We offer only the best in forklifts and forklift parts, including brand names such as Yale, Hyster, Clark, Toyota, Allis Chalmers and more.for more info visit us:http://bit.ly/2emtcSY

1. Forklift Safety Parts Are For All-Around Protection
If you think of how serious accidents can happen even when you're riding a
bicycle, you'll understand why forklift safety parts are necessary. Forklift safety
parts are intended to protect the truck operator, other people in the work area
and, of course, the truck itself. Forklift safety components and safety techniques
are meant to provide protection in all directions: above the ground, on the
ground, in front of the truck, behind it and all around. Safety concerns apply to
Toyota and Yale trucks, Mitsubishi, Clark or Hyster forklifts, or any brand, type
and model.
The safety of the forklift driver starts with proper training and accreditation. Only
duly-licensed drivers are allowed to operate a forklift to ensure that neither they
nor anyone else is injured. Cab enclosures provide the shell protecting the driver.
For sit-down trucks, the seats must have tip-over restraints to protect the driver
in case of a tip-over. Safety belts and full-body harnesses provide fall protection
for the driver. For stand-up trucks, entry bars are provided, with alarms that
sound if the bar is not in place. Overhead guard covers are installed to protect the
driver frommaterials that may fall off elevated loads.

2. Some forklift safety parts have in mind the protection of others in the workplace.
Beacons and strobes, front and tail lights, back-up alarms, horns and mirrors are
meant to prevent others being run over by the truck. Procedures such as not
allowing people to ride on the forks, keeping the forks lowered when not in use
and parking the truck properly are enforced to prevent accidents that might injure
others.
Still other forklift safety parts and procedures are meant for the protection of the
truck itself. Fire extinguishers are mandatory equipment in all trucks. Loads
should be tilted back and carried no more than 6" from the ground. Aisles should
be clear of obstructions properly-marked and no less than 6-feet wide.
Although emission control equipment is not considered among forklift safety
parts, it plays a big role in ensuring the safety of drivers and others in the work
area. Forklifts are often used in enclosed spaces like warehouses and containers.
Faulty emission control equipment can result in exposing all the people in the
area to harmful air pollutants. Defective emission control can also result in
damage to the truck's engine.
Safety practices extend to parts of the other forklift systems as well. When parts
in the engine, hydraulic, ignition, steering and lifting systems do not meet
standards, government regulations specify that the truck must be grounded. The
forklift may not be put back into operation until the defective parts are repaired
or replaced. Familiarity with safety regulations drawn up by government agencies
like the OSHA will help guide forklift operators in instituting comprehensive safety
programs.
Proper inspection and maintenance programs will go a long way towards ensuring
the safety of everyone connected with the operation of a lift truck. By installing
the right forklift safety parts, downtime due to accidents can be reduced or
eliminated and lives of workers safeguarded.