1. 210
SELECTION GUIDE
PROXIMITY SENSOR
PROXIMITYSENSOR
14
•REVERSE POLARITY PROTECTION - Internal circuitry to prevent
sensor damage due to improper power supply polarity.
•MAXIMUM SENSING DISTANCE - The maximum theoretical
distance from a sensor face that a target can be detected.
(A)•SENSING DISTANCE - The usable sensing distance which
takes into account maximum variations in supply voltage and
temperature. This distance is generally recommended to be
80% of Maximum Sensing Distance.
(B)•HYSTERESIS - The difference between the pickup point of
a target as it approaches the sensing face and the release
point of a target as it moves away from the sensing face. It
is expressed as a percentage of the Maximum Sensing
Distance.
(C)•SHIELDED SENSOR - A sensor only the sensing face
exposed which permits unrestricted mounting in the vicinity
of a metallic surface. It has a shorter sensing distance than
a non-shielded sensor.
(D)•NON-SHIELDED SENSOR - A sensor with an exposed
sensing head yielding a longer sensing distance than
shielded versions. Non-shielded sensors must be mounted
with adequate clearance between the sensing head and a
metallic mounting.
(E)•SWITCHING FREQUENCY-The maximum speed a sensor can
turn ON and OFF using a Standard Target.
OFF ON
M
M
2M
t1 t2 t1
=f t1+t2
1
Sensing distance
SENSOR
SENSOR
Hysteresis
SENSOR
Sensing distance( )
(A) (B)
(C) (D)
(E)
1
2
Table of Common Material Correction Factors
Inductive Sensors Capacitive Sensors
Mild Steel 1.00
Stainless Steel 0.85
Brass, Bornze 0.55
Aluminum 0.45
Copper 0.40
Metals 1.00
Water 1.00
Plastic 0.50
Glass 0.50
Wood 0.40
Metal Steel Copper
Plating
Zn 5~15μ
Cd 5~15μ
Ag 5~15μ
Cu 10~20μ
Cu 5~15μ
Cu 5~10μ
100
90~120
100~110
60~90
70~95
-
70~95
100
95~105
95~100
85~100
95~105
95~105
-
■ Sensing distance
Sensing distance are based on a standard target made of
mild steel. If the target to be sensed is other than mild
steel, or if the surface has been plated, a Material
Correction Factor must be applied. Thus the Practical
Sensing Distance must be multiplied by the Material
Correction Factor to obtain a Corrected Sensing Distance.
Refer to the Table of Common Material Correction Factors.
The correction factors shown are only to be used as a
guideline.
■ Terminology
•PROXIMITY SENSOR - A device which detects the presence of
an object without physical contact.
•INDUCTIVE SENSOR - A sensor that reacts to a metal target.
The target is sensed when the energy emitted from the
sensing face is absorbed by the target.
•CAPACITIVE SENSOR - A sensor that reacts to a solid, liquid
or granular target. The target is sensed when the
dielectric surrounding the sensing face is changed by the
target.
•LEAKAGE CURRENT - The amount of current flowing through a
load when a two-wire AC sensor is in the OFF state.
•NPN OUTPUT - A transistor output which switches the
negative side of a DC power supply(common) to the load.
It is also known as Current Sinking.
•PNP OUTPUT - A transistor output which switches the positive
side of a DC power supply to the load.
It is also known as Current Sourcing.
Thickness

2. 211
SELECTION GUIDE (HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ Output circuit
■ Ordering information
Model Output type
N
P
N
P
N
P
DCswitching
ACswitching
Object
Load [Red~White]
Output Signal
[White~Black]
Output
Object
Load [Red~White]
Output Signal
[White~Black]
Output
Object
Load
Output
+V
OV
Red
main
circuit
100Ω
2.2Ω
8.2㏀
White
Black
Load
main
circuit 2.2Ω
8.2㏀
Red
White
Black
+V
OV
Load
main
circuit
White
Black
Load
main
circuit
NO NC
ON
OFF
L
H
NO NC
ON
OFF
L
H
NO NC
ON
OFF
HYP - 18 S 5 N A F - C D
⑨ Wave Type D Differential Wave Type
⑧
Type of C Connector Type
Connector CR Relay Connector Type
⑦ Detection
F Front detection
U Upper detection (Valid in HYP-18S)
⑥ Output Type
A Normal Open Type
C Normal Close Type
N NPN Type
P PNP Type
⑤
Power supply A AC 2 Wire Type
and Output T DC 2 Wire Type
N4 NPN NO + NC
P4 PNP NO + NC
④ Sensing distance 2~20 Detecting Distance(mm)
S Square Type
R Standard Round Case Type
RL Long Round Case Type
③ Shape RS Short Round Case Type
RP Plastic Case Type
FP Plastic Flat Type
FA Aluminum Flat Type
② Diameter 18
Round Type:Diameter of Head(mm)
Square Type:A side Length of head
① Model
HYP Inductive Proximity Switch
HCP Capacitive Proximity Switch
② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨①
NO. Classification Sign Description
✽ ⑦ None indication is Front detecting type.

