LV Tech 3D Printing 2013-08-20

•Télécharger en tant que PPTX, PDF•

2 j'aime•1,752 vues

Glenn Adams

Additive Manufacturing Presentation for LV Tech

Technologie Business

(aka 3D Printing)
Additive
Manufacturing
Glenn Adams
gj@gjadams.com

(President Obama talks about 3D printing, starting at 14:54)
http://www.whitehouse.gov/state-of-the-union-2013
http://namii.org/resources/logos/
http://www.putmanplanninganddesign.com/FabLab.html

http://www.clubpenguinsaraapril.com
Educated Consumer
Conversational
Ready to Hack
Ready To Innovate

http://wordlesstech.com/2013/03/19/nanoscale-3d-printed-microstructures/
equal to the diameter of a human hair

http://www.esa.int/Highlights/Lunar_3D_printing

http://inhabitat.com/the-solar-powered-sinter-3d-printer-turns-desert-sand-into-glass/

Type Technologies Materials
Extrusion Fused deposition modeling (FDM)
Thermoplastics (e.g. PLA, ABS), HDPE, eutectic
metals, edible materials
Wire Electron Beam Freeform Fabrication (EBF3) Almost any metal alloy
Granular
Direct metal laser sintering (DMLS) Almost any metal alloy
Electron beam melting (EBM) Titanium alloys
Selective laser melting (SLM)
Titanium alloys, Cobalt Chrome alloys, Stainless
Steels, Aluminium
Selective heat sintering (SHS)[citation needed] Thermoplastic powder
Selective laser sintering (SLS)
Thermoplastics, metal powders, ceramic
powders
Powder bed and inkjet head 3d printing,
Plaster-based 3D printing (PP)
Plaster
Laminated Laminated object manufacturing (LOM) Paper, metal foil, plastic film
Light polymerised
Stereolithography (SLA) photopolymer
Digital Light Processing (DLP) photopolymer
http://en.wikipedia.org/wiki/3D_printing

DMLS
http://www.custompartnet.com/wu/direct-metal-laser-sintering

http://blog.ponoko.com/2012/02/08/3d-printed-lower-jawbone-transplanted-into-an-83-year-old-woman/

http://www.flickr.com/photos/bre/3458247336/
http://reprap.org/wiki/File:Builder.jpg
http://en.wikipedia.org/wiki/File:First_replication.jpg

http://www.youtube.com/watch?v=WoZ2BgPVtA0
Emma was born with
her legs folded up by
her ears, her shoulders
turned in. “She could
only move her thumb”

http://www.thingiverse.com/explore/featured/3d-printing

http://www.repetier.com/documentation/repetier-host/object-placement/

http://meshlab.sourceforge.net/images/screenshots/SnapMeshLab.align2.png

http://www.hotmelt.com/blog/color-glue-sticks-glitter-glue-sticks-a-craftsters-dream

http://en.wikipedia.org/wiki/File:Rapid_prototyping_slicing.jpg

http://www.repetier.com/documentation/repetier-host/gcode-editor/

http://reprap.org/wiki/RAMPS_1.4 http://commons.wikimedia.org/wiki/File:Arduino_Uno_logo.png

http://reprap.org/wiki/Marlin
https://github.com/ErikZalm/Marlin
Marlin 3D Printer Firmware

http://meganlattereviews.wordpress.com/tag/fish-and-chips/

Glenn Adams
Facebook
https://www.facebook.com/glenn.jay.adams
Email
gj@gjadams.com
LinkedIn
http://www.linkedin.com/in/gjadams

Contenu connexe

En vedette

selective laser machining in additive manufacturing

Sashi Kumar Nandyala

The Cost of Manufacturing With vs. Without Lasers

Laser Institute of America

Biomaterials and 3D Printing

Angel Villalpando

Simulations of Thermo-Mechanical Characteristics in Electron Beam Additive Ma...

Ninggang Shen

Thermal Modeling of Electron Beam Additive Manufacturing Process–Powder Sinte...

Ninggang Shen

Metal Additive Manufacturing Manufacturing

Prizztech

Simulation of Electron Beam Melting With the Lattice Boltzmann Method

Rishi Dua

Workshop 3: 3D Printing State of the Art: Industrial

Rising Media, Inc.

