1. ASCELLA
LIQTRO ASCELLA is a water-miscible metal LIQTRO ASCELLA adalah pelumas pengerjaan
working fluid, which produces a superior quality logam yang menghasilkan emulsi berwarna putih
milky, opaque, emulsion when mixed with water. susu ketika dicampur dengan air. Produk ini tidak
The product which does not contain Phenols or mengandung Phenols atau Sodium Nitirite dan
Sodium Nitrite, can safely be used on a wide range dapat dipakai pada logam ferrous dan logam non-
of ferrous and non ferrous feedstocks. ferrous
The boundary properties afforded by high oil Kandungan minyak yang tinggi memberikan hasil
content provides good machining performance and bubut yang sempurna dan melindungi hasil kerja
a high degree of residual corrosion protection. This dari korosi. Produk ini mengandung biocide untuk
product contains biocide package used to prolongs memperpanjang umur pakai.
service life.
Performance
Application Recommended Treat Rates Oil in Water
General purpose machining ferrous metal General machining low to medium machinability material 5%
General purpose machining non-ferrous metal More difficult machinability material 5%~10%
Water based hydraulic fluid Use as hydraulic fluid 5%
Typical Characteristic
Property: Unit: Method: LIQTRO ASCELLA
Density at 15°C kg/liter ASTM D 4052 0.90
Color ASTM D 1500 4.0
Flash Point (COC) °C ASTM D 92 >120
Viscosity at 40°C cSt ASTM D 445 37
Viscosity at 100°C cSt ASTM D 445 5
PH at 5% 9.3~9.8
Corrosion Test IP287 4%
Emulsion Appearance Off White Milky
Handling / Precautions Penanganan / Peringatan
When handling this product a MAXIMUM Temperatur penyimpanan, sebaiknya dibawah
temperature of 60°C should be observed for 60°C, dan untuk penyimpanan jangka panjang,
storage and unloading. However, it is strongly temperatur dibawah 50°C. Informasi lebih lanjut
recommended that for long term storage the dapat dilihat pada Material Safety Data Sheet.
temperature should not exceed 50°C. For detailed
data please refer to the relevant MSDS.
Informasi Lanjutan
Further Information
Untuk informasi lebih jauh dapat menghubungi staff
For further information please contact SMESSINDO SMESSINDO
affiliate or representative.
The typical characteristic shown in the above are average values based on recent production. Minor variations, which do not affect
performance, are to be expected in normal manufacture.