3. 212
SELECTION GUIDE (HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ Installation
The possibility of frequency interference exists when
sensors are mounted adjacent to each other. To prevent
this possibility, a minimum spacing between adjacent
sensors must be maintained.
It is good engineering practice to mount sensors either
horizontally or with the sensing face down. This will
prevent metal fillings or other foreign contamination from
falling on the sensor face and causing erroneous
operation.
Round type
e
aMetal
f
c
d
bMetal
MODEL HYP-12R2 HYP-12R4
HYP-18R5
HYP-18RL5
HYP-18R8
HYP-18RL8 HYP-30R10 HYP-30R15
a
b
c
d
e
f
6
-
-
-
24
12
30
-
-
-
60
60
-
12
36
11
36
24
15
-
-
-
36
30
-
24
54
14
48
48
-
54
90
15
90
90
(unit : m/m)
Square type
(unit : m/m)
dc
f
e
c
a
b
c
Metal Metal
Metal
Sensing face
MODEL HYP-18S5 HYP-18S8
a
b
c
d
e
f
15
-
-
10
36
30
24
54
8
20
40
48
15
-
-
25
40
30
HYP-25S5 HYP-25S8 HYP-25S12
24
-
-
25
45
48
36
75
12
36
55
55
30
-
-
30
60
60
HYP-30S10 HYP-30S15
45
90
15
45
75
90
60
-
-
40
80
120
HYP-40S20

4. 213
SELECTION GUIDE (HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ DC Switching Inductive Sensor (3 Wire Round Type)
Frequency
(㎐)
800
800
400
400
350
350
200
200
350
350
200
200
250
250
100
100
0~1.6
(12×12×1)
0~1.6
(12×12×1)
0~3.2
(12×12×1)
1~3.2
(12×12×1)
0~4
(18×18×1)
0~4
(18×18×1)
0~6.4
(25×25×1)
0~6.4
(25×25×1)
0~4
(18×18×1)
0~4
(18×18×1)
0~6.4
(25×25×1)
0~6.4
(25×25×1)
0~8
(30×30×1)
0~8
(30×30×1)
0~12
(45×45×1)
0~12
(45×45×1)
Model
HYP -12R2NA
-12R2NC
HYP -12R2PA
-12R2PC
HYP -12R4NA
-12R4NC
HYP -12R4PA
-12R4PC
HYP -18R5NA
-18R5NC
HYP -18R5PA
-18R5PC
HYP -18R8NA
-18R8NC
HYP -18R8PA
-18R8PC
HYP -18RL5NA
-18RL5NC
HYP -18RL5PA
-18RL5PC
HYP -18RL8NA
-18RL8NC
HYP -18RL8PA
-18RL8PC
HYP -30R10NA
-30R10NC
HYP -30R10PA
-30R10PC
HYP -30R15NA
-30R15NC
HYP -30R15PA
-30R15PC
Sensing
distance
(㎜)
2
2
4
4
5
5
8
8
5
5
8
8
10
10
15
15
1.Power
DC 12~24V
(DC 10~30V)
2. Control output
Max. 200㎃
3. Object
Metallic surface
•Non-metallic
object’s sensing
distance will
be shorten
RemarksAppearance
Mounting distance
(㎜)

5. 214
SELECTION GUIDE (HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ DC Switching Inductive Sensor ( 3 Wire Square type)
RemarksFrequency
(㎐)
500
300
500
300
500
300
500
300
350
350
250
250
200
200
250
250
0~4
(18×18×1)
0~6.4
(25×25×1)
0~4
(18×18×1)
0~6.4
(25×25×1)
0~4
(18×18×1)
0~6.4
(25×25×1)
0~4
(18×18×1)
0~6.4
(25×25×1)
0~4
(25×25×1)
0~4
(25×25×1)
0~6.4
(30×30×1)
0~6.4
(30×30×1)
0~9.6
(35×35×1)
0~9.6
(35×35×1)
0~8
(30×30×1)
0~8
(30×30×1)
Sensing
distance
(㎜)
5
8
5
8
5
8
5
8
5
5
8
8
12
12
10
10
1.Power
DC 12~24V
(DC 10~30V)
2. Control output
Max. 200㎃
3. Object
Metallic surface
•Non-metallic
object’s sensing
distance will
be shorten
Model
HYP -18S5NAF
-18S5NCF
HYP -18S8NAF
-18S8NCF
HYP -18S5NAU
-18S5NCU
HYP -18S8NAU
-18S8NCU
HYP -18S5PAF
-18S5PCF
HYP -18S8PAF
-18S8PCF
HYP -18S5PAU
-18S5PCU
HYP -18S8PAU
-18S8PCU
HYP -25S5NA
-25S5NC
HYP -25S5PA
-25S5PC
HYP -25S8NA
-25S8NC
HYP -25S8PA
-25S8PC
HYP -25S12NA
-25S12NC
HYP -25S12PA
-25S12PC
HYP -30S10NA
-30S10NC
HYP -30S10PA
-30S10PC
Mounting distance
(㎜)
Appearance

