Xilinx ise tutorial-a

http://www.bized.co.uk

Xilinx ISE 10.1 tutorial A

Prepared by
Alaa Salah Shehata
Mahmoud A. M. Abd El Latif
Mohamed Mohamed Tala’t
Mohamed Salah Mahmoud

Version 02 – October 2011
Copyright 2006 – Biz/ed


Synthesis first steps


tutorial


First click on the ISE program to open it … 3
This screen will appear click ok or see tips of the day  Copyright 2006 – Biz/ed

tutorial


In first use of the program : from toolbar choose : 4
Edit menu >> preferences >>Select (integrated Tools) from the left side . 2006 – Biz/ed
Copyright

tutorial


From the first line press on the bottom beside (default) as shown 5
A new menu will appear select desktop to see( Modelsim) shortcutCopyright 2006 – Biz/ed
.

tutorial


6
A new menu will appear select desktop to see( Modelsim) shortcut .Select
Modelsim SE 6.4c (so this program you will use it as your simulation tool ) 2006 – Biz/ed
Copyright

tutorial


Now you are ready to make new project .

Note : this previous steps you will make it only one time in your first use of
the program.

7

tutorial


From file …. Choose ..new project
Choose your project name & project location you will save it in .
This window will appear to you : you will determine you FPGA type and its
family …and speed duo to its datasheet.
8

tutorial


9
Now your new project will appear in this window on its left

tutorial


You need to add your project files (as your project components) so
Click Right on your project file then choose (new source) then VHDL module
from your menu then determine its name .
10

tutorial


You can specify your block(Entity) ports from this window …. Select each port 11
type (In or out) and select each port (size) . Copyright 2006 – Biz/ed

tutorial


12
You are ready to write your code in this new file . Copyright 2006 – Biz/ed

tutorial


If there are no errors in your code
check syntax process will succeed
you can be able to make next steps
you will know it later in the tutorial

After writing your code you need first to check syntax 13
From process menu open synthesize then double click on check syntax . 2006 – Biz/ed
Copyright

tutorial


To see your block press on view RTL schematic and double click on the block to see
the Hardware that your code express . ( the tool translate your code into Hardware ).
14


Simulation first steps


tutorial


To perform simulation on your project : 16
From source menu select Behavioral Simulation instead of implementation .2006 – Biz/ed
Copyright

tutorial


From Modelsim Simulator double click on
Simulate Behavioral Model simulation
program(ModelSim ) will be opened .

To perform simulation on your project : 17
From source menu select Behavioral Simulation instead of implementation .2006 – Biz/ed
Copyright

tutorial


You will right click on your inputs and select Force to enter a value in this
input .
Press on run to make your required simulation .

18

tutorial


You can add cursor to know any signal value at any specified time in your 19
simulation . Copyright 2006 – Biz/ed

tutorial


See You Next Session

20

Xilinx ise tutorial-a

Recommandé

Recommandé

Contenu connexe

Similaire à Xilinx ise tutorial-a

Similaire à Xilinx ise tutorial-a (20)

Plus de Mahmoud Abdellatif

Plus de Mahmoud Abdellatif (10)

Dernier

Dernier (20)

Xilinx ise tutorial-a