Opportunities in 3D Printing of Metals 2015-2025

Rising Media, Inc.

Selective Laser Melting versus Electron Beam Melting

Carsten Engel

Additive Manufacturing (3-D printing) , Rapid Prototyping

Dr. A.P.J. Abdul Kalam Technical University (APJAKTU)

CSIRO Additive Manufacturing - Aug 14

SME_Engagement

additive manufacturing

santanbharadwaj

Additive manufacturing ppt

Stephin Abraham Sabu

Preheating effects in Electron Beam Additive Manufacturing

Ninggang Shen

En vedette (15)

selective laser machining in additive manufacturing

The Cost of Manufacturing With vs. Without Lasers

Biomaterials and 3D Printing

Simulations of Thermo-Mechanical Characteristics in Electron Beam Additive Ma...

Thermal Modeling of Electron Beam Additive Manufacturing Process–Powder Sinte...

Metal Additive Manufacturing Manufacturing

Simulation of Electron Beam Melting With the Lattice Boltzmann Method

Workshop 3: 3D Printing State of the Art: Industrial

Opportunities in 3D Printing of Metals 2015-2025

Selective Laser Melting versus Electron Beam Melting

Additive Manufacturing (3-D printing) , Rapid Prototyping

CSIRO Additive Manufacturing - Aug 14

additive manufacturing

Additive manufacturing ppt

Preheating effects in Electron Beam Additive Manufacturing

Similaire à LV Tech 3D Printing 2013-08-20

As it is common with disruptive technologies, the advent of 3D printing brought with it a variety of legal challenges, including intellectual property concerns. In 2014, the 3D printing technology is not futuristic sci-fi anymore. Goldman Sachs, in a recent Global Investment Research report entitled The Search for Creative Destruction , included 3D printing in a list of seven technologies that are reshaping the way we live and are reinventing, the notion of what’s possible. This article has two objectives. First, we quickly present how 3D printing works. Second, we discuss how 3D printing is raising new legal issues as it brings sophisticated manufacturing capabilities into the homes and offices of millions around the world and will become the next industrial revolution.

3D Printing And The Future Of Complex Legal Challenges

Thomas O. Dubuisson

Top 6 Innovations in 3D Printing - 3D Printing Service Toronto

mechsolutions

Bryan So

MecklerMedia

What is 3D Printing? Why is it such a hot product? Why has 3D Printing been on the lips of technologists for years and now it’s on the lips of the general consume? Why is 3D Technology, or additive manufacturing, poised for explosive growth and why is it so important to BDPA? By ‘printing’ and shaping materials such as paper layer upon layer in various geometries, we can now create three-dimensional physical objects at a fraction of the unit cost. This advance in technology has opened the door for numerous applications that are revolutionizing businesses across all industries. Everyday people are also joining in on the fun and coming up with ever more creative uses for 3D printing. Our guest speaker for this month is Jeff Smith, co-founder of high quality 3D printing technology company, Fabricon3D, located in Cincinnati. He is very enthusiastic about technology and how it can be leveraged in a business setting to get the job done faster and better. Jeff is an entrepreneur who has run a successful executive search practice (Smith, Fischer & Associates) since 1998. Learn more about BDPA Cincinnati - http://www.bdpa.org/group/CI

Handout: 'Introduction to 3D Printing' (Jeff Smith)

BDPA Education and Technology Foundation

Portfolio of works

Christopher Seeto

3D Design and Printing

Apostolos Syropoulos

3d printing (3D printer)

MOUMNI1015

3D Printing

Usman Bashir

3D Printing - What's next

paul young cpa, cga

Manufacturing| 3D Printing| What is Next?

paul young cpa, cga

3D Printing Technology

Shafeer Khan

3D Printing is basically a process for making a physical object from a three dimensional computer aided design CAD file via a layering approach. It encompasses many forms of technologies and materials as 3D printing is being used in almost all industries. 3D printers are a new generation of machines that can make pretty much anything from ceramic cups to plastic toys. They have become affordable enough to hit the mainstream. 3D printer can be purchased online or in stores, which gives people the ability to print items from anywhere in the world. Technology is always updating and evolving, and 3D printing is no expectation. This paper provides an overview of 3D printing and its applications. Matthew N. O. Sadiku | Uwakwe C. Chukwu | Abayomi Ajayi-Majebi | Sarhan M. Musa "3D Printing: An Introduction" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-7 , December 2022, URL: https://www.ijtsrd.com/papers/ijtsrd52421.pdf Paper URL: https://www.ijtsrd.com/humanities-and-the-arts/education/52421/3d-printing-an-introduction/matthew-n-o-sadiku