6. 215
SELECTION GUIDE (HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ AC Switching Inductive Sensor ( 2 Wire Round type)
■ AC Switching Inductive Sensor ( 2 Wire Square type)
100
100
250
250
0~12
(45×45×1)
0~12
(45×45×1)
0~16
(50×50×1)
0~16
(50×50×1)
15
15
20
20
HYP-30S15NA
-30S15NC
HYP-30S15PA
-30S15PC
HYP-40S20NA
-40S20NC
HYP-40S20PA
-40S20PC
20
20
20
20
0~4
(18×18×1)
0~6.4
(25×25×1)
0~8
(30×30×1)
0~12
(45×45×1)
5
8
10
15
HYP-18RL5AA
-18RL5AC
HYP-18RL8AA
-18RL8AC
HYP-30R10AA
-30R10AC
HYP-30R15AA
-30R15AC
Appearance Model
Appearance Model
Remarks
Remarks
1. Power
AC 100~240V
(AC 90~250V)
2. Control output
Max. 200㎃
3. Object
Metallic surface
•Non-metallic
object’s sensing
distance will
be shorten
20
20
20
20
20
0~4
(25×25×1)
0~6.4
(30×30×1)
0~8
(40×40×1)
0~12
(50×50×1)
0~16
(60×60×1)
5
8
10
15
20
1. Power
AC 100~240V
(AC 90~250V)
2. Control output
Max. 200㎃
3. Object
Metallic surface
•Non-metallic
object’s sensing
distance will
be shorten
HYP -25S5AA
-25S5AC
HYP -25S8AA
-25S8AC
HYP -30S10AA
-30S10AC
HYP -30S15AA
-30S15AC
HYP -40S20AA
-40S20AC
Appearance Model Remarks
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)

7. 216
SELECTION GUIDE (HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ DC Switching Capacitive Sensor ( 3 Wire Round type)
■ AC Switching Capacitive Sensor ( 2 Wire Round type)
Appearance Model Remarks
Appearance Model Remarks
20
20
20
20
0~5.6
0~5.6
0~10.5
0~10.5
8
8
15
15
HCP -18R8AA
-18R8AC
HCP -18RP8AA
-18RP8AC
HCP -30R15AA
-30R15AC
HCP -30RP15AA
-30RP15AC
1. Power
AC 100~240V
(AC 90~250V)
2. Control output
Max. 150㎃
3. Object Steel
steel 50×50×1㎜
50
50
50
50
8
8
15
15
0~5.6
0~5.6
0~10.5
0~10.5
HCP -18R8NA
-18R8NC
HCP -18R8PA
-18R8PC
HCP -18RP8NA
-18RP8NC
HCP -18RP8PA
-18RP8PC
HCP -30R15NA
-30R15NC
HCP -30R15PA
-30R15PC
HCP -30RP15NA
-30RP15NA
HCP -30RP15PA
-30RP15PC
1. Power
DC 12~24V
(DC10~30V)
2. Control output
Max. 200㎃
3. Object Steel
steel 50×50×1㎜
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)

8. SELECTION GUIDE (HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
217
■ DC Switching Inductive Sensor ( 3 Wire Round Relay Connector type)
Appearance Model Remarks
1. Power
DC 12-24V
(DC 10~30V)
2. Control output
Max. 200㎃
3. Object
Metallic surface
•Non-metallic
object’s sensing
distance will
be shorten
800
800
400
400
350
350
200
200
350
350
200
200
250
250
100
100
0~1.4
(12×12×1)
0~1.4
(12×12×1)
0~3.2
(12×12×1)
1~3.2
(12×12×1)
0~4
(18×18×1)
0~4
(18×18×1)
0~6.4
(25×25×1)
0~6.4
(25×25×1)
0~4
(18×18×1)
0~4
(18×18×1)
0~6.4
(25×25×1)
0~6.4
(25×25×1)
0~8
(30×30×1)
0~8
(30×30×1)
0~12
(45×45×1)
0~12
(45×45×1)
2
2
4
4
5
5
8
8
5
5
8
8
10
10
15
15
HYP -12R2NA-CR
-12R2NC-CR
HYP -12R2PA-CR
-12R2PC-CR
HYP -12R4NA-CR
-12R4NC-CR
HYP -12R4PA-CR
-12R4PC-CR
HYP -18R5NA-CR
-18R5NC-CR
HYP -18R5PA-CR
-18R5PC-CR
HYP -18R8NA-CR
-18R8NC-CR
HYP -18R8PA-CR
-18R8PC-CR
HYP -18RL5NA-CR
-18RL5NC-CR
HYP -18RL5PA-CR
-18RL5PC-CR
HYP -18RL8NA-CR
-18RL8NC-CR
HYP -18RL8PA-CR
-18RL8PC-CR
HYP -30R10NA-CR
-30R10NC-CR
HYP -30R10PA-CR
-30R10PC-CR
HYP -30R15NA-CR
-30R15NC-CR
HYP -30R15PA-CR
-30R15PC-CR
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)

