1.
CHAPTER TEST IN TLE 7 PART I
ELECTRICAL INSTALLATION & MAINTENANCE
2020-2021
Name:_____________________________________ Grade & Section: _____________________________
Choose the letter of the correct answer. Write the letter on the space before the number.
1. John Lloyd and his family experience a block-out. He found out that the wiring connections of their house has
short-circuited. Thus, their ____ automatically cut off the current in the circuit. Which of the following serve as
the protective device that automatically cut off the current when the short circuit occurred.
a. Junction box b. Utility box c. Circuit breaker d. Switch
2. Janna cannot reach the tight space on the parts of the television that he is repairing so he used this type of pliers
to cut and hold the fine wires of the TV.
a. Combination pliers b. Long-nose pliers c. Side-cutting pliers d. Cutter
3. Peter wants to hang the wire in a higher place, out of reach of children, to be safe. So he makes holes on the
walls, where he will hang it using the ______.
a. Portable electric drill b. Electrician’s knife c. Pliers d. Screw Drivers
4. Vince is cleaning the parts of a computer desktop, he noticed that there are some hexagonal slot head screws
used on the back cover of the computer desktop. Which of the following tool should he used to drive the screw
with hexagonal slot head?
a. Philip Screwdriver b. Stubby Screwdriver c. Flat Screwdriver d. Allen Screwdriver
5. Gabriel fill-up the ________ form. Wherein all the raw materials, work-in-process goods and completely finished
goods that are considered to be the portion of a business's assets that are ready or will be ready for sale, are all
written. What form does Gabriel filled-up?
a. Inventory Form b. Requisition Form c. Job orders Form d. Borrower’s Form
6. Edward use this form to request for tools and equipment to be used in his job. What type of form is this?
a. Inventory Form b. Requisition Form c. Job orders Form d. Borrower’s Form
7. Freddie indicates in this form the department that he is connected, the date, the job that is to be done, who is the
person to approve the request, when the tools was returned and if it was in good condition. What is this form?
a. Inventory Form b. Requisition Form c. Job orders Form d. Borrower’s Form
8. Cedrick is a new employee he received a form with a written instruction to perform a work according to a
specified requirement, within specified time frame and cost estimates. What form does Cedrick received?
a. Inventory Form b. Requisition Form c. Job orders Form d. Borrower’s Form
9. If you are ask to measure the amount of electrical current intensity in a circuit, what measuring tool will you use?
a. Voltmeter b. Ammeter c. Micrometer d. Ohmmeter
10. You used this pocket sized tool to test the line wire or circuit if there is current in it. What is it?
a. Test light b. Wire gauge c. Clamp Ammeter d. Pull-push rule
11. Which is used to measure the voltage, resistance and current of a circuit? It connected in parallel or series with
the circuit depending on what to measure.
a. Volt-Ohm-meter b. Micrometer c. Ohmmeter d. Ammeter
12. What measuring tool is used to measure the length of an object in centimeter and inches?
a. Test light b. Wire gauge c. Clamp Ammeter d. Pull-push rule
13. James wants to measure the diameter of the wire that he will be using for his project. Which of the following is
used to determine the sizes of the wire or conductor?
a. Test light b. Wire gauge c. Clamp Ammeter d. Pull-push rule
14. Vince were asked by his teacher to measure the convenience outlet that they will be using. Which of the following
tools is used to measure length, width and thickness of short flat object and in sketching straight lines.
a. Test light b. Ammeter c. Voltmeter d. Ruler
15. Andrea wants to measure the electrical pressure or voltage of a circuit. Which of the following is the tool that she
will be using?
a. Voltmeter b. Volt-Ohm-meter c. Clamp Ammeter d. Ammeter
Prepared by:
CINDY I. HEMBRADOR
TLE Teacher