growth of plants in controlled conditions.

1. EMBEDDED GREEN HOUSE
AUTOMATION SYSTEM.
BY
G.VIJAYA LAKSHMI
G.KIRAN MAI
KARTHIK REDDY
SANDEEP KUMAR

2. What is a green house?
Green houses are used to grow plants in
controlled conditions
These green houses are usually build in
houses with glass or plastic in which
plants will be grown in controlled
conditions

4. AUTOMATED GREEN HOUSE.
 Green houses form an important part of the agriculture and
horticulture sectors of a country.
 They can be used to grow plants under controlled climatic conditions
for optimal solutions.
 Automated green house involves the automatic monitoring and
controlling of climatic parameters which directly or indirectly
govern the plant growth and their production.
 In order to control the climate factors and environment automatically
we require a software.

5. ABOUT THE SOFTWARE:
 The software used here is Keil uversion3.It is an integrated
development equipment that helps you write compile and
debug embedded programs. It encapsulates the following
programs:
 A project manager.
 Tool configuration.
 Editor
 Powerful debugger.

6. OBJECTIVE:
 Build miniature green house which is equipped with automatic
monitoring and controlling system.
 Constantly monitor and control environmental conditions in green
house to ensure it remains at present temperature , light, moisture
and humidity levels.
 It focuses on saving water ,increasing efficiency and reducing the
environmental impacts on plants production.
 The user can see the atmospheric conditions of the green house
plants on website and control the green house from far away places.

7. 8051 MICROCONTROLLER

8. WORKING OF MICRO CONTROLLER:
 DEF:A control device which incorporates a micro processor.
 A microcontroller is a general purpose device, but that is meant to
read data, perform limited calculations on that data and control its
environment based on those calculations.
 The prime use of a microcontroller is to control the operation of a
machine using a fixed program that is stored in ROM and that does
not change over the lifetime of the system.
 8051 micro controller has 40 pins which are having their specific
functioning.

9. EMBEDDED SYSTEMS:
 An embedded system is a system which is going to do a predefined
specified task is the embedded system and is even defined as combination
of both software and hardware.
 A general-purpose definition of embedded systems is that they are devices
used to control, monitor or assist the operation of equipment, machinery or
plant.
 . "Embedded" reflects the fact that they are an integral part of the system.
 The very simplest embedded systems are capable of performing only a
single function or set of functions to meet a single predetermined purpose.

10. LIGHT DEPENDENT RESISTOR:
 A Photoresistor or light-dependent resistor(LDR) or photocell is
a light-controlled variable resistor. The resistance of a
Photoresistor decreases with increasing incident light intensity; in
other words, it exhibits photoconductivity.
 Photoresistors come in many different types. Inexpensive cadmium
sulfide cells can be found in many consumer items such as camera
light meters, street lights, clock radios, alarms, and outdoor clocks.
 They are also used in some dynamic compressors together with a
small incandescent lamp or light emitting diode to control gain
reduction.
 A light dependent resistor is a small, round semiconductor.

12. POWER SUPPLY:
 A power supply is a hardware component that supplies power to an
electrical device.
 receives power from an electrical outlet and converts the current
from AC (alternating current) to DC (direct current).
 An AC source, a transformer, and a bridge rectifier (full diode
bridge) can turn an AC “wall” source into a usable DC source for
low –voltage electronics.
 It also regulates the voltage to eliminate spikes and surges common
in most electrical systems.
 Power supplies are rated in terms of the number of watts they
generate.

13. POWER SUPPLY UNIT:

14. RELAYS:
 A relay is an electrically operated switch.
 These are remote control electrical switches that are controlled by
another switch, such as a horn switch or a computer as in a power
train control module, devices in industries, home based applications.
 Relays allow a small current pin, 4-pin, 5-pin, and 6-pin, single
switch or dual switches.
 Relays are used throughout the automobile. Relays which come in
assorted sizes, ratings, and applications, are used as remote control
switches. A typical vehicle can have 20 relays or more.

16. THERMISTOR:
 A thermistor is a type of resistor whose resistance varies
significantly with temperature, more so than in standard resistors.
The word is a portmanteau of thermal and resistor.

17. LIQUID CRYSTAL DISPLAY(LCD):
 A liquid crystal display (LCD) is a thin, flat display device made up of any
number of color or monochrome pixels arrayed in front of a light source or
reflector.
 LCD (liquid crystal display) is the technology used for displays in notebook and
other smaller computers. Like light-emitting diode (LED) and gas-plasma
technologies, LCDs allow displays to be much thinner than cathode ray tube
(CRT) technology

18. SENSORS:
 In this project sensors play a very important role. here we can use various sensors
like light sensor, temperature sensor, humidity sensor etc.
LIGHT SENSOR:
 A light sensor as its name suggests ,is a device that is used to detect light.

19. SENSORS:
 TEMPERATURE SENSOR: temperature sensor is also called as thermistor.
 Thermistors are thermally sensitive resistors whose prime function is to exhibit a
large, predictable and precise change in electrical resistance when subjected to a
corresponding change in body temperature.

20. SENSORS:
 HUMIDITY SENSOR: Humidity is the presence of water in air. The amount of water
vapor in air can affect human comfort as well as many manufacturing processes in
industries.

21. ADVANTAGES:
 Increase fertility.
 Better productivity.
 Increase in quality of crop.
 Percentage of germination of seeds is high
in green house.

22. FUTURE SCOPE:
 The system which we are discussed above is
implemented on the board and results are shown.
But the system can work more efficiently with
present technology and may improve the existing
technology in the field of wireless communication
and with the wide improvement of GSM
technology which can improve Short Message
Service with the help of embedded technology
anything may become possible and easy.

23. CONCLUSION:
 With the wide improvement of wireless and GSM
technology. The system may be cost with
wireless sensors may little cost but it works with
more effectively. The system may be
implemented with the help of many
technologies but these technologies more
reliable, easy to implement, works effectively
and easy to operate.

25. SAVE PLANTS SAVE YOURSELF  