9. 218
SELECTION GUIDE (HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
Appearance Model Remarks
Appearance Model Remarks
Appearance Model Remarks
1. Power
AC 100-240V
(AC 90~250V)
2. Control output
Max. 200㎃
3. Object
Metallic surface
•Non-metallic
object’s sensing
distance will
be shorten
20
20
20
20
0~4
(18×18×1)
0~6.4
(25×25×1)
0~8
(30×30×1)
0~12
(45×45×1)
5
8
10
15
HYP -18RL5AA-CR
-18RL5AC-CR
HYP -18RL8AA-CR
-18RL8AC-CR
HYP -30R10AA-CR
-30R10AC-CR
HYP -30R15AA-CR
-30R15AC-CR
50
50
50
50
0~5.6
0~5.6
0~10.5
0~10.5
8
8
15
15
1. Power
DC 12~24V
(DC 10~30V)
2. Control output
Max. 200㎃
3. Object
Metallic surface
50×50×1㎜
HCP -18R8NA-CR
-18R8NC-CR
HCP -18R8PA-CR
-18R8PC-CR
HCP -18RP8NA-CR
-18RP8NC-CR
HCP -18RP8PA-CR
-18RP8PC-CR
HCP -30R15NA-CR
-30R15NC-CR
HCP -30R15PA-CR
-30R15PC-CR
HCP -30RP15NA-CR
-30RP15NC-CR
HCP -30RP15PA-CR
-30RP15PC-CR
20
20
20
20
0~5.6
0~5.6
0~10.5
0~10.5
8
8
15
15
1. Power
AC 100-240V
(AC 90~250V)
2. Control output
HCP-18 Max. 150㎃
HCP-30 Max. 200㎃
3. Object
Metallic surface
50×50×1㎜
HCP -18R8AA-CR
-18R8AC-CR
HCP -18RP8AA-CR
-18RP8AC-CR
HCP -30R15AA-CR
-30R15AC-CR
HCP -30RP15AA-CR
-30RP15AC-CR
■ AC Switching Inductive Sensor ( 2 Wire Round Relay Connector type)
■ DC Switching Capacitive Sensor ( 3 Wire Round Relay Connector type)
■ AC Switching Capacitive Sensor ( 2 Wire Round Relay Connector type)
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)
Frequency
(㎐)
Sensing
distance
(㎜)
Mounting distance
(㎜)

10. 219
DC Switching Proximity Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
Fast and Reliable detection !
•The sensors are totally sealed and can operate in the
most demanding environments.
•Suitable for various limit control and counting control
•Maximum control output is 200㎃
•Ambient temperature -25~70℃
■ Type
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
HYP-12R2N□
HYP-12R2P□
HYP-12R4N□
HYP-12R4P□
HYP-18R5N□ / HYP-18RL5N□
HYP-18R5P□ / HYP-18RL5P□
HYP-18R8N□ / HYP-18RL8N□
HYP-18R8P□ / HYP-18RL8P□
HYP-30R10N□
HYP-30R10P□
HYP-30R15N□
HYP-30R15P□
M12
2mm
4mm
5mm
8mm
10mm
15mm
M18
M30
Non-shielded
Non-shielded
Non-shielded
■ Round type
Appearance Sensing distance Output Suffix code

11. 220
DC Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ Round Relay Connector type
■ Square type
Non-shielded
Output
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
Appearance
Appearance Sensing distance
Sensing distance
Suffix code
HYP-18S5
HYP-18S8
HYP-25S5
HYP-25S8
HYP-25S12
HYP-30S10
HYP-30S15
HYP-40S20
Output
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
M12
5mm
8mm
5mm
8mm
12mm
10mm
15mm
20mm
S25
2mm
4mm
5mm
8mm
10mm
15mm
M18
Non-shielded
Non-shielded
M30
S18
S30
S40
Suffix code
HYP-12R2N□-CR
HYP-12R2P□-CR
HYP-12R4N□-CR
HYP-12R4P□-CR
HYP-18R5N□-CR / HYP-18RL5N□-CR
HYP-18R5P□-CR / HYP-18RL5P□-CR
HYP-18R8N□-CR/ HYP-18RL8N□-CR
HYP-18R8P□-CR/ HYP-18RL8P□-CR
HYP-30R10N□-CR
HYP-30R10P□-CR
HYP-30R15N□-CR
HYP-30R15P□-CR