3D Printing An Introduction

ijtsrd

3D Printing| What's New| January 2019

paul young cpa, cga

expo

Joshua Johnston

3D printing (also known as Additive Manufacturing) has attracted a huge amount of interest. Some commentators believe that this technology has the potential to underpin a 'manufacturing revolution'. The truth is more complex and nuanced. 3D printing is not a single technology; it’s current application areas are numerous; and the impact it could have in a variety of sectors is hindered by multiple uncertainties. Researchers at the University of Cambridge and the University of Nottingham have been researching the ways in which 3D printing is changing current business models in a variety of sectors, and exploring the way in which these technologies could have a wider impact. This same team has also been gathering evidence to support the development of a UK national strategy for 3D printing / additive manufacturing. This presentation will provide an overview of the results of this research on 3D printing-enabled business model innovation, and highlight some of the current barriers and opportunities.

Innovation Roundtable: The (actual and potential) impacts of 3D printing on b...

Tim Minshall

3-D Printing_feb_13_2014

James Sutter

The World Economic Forum (WEF) revealed that the 3D printing technology can change the world in ten ways. It can- (a) enable the blind and visually impaired people the chance to see, (b) create body plants e.g. bone implants to limbs, (c) produce lightweight casts for broken bones, (d) ensure faster medical progress, (e) make stronger and safer vehicles, (f) ensure better and cleaner factories by reducing the number of factory workers and waste produced by the industry, (g) ensure faster design and innovation, (h) promise less pollution from shipping, (i) guarantee better education in science, technology, engineering and mathematics as using printers the schools can make subjects more engaging, and (j) enable to make miniaturized devices to guarantee targeted medical treatment. Bangladesh may frame the rule and encourage the use of 3D technology without any legal and procedural intervention.

Fourth revolution through 3 d technology

M S Siddiqui

ABOUT 3D PRINTING: Also called Additive Manufacturing, 3D printing has been hailed as a transformative manufacturing technology, 3D printing involves fabrication of physical objects by depositing a material using a nozzle, print head, or any another printer technology. Though initially used for prototyping of products, 3D printing has evolved and is currently capable of customized short-run manufacturing of industrial products, dental implants, and medical devices. ABOUT THIS TREND REPORT: This report provide information about the 3D Printing trend along with links to additional resources. Table of Contents 1.Introduction to 3D Printing 2.Marketplace Opportunities and Industry Applications 3.Materials & Technologies 4.Vendor Ecosystem 5.Drivers, Challenges, Implications, Trends to Watch 6.Summary / Recommendations 7.Appendix: Resources for further reading & understanding

3D Printing - A 2014 Horizonwatching Trend Summary Report

Bill Chamberlin

Industry oriented mini project on 3d printing technology

Lalith Tushar Mitra Sistla

3D printing is a manufacturing technique that transforms spools of plastic filament into physical objects. It is useful for prototypes and offers significant benefits for small and medium sized production runs. It is quickly becoming a mature manufacturing technology. It continues to grow and increase its market value. Today, more and more companies in different industries are embracing 3D printing technology worldwide. 3D printing has been adopted by students, entrepreneurs, hobbyists, and various industries. This paper provides an overview of 3D printing in business. Matthew N. O. Sadiku | Uwakwe C. Chukwu | Abayomi Ajayi-Majebi | Sarhan M. Musa "3D Printing in Business: An Overview" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-7 , December 2022, URL: https://www.ijtsrd.com/papers/ijtsrd52413.pdf Paper URL: https://www.ijtsrd.com/humanities-and-the-arts/education/52413/3d-printing-in-business-an-overview/matthew-n-o-sadiku

3D Printing in Business An Overview

ijtsrd

Similaire à LV Tech 3D Printing 2013-08-20 (20)

3D Printing And The Future Of Complex Legal Challenges

Top 6 Innovations in 3D Printing - 3D Printing Service Toronto

Bryan So

Handout: 'Introduction to 3D Printing' (Jeff Smith)

Portfolio of works

3D Design and Printing

3d printing (3D printer)

3D Printing

3D Printing - What's next

Manufacturing| 3D Printing| What is Next?

