Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
Do-It-Yourself Basement Waterproofing Systems
1. Do-It-Yourself Basement Waterproofing Systems
There are a number of basement waterproofing systems that can be installed in order to stop water from
entering your basement. Some of them are quite simple and there are some that are more complicated, but all
of them will help to keep your basement dry. If you intend to install your own basement waterproofing system,
then you must have knowledge about the materials and methods available for a successful waterproofing
project.
This is one of the most effective basement waterproofing systems and it includes the repair of any cracks or
holes in the basement with the help of hydraulic cement or an epoxy basement patch. Stir the hydraulic cement
thin until you get the consistency similar to that of pancake batter with the intention that it will easily pour into
the cracks. For walls, make use of the epoxy cement patch, which is available in a tube about the size of a
toothpaste tube. The hydraulic cement will expand as it settles and will completely seal the cracks. These
basement waterproofing systems will prevent water leakage through wall cracks and holes and keep your
basement dry.
Another helpful basement waterproofing systems consists of installing 8 or 10 inch perforated pipe, also
known as French drain alongside the footers of the basement wall and conceal it with gravel. These basement
waterproofing systems will prevent the accumulation of water in your basement.
There are other effective basement waterproofing systems that need you to install rain gutters on the
overhangs of the roof of the house. You can add gutter extension pipes to the end of the gutter and bury the
pipe into a flower bed. Dig the flower bed about 24 inches deep and fill the hole with gravel, place the pipe into
the gravel and cover the pipe with 6 inches of gravel and then complete the job with dirt sloped away from the
foundation. These basement waterproofing systems will help to channel away the rainwater from the basement
and ensure proper drainage of the roof water.
Applying a coat of roll-on tar to the exterior of the basement wall and then covering it with a 1 inch firm
insulation which will stick to the tar have also proven to be very effective basement waterproofing systems.
These basement waterproofing systems prevent water penetration and accumulation of moisture. You need to
ensure that the tar covers the wall as well as the joints between the wall and the footer.
For more information on Do It Yourself Home Weatherproofing, including other interesting and informative
articles and photos, please click on this link: Do-It-Yourself Basement Waterproofing Systems