12. 221
DC Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
HYP-40S20□□
20mm±10%
0~16mm
Steel 50×50×1
250Hz
HYP-30S15□□
15mm±10%
0~12mm
Steel 45×45×1
100Hz
HYP-25S12□□
12mm±10%
0~9.6mm
Steel 35×35×1
200Hz
HYP-30S10□□
10mm±10%
0~8mm
Steel 30×30×1
250Hz
HYP-18S5□□□
HYP-25S5□□
5mm±10%
0~4mm
Steel 18×18×1
Steel 25×25×1
500Hz
350Hz
HYP-18S8□□□
HYP-25S8□□
8mm±10%
0~6.4mm
Steel 25×25×1
Steel 30×30×1
300Hz
250Hz
■ Square type
MODEL
Sensing distance
Mounting distance
Object
Switching frequency
Output current
Power
Residual voltage
Power consumption
Leakage current
Insulation resistance
Dielectric strength
Ambient temperature
Degree of protection
Protection circuit
Operation lamp
Vibration
Shock
Material
Max. 200㎃
DC 12~24V (DC10~30V)
1.5V Max.
DC 10㎃ Max.(DC 12V)
DC 0.5㎃ Max.
50㏁ Min. at DC 500V
AC 1000V for 1 Minute
-25℃~70℃
IP 67(IEC)
Surge protection / Reverse polarity protection
RED (LED)
10~55㎐ Double amplitude 1.5㎜ X.Y.Z each direction for 2 hours
500m/s²(Approx. 50G) X.Y.Z each direction for 3 times
Case : ABS Resin, Face :ABS Resin
15mm±10%
0~12mm
Steel 45×45×1
100Hz
10mm±10%
0~8mm
Steel 30×30×1
250Hz
8mm±10%
0~6.4mm
Steel 25×25×1
200Hz
5mm±10%
0~4mm
Steel 18×18×1
350Hz
4mm±10%
0~3.2mm
Steel 12×12×1
400Hz
2mm±10%
0~1.6mm
Steel 12×12×1
800Hz
Max. 200㎃
DC 12~24V (DC10~30V)
1.5V Max.
DC 10㎃ Max. (12VDC)
50㏁ Min. at DC 500V
AC 1000V for 1 Minute
-25℃~70℃
IP 67(IEC)
Surge protection / Reverse polarity protection
RED(LED)
10~55㎐ Double amplitude 1.5㎜ X.Y.Z each direction for 2 hours
500m/s²(Approx. 50G) X.Y.Z each direction for 3 times
Case : Brass, Face : ABS Resin
HYP-12R2□□
HYP-12R2□□-CR
HYP-12R4□□
HYP-12R4□□-CR
HYP-30R10□□
HYP-30R10□□-CR
HYP-30R15□□
HYP-30R15□□-CR
HYP-18R5□□
HYP-18RL5□□
HYP-18R5□□-CR
HYP-18RL5□□-CR
HYP-18R8□□
HYP-18RL8□□
HYP-18R8□□-CR
HYP-18RL8□□-CR
Case: Stainless, Face:ABS Resin
■ Round type / Round Relay Connector type
Sensing distance
Mounting distance
Object
Switching frequency
Output current
Power
Residual voltage
Power consumption
Insulation resistance
Dielectric strength
Ambient temperature
Degree of protection
Protection circuit
Operation lamp
Vibration
Shock
Material
MODEL
■ Specification

13. Connection
Series and Parallel Connections Data
＜NPN Output＞ ＜PNP Output＞
＜PNP Output＞
DC 10~30V
Load
+
-
DC 10~30V
+
-
Load
DC 10~30V
+
-
Load
＜NPN Output＞
DC 10~30V
+
-
Load
-20 -15 -10 -5 0 5 10 15 20
2
4
8
10
12
6
14
16
mm
12R2N
12R4N
30R10N
30R15N
18R8N
18R5N
HYP-12R
HYP-18R
HYP-30R
mm
mm
20 mm0 5 10 15-20 -15 -10 -5
2
4
8
10
12
6
14
16
18
20 40S20N
30S15N
30S10N
25S8N
18S5N
HYP-18S
HYP-30S
HYP-40S
HYP-25S
<Round type> <Square type>
DC 10 ~ 30V
Sensor
Power+(Brown)
Power-(Blue)
Output(Black)
+
-
Load
Sensor
Power+(Brown)
Power-(Blue)
Output(Black)
DC 10 ~ 30V
+
-
Load
Series Connection DC output
Parallel Connection
＜NPN OUTPUT＞ ＜PNP output＞
222
DC Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14

14. 223
DC Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
Dimensions
HYP-18S
HYP-25S
HYP-30S
HYP-40S
20
31
18 14
0.5
35.7 13
1.8
18
21
35.5
25
18.5
0.5
39 13
1.8
25
39
48.5
30
21.5
0.5
53 18
1.8
30
36
46
40
30
1.2
53 18
2.0
40
(M3-BOLT)
11 0.1+
(M4-BOLT)
(M4-BOLT)
(M5-BOLT)
2- 4.0
cord 2000
18
5.7
7.5
3.5
18 11 0.2+
-
32
4.5
2-M3
10
8.5
1.2
18
6.5
12
4.3
25 18 0.2+
-
32
3.5
2-M4
12
10
2.3
20
7
16
4
30 22 0.2+-
33.5
3.5
2-M4
15
13.5
2.3
17.5
9
22
5.5
40 30 0.2+-
35
6.5
2-M5
24
15.5
2
HYP-18S HYP-25S HYP-30S HYP-40S
Square type
Model Mounting hole Dimensions
cord 2000
cord 2000
cord 2000
(unit:㎜)
(unit:㎜)
Square type bracket
2- 3.2
18±0.2
2- 4.5
22±0.2
2- 5.5
30±0.2
2・φ3.2
2・φ4.0
2・φ4.5
2・φ5.5

15. 224
DC Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ Dimensions
■ Round type
HYP-12R
HYP-18R
HYP-30R
47
29
18
2000
40
4
57
38
30
5
2000
50
80
62
18
2000
73.5
4
M18
24
29.5 47
19
18
2000
40
4
M18
24
29.5
M30
36
43
57
28
30
5
2000
50
M30
36
43
M18
24
29.5
80
52
18
2000
73.5
4
M18
24
29.5
M12
17
20.5 43
32
12
4
2000
M12
17
20.5
43
25.3
12
4
2000
Shielded sensor Non-Shielded sensor
Mounting hole Dimensions Mounting hole Diemensions
Model
(unit:㎜)
■ Relay Connector type
287a 13 28
M12X1
✽ a (lenght) is the same as Round type.
HYP-18RL

16. Surge and Reverse
Polarity Protection!
•Wide range of power :AC 90~250V
•Maximum control output is 200㎃
•2 wire connection same as limit switch
■ Type
5mm
8mm
10mm
15mm
20mm
HYP-25S5
HYP-25S8
HYP-30S10
HYP-30S15
HYP-40S20
M18
5mm
8mm
10mm
15mm
HYP-18RL5
HYP-18RL8
HYP-30R10
HYP-30R15
AC switching
NO, NC
AC switching
NO, NC
AC switching
NO, NC
■ Square type
■ Round Connector type
■ Round type
AC switching
NO, NC
AC switching
NO, NC
(Shielded)
(Shielded)
(Non-Shielded)
(Non-Shielded)
M30
M18
5mm
8mm
10mm
15mm
HYP-18RL5 -CR
HYP-18RL8 -CR
HYP-30R10 -CR
HYP-30R15 -CR
AC switching
NO, NC
AC switching
NO, NC
(Shielded)
(Shielded)
(Non-Shielded)
(Non-Shielded)
M30
S25
S30
S40
Appearance Sensing distance Output Suffix code
Appearance Sensing distance Output Suffix code
Appearance Sensing distance Output Suffix code
225
AC Switching Proximity Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14

17. 226
AC Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
■ Specification
■ Data
20mm±10%
0~16mm
Steel 60×60×1
8mm±10%
0~6.4mm
Steel 25×25×1
Steel 30×30×1
10mm±10%
0~8mm
Steel 30×30×1
Steel 40×40×1
5mm±10%
0~4mm
Steel 18×18×1
Steel 25×25×1
15mm±10%
0~12mm
Steel 45×45×1
Steel 50×50×1
HYP-18RL5A□
HYP-18RL5A□-CR
HYP-25S5A□
HYP-18RL8A□
HYP-18RL8A□-CR
HYP-25S8A□
HYP-30R10A□
HYP-30R10A□-CR
HYP-30S10A□
HYP-30R15A□
HYP-30R15A□-CR
HYP-30S15A□
HYP-40S20A□
mm
mm0 5 10 15-15 -10 -5
5
8
10
12
15
30R15A
30R10A
18L8A
HYP-18RL
HYP-30R
18L5A
mm
mm0 5 10 15-15 -10 -5
4
6
8
10
12
40S20A
30S15A
30S10A
HYP-30S
HYP-40S
20-20
16
18
20
14
HYP-25S
<Round type> <square Type>
● AC output
Model
Sensing distance
Mounting distance
Object
Switching frequency
Output current
Power
Residual voltage
Leakage current
Insulation resistance
Dielectric strength
Ambient temperature
Degree of protection
Protection circuit
Operation lamp
Vibration
Shock
Material
20㎐
Max. AC 200㎃
AC100~240V(AC:90~25V)
AC 10V Max.
AC 2..5㎃ Max.
50㏁ Min. at DC 500V
AC 2000V for 1 Minute
-25℃~70℃
IP 67(IEC)
Surge protection
RED(LED)
10~55㎐ Double amplitude 1.5㎜ X.Y.Z each direction for 2 hours
500m/s²(Approx. 50G) X.Y.Z each direction for 3 times
HYP-18RL,30R TYPE Case: Brass Face: ABS Resin
HYP-25S,30S,40S TYPE Case·Face: ABS Resin

18. 227
AC Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
HYP-25S
HYP-30S
HYP-40S
34.1
46.3
25
18.5
0.5
50 13
1.8
25
39
48.5
30
21.5
0.5
53 18
1.8
30
36
46
40
30
1.2
53 18
2.0
40
(M4-BOLT)
(M4-BOLT)
(M5-BOLT)
HYP-30R
HYP-18RL
57
38
30
5
2000
50
80
62
18
2000
73.5
4
M30
36
43
57
28
30
5
2000
50
M30
36
43
M18
24
29.5 80
52
18
2000
73.5
4
M18
24
29.5
square Type
Round type
(unit:㎜)
(unit:㎜)
cord 2000
cord 2000
cord 2000
Model
Shielded sensor Non-Shielded sensor
Mounting hole Dimensions Mounting hole Diemensions
2- 5.5
30±0.2
22±0.2
2- 4.5
2- 4.2
18±0.2
2・φ4.2
2・φ4.5
2・φ5.5
Dimensions
Model Mounting hole Dimensions

19. 228
AC Sensor(HYP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
Relay Connector type
Square Type bracket
18
6.5
12
4.3
25 18 0.2+
-
32
3.5
2-M4
12
10
2.3
20
7
16
4
30 22 0.2+-
33.5
3.5
2-M4
15
13.5
2.3
17.5
9
22
5.5
40 30 0.2+-
35
6.5
2-M5
24
15.5
2
HYP-25S HYP-30S HYP-40S
(unit:㎜)
287a 13 28
M12X1
✽ a(length) is the same as Round type.

20. 229
Capacitive Proximity Sensor(HCP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
React to a solid,
liquid or granular target !
•Power supply of AC 90~250V and 10~30V in respect of
AC switching and DC switching respectively.
•Maximum control output is 200㎃.
•Sensitivity adjustment
•Display lamp
■ Type
■ DC Switching Round type
■ DC Switching Relay Connector type
M 18
M30
M 18
M30
HCP-18R8NA
HCP-18R8NC
HCP-18R8PA
HCP-18R8PC
HCP-30R15NA
HCP-30R15NC
HCP-30R15PA
HCP-30R15PC
HCP-18RP8NA
HCP-18RP8NC
HCP-18RP8PA
HCP-18RP8PC
HCP-30RP15NA
HCP-30RP15NC
HCP-30RP15PA
HCP-30RP15PC
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
(Case-brass)
(Case-ABS)
(Case-ABS)
Appearance Sensing distance Output Suffix code
(Case-brass)
8mm
15mm
8mm
15mm
8mm
15mmM30
M 18
HCP-18R8NA-CR
HCP-18R8NC-CR
HCP-18R8PA-CR
HCP-18R8PC-CR
HCP-30R15NA-CR
HCP-30R15NC-CR
HCP-30R15PA-CR
HCP-30R15PC-CR
(Case-brass)
(Case-brass)
NPN
PNP
NPN
PNP
NO
NC
NO
NC
NO
NC
NO
NC
Appearance Sensing distance Output Suffix code

21. 230
PROXIMITY SENSOR(HCP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
Appearance Sensing distance Output Suffix code
8mm
15mmM30
M 18
HCP-18RP8NA-CR
HCP-18RP8NC-CR
HCP-18RP8PA-CR
HCP-18RP8PC-CR
HCP-30RP15NA-CR
HCP-30RP15NC-CR
HCP-30RP15PA-CR
HCP-30RP15PC-CR
(Case-ABS)
(Case-ABS)
NPN
PNP
NPN
PNP
NO
NC
NO
NC
NO
NC
NO
NC
■ DC Switching Round type
■ AC switching Round Connector type
Appearance Sensing distance Output Suffix code
M 18 8mm
15mmM30
M 18
M30
8mm
15mm
HCP-18R8AA
HCP-18R8AC
HCP-30R15AA
HCP-30R15AC
HCP-18RP8AA
HCP-18RP8AC
HCP-30RP15AA
HCP-30RP15AC
NO
NC
NO
NC
NO
NC
NO
NC
(Case-brass)
(Case-brass)
(Case-ABS)
(Case-ABS)
8mm
15mmM30
M 18
M 18
M30
8mm
15mm
HCP-18R8AA-CR
HCP-18R8AC-CR
HCP-30R15AA-CR
HCP-30R15AC-CR
HCP-18RP8AA-CR
HCP-18RP8AC-CR
HCP-30RP15AA-CR
HCP-30RP15AC-CR
NO
NC
NO
NC
NO
NC
NO
NC
(Case-ABS)
(Case-brass)
(Case-brass)
(Case-ABS)

