2. If you have a ball mouse then you'll need to
take out the ball and get rid of the hair and
dust that’s inside
Doing this gets rid of some of the jerky pointer
business
3. If you have spilt something on your keyboard you
need to tern off your computer IMMEDIATELY
Then use a can of air to blow away the liquid but a
tooth brush helps get the dried residue
4. Unprotected cables are not a good thing
First you could trip over the wires and that’s never
fun
Next you could spill something and short circuit
your computer.
5. Turn off then unplug your printer(laser)
Then remove the paper and cartridge
Clean toner
Remove fragments of paper
Wipe up toner and dust
6. At some point in time you may need to
upgrade or replace hardware
Power could deal with RAM
7. When a laser is involved the number 1 rule is
don’t look directly at the laser or have your eye
near it most cases it'll blind you
When cleaning it don’t touch it
8. On your computer there is a bin called recycle
if you click it will tell you what's in it
Deleting this trash will give you more space to
be used.
