sh-18NC-
3 x 1 K (superseded by BOLT, HlOl-9409103)
BOLT, MACHINE, hex-hd, w/spring lock washer, S,
cd or zn-pltd, 5&18NC-2 x 1% (supersedes BOLT,
122027 and WASHER, 120214)
WASHER, LOCK, S, med, cd or zn-pltd, 546i n (super-seded
by BOLT, 9409103)
PEDAL, assy ~.
BOLT, MACHINE, hex-hd, S, cd or zn-pltd, s/(6-
24NF-3 x 1% (superseded by SCREW, 181618)
KEY, WOODRUFF, S, z?Gx N (No. 606 or 9) (clutch
pedal to shaft)
NUT, PLAIN, HEXAGON, reg, s-fin, S, 5%-24NF-2
(superseded by NUT, HlOl-0271187)
NUT, hex, w/external-lock washer, Keps type, 5/(6-
24NF-3 (supersedes NUT, 120368 and WASHER,
120214)
SCREW, MACHINE, hex-hd, S, 85,000 psi yield
strength, cd or zn-pltd, 5&24NF-3 x 1% (super-sedes
BOLT, HlOl-0123798)
WASHER, LOCK, S, med, cd or zn-pltd, 5% in (super-seded
by NUT, HlOl-0271187)
PIN, pivot, clutch (used on engines after serial NO.
1
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea

ABF-4285
WO-800040
ABF-659
WO-804744
ABF-4459
WO-802381
WO-A177
WO-640123
ABF-4286
WO-649976
8676974 3
PIN, pivot, clutch (used on engines through serial No.
74419)
RETAINER, auxiliary spring (used on engines after
serial No. 74419)
RETAINER, auxiliary spring (used on engines through
serial No. 74419)
RETAINER, control tube spring
ROD, pedal, release
PIN, COTTER, split, S, cd or zn-pltd, 342 x x.
SCREW, hex-hd, alloy-S, cd-pltd, %-28NF-2 x g
(adjusting, .pressure spring lever) (used on engines
SCREW, hex-hd, alloy-S, l&28NF-2 x 54 (adjusting,
pressure spring lever) (used on engines after serial
No. 74419)
NUT, lock, hex, S, cd-pltd, x-28NF-2 (used on
NUT, lock, hex, S, %-28NF-2 (used on engines after
serial No. 74419)
WASHER, plain, S, 0.328 ID x 1.125 OD x 0.076-0.069
thk (used on engines after serial No. 74419)
WASHER, S, cd-pltd, 9:; ID x 1 OD x 0.057-0.076
thk (used on engines through serial No. 74419)
SEAL, cable, clutch release (ru) (superseded by SEAL,
G740-8332072)
SEAL, cable, clutch release (ru) (supersedes SEAL,
G740-8328130)
SEAL, dust, control tube
SPRING, auxiliary pressure (used on engines after
serial No. 74419)
SPRING, auxiliary pressure (used on engines through
serial No. 74419)
SPRING, clutch and brake pedal shank draft pad
SPRING, compression, S, 0.063 diam wire, 94s OD, 8
coils, 1% free lgh (control tube)
SPRING, pressure (used on engines after serial NO.
74419)
SPRING, pressure (used on engines through serial NO.
74419)
G50337371366 1 ea
G50338387940
SPRING, release bearing carrier ----
SPRING, tension, 40 coils, 5% overall lgh, retracting,
pedal
8677084
7371340
7372826
119117
ea
ea
ea
02-l 3
3
02-2 G50337371340 .~~~
2
02-2
G740-7372826
Hl HlOl-0119117 011-9117
ea
ea
ea
ea
2
3
02-l (............... ]....... . ..].. 1 ABF-4494
WO-805014
I ea
ABF-4287
WO-649977
ABFP2322
WO-805016
ABFP4234
WO-805015
ABF-4466
WOP801641
G740-8328130 WO-804402
/ .__~ / G740-8332072 j j WO-808936
ea
02-l
02-l
z
02-2
02-2
02-l
I ea
I ea
ea
8328130
8332072
7371337
ea
ea
2
3
G503-7371337 WOpA887 ea
ABF-130002
WOP804745
ABF-4458
WOP802380
WO-650684
524-6558 WO-A178
ea
ea
ea
ea
(3740-7697454
G10445246558
8677083 3
7697454
02-2 5246558
r02-1 ABF-2825
WO-638156
ABF-4280
AVM-4280
WO-649975
WO~630117
WO-630593
3
3
ea
8673972 ea
7371366
8387940