22. 231
PROXIMITY SENSOR(HCP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14
HCP-18R8□□
HCP-18RP8□□
HCP-18R8□□-CR
HCP-18RP8□□-CR
HCP-30R15□□
HCP-30RP15□□
HCP-30R15□□-CR
HCP-30RP15□□-CR
Sensing distance
Object
Switching frequency
Output current
Power
Residual voltage
Power consumption
Insulation resistance
Dielectric strength
Ambient temperature
Degree of protection
Protection circuit
Operation lamp
Vibration
Shock
Material
Model
8㎜±10% (Mounting distance:0~5.6㎜) 15㎜±10% (Mounting distance:0~10.5㎜)
Fixed steel 50×50×1㎜
50㎐
Max. DC 200㎃ (Resistive load)
DC 12~24V (DC10~30V)
DC 1.5V Max.
DC 15㎃ Max.
50㏁ Min. at DC 500V
AC 1500V (50/60㎐ for 1 Minute)
-25℃~70℃
IP 65 (IEC)
Surge protection / Reverse polarity protection
RED (LED)
10~55㎐ Double amplitude 1.5㎜ X.Y.Z each direction for 2 hours
500m/s²(Approx. 50G) X.Y.Z each direction for 3 times
HCP-□□R□□ → Case : Brass, Face: ABS Resin
HCP-□□RP□□ → Case·Face : ABS Resin
HCP-18R8□□
HCP-18RP8□□-CR
HCP-30R15□□
HCP-30RP15□□-CR
Model
Sensing distance
Object
Switching frequency
Output current
Power
Residual voltage
Power consumption
Insulation resistance
Dielectric strength
Ambient temperature
Degree of protection
Protection circuit
Operation lamp
Vibration
Shock
Material
8㎜±10% (Mounting distance:0~5.6㎜) 15㎜±10% (Mounting distance:0~10.5㎜)
Fixed steel 50×50×1㎜
20㎐
Max. AC 200㎃ (Resistive load)
AC 100~220V (AC90~250V)
AC 20V Max.
AC 2.2㎃ Max. (OFF state)
50㏁ Min. at DC 500V
AC 2000V (50/60㎐ for 1 Minute)
-25℃~70℃
IP 65 (IEC)
Surge protection
RED (LED)
10~55㎐ Double amplitude 1.5㎜ X.Y.Z each direction for 2 hours
500m/s²(Approx. 50G) X.Y.Z each direction for 3 times
HCP-□□R□□ → Case : Brass, Face : ABS Resin
HCP-□□RP□□ → Case·Face : ABS Resin
■ DC switching type
■ AC switching type
■ Specification

23. ■ Dimensions
■ Precautions
HCP-18R HCP-30R
HCP-30RP
A
B
d
mC
n
A
48
90
B
54
90
C
10
10
m
24
45
n
54
90
3. Ground
Sensing distance may be influenced by sensor grounding
or object grounding.
Model Mounting hole Dimensions Model Mounting hole Dimensions
(unit:㎜)
HCP-18R8
HCP-18RP8
HCP-30R15
HCP-30RP15
24
29
24
75
74.5
10
6
2000
52
75
74.5
62
4415
6
2000
36
41
36
73.5
73
10
8
50.5
2000
73.5
73
60.5
4710.5
8
2000
HCP-18RP
1. Sensitivity adjustment
The ability to change a sensor’s responsiveness to
different materials. VR is situated on the back side.
Turn the VR clockwise for short sensing distance and turn
the VR counter clockwise for long sensing distance.
2. Installation
Ød
54
90
232
PROXIMITY SENSOR(HCP Series)
PROXIMITY SENSOR
PROXIMITYSENSOR
14

24. 233
Applications
PROXIMITY SENSOR
PROXIMITYSENSOR
14
Liquid level detection Material detection in hopper
Level control of hopper Bottle and Liquid level detection
close
controller
open
controller
SW1 bottle cap detection
SW2 bottle content detection
controller
sheet coll
table
material
press
controller
arm
Tank
nonmetal
controller
controller
forming
lower limit
hopper
(D)(C)(B)(A)
controller
hopper bottle cap
detection
(2) liquid level detection
(1) counting
■ Inductive Proximity Sensor
■ Capacitive Proximity Sensor
Valve switching control Robot arm position control
Bottle cap detection Press material detection