1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 20, 2012
Name-Surname Mr. Natthanan Chalermmekol
Student ID. 53211810
Group Name Instinct design group (Id)
M 53211801
Engineering Team Top 53211816
Members Yui 53211835
Ball 53211836
Product Design P’ Jub
Team Members P’ Ploy
Weekly Progress
Last week I cannot go to Bangkuntaen because I have sick. But in the evening, I went to talk
with my group at Bangmod.
This week, we talk about our project are food waste measurement to use sensor .We discuss
the function about heating the food. That has shown on LED and display module. On display
module show about food is waste or not. If food is waste LED and display will show. This product
can warm and heat food. This product use stick heater teachnology.
Plastics such as acrylic can be formed (shaped) in different ways. One of the most
popular methods of shaping plastic materials like acrylic is to fold (bend) it on a
‘strip heater’, at different angles. An example of a strip heater is shown below. A
heating element extends along the length of the strip heater and gives off intense
heat when it is turned on.
Figure 1. My team
Figure 2. Strip Heater
Engineering Analysis
Strong Point
- If food is not waste you can warm it early.
Week Point
- Old people may not be see LED.
Next Week Job
- We will assign our work.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI