The Guide Right Surgical Guide System is a system of components for the fabrication and correction of diagnostic and surgical dental implant guides in 1 or 2 dimensions.
20. SURGICAL guide with 5.3 guide sleeve is placed over IRT
Set on a firm surface and tapped with downward pressure
to remove inserts.
21. 5.3 wide guide sleeve is used with appropriate inserts for drill sizes.
Shown here with 4 mm insert
22. SURGICAL guide in place
Appropriate inserts are used for each drill size
2.0 mm insert, for 1.8 mm drill ■ 2.7 mm insert for 2.5 mm drill …etc.
Completing the osteotomy with Astra 3.8 mm twist drill
plus 5.0 mm conical drill used in 5.3 mm sleeve without an insert.
25. Guide Right™
Products shown in this case
3/32” drill
5.3 Wide Guide Sleeve
Series of Inserts for 5.3 Guide Sleeve *next slide
5.3 Fabrication Insert (FABIN)
3 mm Guide Post
Guide Sleeve Inserts for 5.3 Guide sleeve
Insert Removal Tool (IRT)
Petroleum Jelly
Triad® Gel
Recommended Kits: 4.5 / 5.3 Serial Guide Kit
1.800.314.0065 • www.deplaque.com
26. Serial INSERTS for 5.3 Guide Sleeves
Guide Right™
Individual Insert Sizes Available
2.25 mm
2.6 mm
2.75 mm
3.0 mm
3.6 mm
4.0 mm
4.2 mm
4.6 mm
Order directly from > www.deplaque.com
27. Serial INSERTS for 4.5 Guide Sleeves
Guide Right™
Fabrication Insert
INSERTS FOR 4.5 Guide Sleeve FABIN
Insert Removal Tool
Order directly from > www.deplaque.com
28. DéPlaque
Guide Right™ Surgical Guide System
fabricate ▪ evaluate ▪ correct ▪ verify ▪ place
Start With Precision. Place With Confidence.™
1.800.314.0065 • www.deplaque.com