http://www.ganeshmachinery.com | This PowerPoint presentation covers various aspects of manual & CNC big bore/oil country lathes, including their applications, their components, their dimensions, and their optional features.
3. AMERICAN PETROLEUM INSTITUTE – API
PITCH – 2, 3, 4, 5, 6, 8 and 10
Taper = ¾” per foot
Designed to support the weight of the pipe in the hole
Drill pipe makes up the majority of the drill string back
up to the surface.
4. DRILL PIPEEach drill pipe comprises a
long tubular section with a specified O.D.
O.D. Sizes – 4-1/2”, 5-1/2”, 6-5/8”, 7”, 8-5/8”, 9-5/8”, 10-3/4” and 13-3/8”
Pipe is thread on each end only, no other work is done on the pipe
The bigger the bore – the slower the spindle RPM
Small diameter pipe machined on large bore machines is very inefficient
5. GANESH MACHINES FOR BIG BORE
APPLICATIONSGTW-30 Series
Between Centers – 60” to 160”
Rear Chuck Mount included
6-5/8” Spindle Bore Standard (Optional 10”)
6. GTW-34/38/42 Series
Rear chuck mount included
6-5/8” Spindle Bore Standard (Optional 10.04” & 14.37”) GTD-44 Series
Rear chuck mount is optional
6” Spindle Bore (Actually 152mm which is 5.98” (Optional 9” & 12”)
GTW-5240
Rear chuck mount included
10.04” Spindle Bore Standard (Optional 14.37”)
7. 8-STATION VERTICAL TURRETGreat for threading pipe because
the tool is closer to the centerline
More rigid Less vibration
Heavier cuts
Test Cuts – ¼” depth of cut, 400-SFM, 0.015” per/rev feed, 4140 heat treated material
4-way & 6-way Horizontal Turrets are optional
12-Station Turret optional
8. BORING BAR HOLDER OPTION
3” to 6” Boring Bar Holder
3 x Diameter for high-speed steel bars = length of bar (1.5”
holder on turret can handle 4.5” bar length)
The cross slide mounted holder can handle longer lengths 9” to 18” nominal
Special Device or Carbide Boring Bars can have lengths up to
10 x the diameter
10. POINTS TO WATCH FOR WHEN SELLING A CNC OR MANUAL BIG BORE LATHE
Make sure the spindle bore is large enough for the part
Nominal pipe sizes vary in diameter
6” pipe might not fit in a 6” spindle bore
Make sure the Steady Rest is large enough to support the part
Our 24” steady rest is 600mm (23.64”)
Manual Lathes don’t come with tool holding
T-Slotted, Dorian, Quick-Change Wedge
GTD-30 comes with a 4-way tool post, not a T-Slot
For more information please visit our website at http://www.ganeshmachinery.com.