0
(1) (2) (3) (4) (5) (6)
UU~T;.$- REFER- ORDNANCE FEDERAL
. ENCE STOCK NO. STOCK NO. MFR’S PART NO.
;;;;A;;E
SYMBOLS
02-2 ._____ ___.._G_50_3_-5 246557 2520-524-6557 WO-A181 5246557
02-2 .. .._____....___._.._____._.......__..............._. ._.___ _.____..__.._.........................................4 51403
Hl HlOl-0118616 011-8616 _...__......__.......................... 118616
02-2 Hl HOOl-7025771 5310-012-0383 __....... . . . .._......... 120383
WO-A179 8393045
02-2 .._............. G758-8328439 .________..._...............W.. O-807471 8328439
02-2 H9 H009-0834550 __.._..........__.__......................................... . 834550
02-2 Hl HlOl-0502242 5310-050-2242 _........__.......__........... 502242
G740-7372827 5310-456-6298 WO-A498 7372827
g
G740-73’75065 . .._...._._........_......... WO-A6360 7375065
02-2 ..__ G503-7371363 5340-737-1363 WO-632177 7371363
02-2 Hl HOOl-4167561 012-0368 _.........._............................ 120368
G503-7326118 5315-732-6118 WO-339043 7326118
Hl HlOl-0119117 011-9117 _.........._....____.................... 119117
02-2 Hl HlOl-0544190 054-4190 _.......__. _........._......... 544190
_ I I I I I
(7) (‘3) (9)
DESCRIPTION
UNIT
lS%E
0202-RELEASE AND CONTROLS-Continued
STUD, ball, S, r/16-14NC-2 (control tube) .._.......__......_ _ ....._
NUT, hex, S, cd or zn-pltd, %&14NC-2 (supersedes
NUT, HlOl-0118616)
NUT, PLAIN, HEXAGON, S, parkerized, r/16-
14NC-2, light series (superseded by NUT, 451403)
WASHER, LOCK, 746 in, medium, S, cd or zn-pltd~ ..___
STUD, clutch control ball, assy. .~~. _..........._ ._.......................
SUPPORT, seal, bell housing (used on engines after
serial No. 74419)
WASHER, felt, N OD x K thk (control tube)... __ _._.......__.
WASHER, FLAT, plain, S, 114 ID, 1% OD, % thk
(pedal shaft) (supersedes WASHER, G740-7372827)
WASHER, FLAT, S, liQ$z ID, 1% OD, s thk (pedal
shaft) (superseded by WASHER, HlOl-0502242)
WASHER, plain, S, ir/si ID, 1% OD, 0.074 in thk (brake
pedal shank draft pad)
YOKE, rod end, adjustable, control cable ._.. . . .._......._.........
NUT, PLAIN, HEXAGON, reg, s-fin, S, ?&24NF-22
PIN, clevis, S, 5/is x 274 (superseded by PIN, HlOl-
0544190)
PIN, COTTER, split, S, pltd, 3dZ x W__ . . . . . . . . .._.......__........
PIN, STRAIGHT, HEADED, clevis, S, %& x a742
(supersedes PIN, G503-7326118)
1
1
1
1
2
1
1
1
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
I ea

This Page Blank Intentionally
57

ORD 9 SNL G-740

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (20)

En vedette

En vedette (20)

Similaire à ORD 9 SNL G-740

Similaire à ORD 9 SNL G-740 (20)

Plus de blancaisabelcig

Plus de blancaisabelcig (18)

Dernier

Dernier (20)

ORD 9 SNL G-740