FONA LASER- THE LASER TO GO FOR FONA Laser combines intuitive use with fantastic value for money. So you won’t have to think twice about launching laser dentistry in your practice. Take the next step today. Ask your dental dealer about FONA Laser. FONALaser control unit including handpiece with integrated finger switch and cable with optical fibre/wire 01 Fibres 200μ 01 Fibres 320μ 03 Glasses(green PC Filter) 03(1 for Patient & 2 for Dentist & Assistant) Fibre Cutter 01 Single-use tips (including one bending tool) 01 Set of 50 tips Preinstalled complete FONALaser software including 12 x preset program possibility Technical Data Technical Data FONALaser empty General empty empty Beam guide: Flexible quartz glass fiber Display: Full color, graphical LCD touch screen Cooling: Internal air cooling controlled by output Temperature switch: Software temperature switch at 48° C Door contact connection: Potential-free contact 5 VDC/20 mA (TTL) Dimensions (W x L x H): 182 x 197 x 189 mm Weight: approx. 1000 g incl. handpiece Laser type: Diode laser Wavelength: 970 nm ± 15 nm Laser system: Class IV (according to IEC 60825-1) Device classification: Class IIb (according to Council Directive 93/42/EEC) Optical power: approx. 0.5 - 4.0 W (CW) Optical peak power: approx. 7 W (diode) Emission modes: CW (continuous wave), chopped 1 Hz to 100 Hz, peak-pulse approx. 1.5 kHz - 20 kHz Pulse: repeated pulse Pulse duration: Chopped mode: 5 ms - 0.5 sec. Peak-pulse: 23 μs fixed IP degree of protection: Laser unit: IP20 Aiming beam: 635 or 650 nm, max. 1 mW NOHD: From the distal end of the optical fiber: 1.5 m Optical fiber thickness: 200 and 320 μm, NA >= 0.22 Operation: Finger switch, with electronic access key Nominal power input: 12 V DC 5.25 A max. 63 VA MPU63-105 or 15 V DC 6.66 A max. 100 VA MPU100-106 Insulation class: Class I, type B (according to IEC 60601-1) Adapter: External, 100 - 240 VAC, 50 - 60 Hz Power supply: The FONALaser may only be operated with the Sinpro MPU63-105 or Sinpro MPU100-106 power supply.