1. W ireless hooter MD-204R
user manual
1. Introduction
The MD-204R siren is designed for indoor use. It is
powered from its ownAC adapter and has a built in antenna
back up battery. The siren communicateswirelessly
with the control panel (two way communication),
magnetic contact, panic button and keyfob. In
addition to signaling alarms, it can also provide
arming and disarming chirps. The siren makes regu-
lar auto testing and reports its condition regularly
to the system for full supervision. Only one MD-20
4R siren can be used with a control panel. high power siren
2.figure
1.Disassembly steps: 2 . mount the base :
A .press the case and rotate the base to remove the front case high2.4~4.8m
Su rface mou ntin g
（option al）
A . Mark and dril l
on the wall
B . Fix t he the base
with crews。
3.Function and operation
When power on, thee LED will start wink nonregularly.If it turn on and off regularly, it can be the
result of a weak radio signal ( long distance, interference etc.).
1.Enrolling 2.Delete the enrolled devices
Pressing SAVE b utton, trigger the Pr essin g both SAVE and C LR button,
devices inten ded to enroll, when the LED wi ll turn off after ligh ting on
there is an alarm sound outp ut, se veral seconds, an d light on aga in.
operate suc cessfully. Th is siren Now release bot h SAVE and CLR b u-
can enroll m ax 60 wireless devic- tto n, to delete al l enrolled devices.
es, including con trol panel , det ec
tors and keyfobs.
SAVE SAVE CLR
-1-

2. 3.Communication with control panel
After enrolled to the control panel, then it
can work with it. When there is an alarm,
the control panel will trigger the siren and
hooting for 2 minutes.In addition to sign- 4.Communication with wireless detectors
aling alarms, it can also provide arming
and disarming chirps. This siren c an communication wi th
dete ctors witho ut control panel. When
the detector give an alarm signal to the siren,
it will hooter for 2 minutes. You can close
the hooting by keyfob. When there is ta-
mper with the detector, the siren will sound
intermittently.
4.Communication with keyfob
The siren can communicate with keyfob without control panel. Click RISK button on the keyfob, you
can stop the hooting. Click HELP button you can trigger the siren(hooting 2 minutes). Click UNLOCK
button, the siren will give a sound, then enter close state. Click LOCK button, the siren will give a
sounds, then enter open state.
4.Specifications
siren piezo electric: 115dB working frequency:433 MHz
working range: up to 100m (open area) power: 15V DC
back up battery: 7.2V, 1.0 Ah (included) stable current:8mA
alarm current:=500mA working range: up to 100m (open area)
working environment: indoor use, -10 to +40°
5. Miscellaneous Comments
1. The siren mounting location should not be easily accessible.
2. Select a proper mounting location with good communication and easy for power supply.
3. Study the system installation manual to learn how to enroll wireless items.
4. When enrolled to the control panel, the siren will confirm enrollment with a short sound signal
Warning : the control panel must be in the programming or user mode before any changes are made
with the siren. Any unauthorized changes will trigger an alarm.The manufacturer has no liability for
consequences caused by incorrect installation or improper use of the siren.
Note: Dispose of batteries safely depending on the
type of the batteries and local regulation.
Although this product does not contain any
harmful materials we suggest you to return
the product to the dealer or directly to the
producer after usage.
-2-