3D Printing Technology

3D Printing An Introduction

3D Printing| What's New| January 2019

expo

Innovation Roundtable: The (actual and potential) impacts of 3D printing on b...

3-D Printing_feb_13_2014

Fourth revolution through 3 d technology

3D Printing - A 2014 Horizonwatching Trend Summary Report

Industry oriented mini project on 3d printing technology

3D Printing in Business An Overview

Dernier

Scaling API-first – The story of a global engineering organization Ian Reasor, Senior Computer Scientist - Adobe Radu Cotescu, Senior Computer Scientist - Adobe Apidays New York 2024: The API Economy in the AI Era (April 30 & May 1, 2024) ------ Check out our conferences at https://www.apidays.global/ Do you want to sponsor or talk at one of our conferences? https://apidays.typeform.com/to/ILJeAaV8 Learn more on APIscene, the global media made by the community for the community: https://www.apiscene.io Explore the API ecosystem with the API Landscape: https://apilandscape.apiscene.io/

Apidays New York 2024 - Scaling API-first by Ian Reasor and Radu Cotescu, Adobe

apidays

[BuildWithAI] Introduction to Gemini.pdf

Sandro Moreira

ICT role in 21st century education and its challenges

rafiqahmad00786416

Strategies for Landing an Oracle DBA Job as a Fresher

Remote DBA Services

DBX First Quarter 2024 Investor Presentation

Dropbox

Axa Assurance Maroc - Insurer Innovation Award 2024

The Digital Insurer

💉💊+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHABI}}+971581248768 +971581248768 Mtp-Kit (500MG) Prices » Dubai [(+971581248768**)] Abortion Pills For Sale In Dubai, UAE, Mifepristone and Misoprostol Tablets Available In Dubai, UAE CONTACT DR.Maya Whatsapp +971581248768 We Have Abortion Pills / Cytotec Tablets /Mifegest Kit Available in Dubai, Sharjah, Abudhabi, Ajman, Alain, Fujairah, Ras Al Khaimah, Umm Al Quwain, UAE, Buy cytotec in Dubai +971581248768''''Abortion Pills near me DUBAI | ABU DHABI|UAE. Price of Misoprostol, Cytotec” +971581248768' Dr.DEEM ''BUY ABORTION PILLS MIFEGEST KIT, MISOPROTONE, CYTOTEC PILLS IN DUBAI, ABU DHABI,UAE'' Contact me now via What's App…… abortion Pills Cytotec also available Oman Qatar Doha Saudi Arabia Bahrain Above all, Cytotec Abortion Pills are Available In Dubai / UAE, you will be very happy to do abortion in Dubai we are providing cytotec 200mg abortion pill in Dubai, UAE. Medication abortion offers an alternative to Surgical Abortion for women in the early weeks of pregnancy. We only offer abortion pills from 1 week-6 Months. We then advise you to use surgery if its beyond 6 months. Our Abu Dhabi, Ajman, Al Ain, Dubai, Fujairah, Ras Al Khaimah (RAK), Sharjah, Umm Al Quwain (UAQ) United Arab Emirates Abortion Clinic provides the safest and most advanced techniques for providing non-surgical, medical and surgical abortion methods for early through late second trimester, including the Abortion By Pill Procedure (RU 486, Mifeprex, Mifepristone, early options French Abortion Pill), Tamoxifen, Methotrexate and Cytotec (Misoprostol). The Abu Dhabi, United Arab Emirates Abortion Clinic performs Same Day Abortion Procedure using medications that are taken on the first day of the office visit and will cause the abortion to occur generally within 4 to 6 hours (as early as 30 minutes) for patients who are 3 to 12 weeks pregnant. When Mifepristone and Misoprostol are used, 50% of patients complete in 4 to 6 hours; 75% to 80% in 12 hours; and 90% in 24 hours. We use a regimen that allows for completion without the need for surgery 99% of the time. All advanced second trimester and late term pregnancies at our Tampa clinic (17 to 24 weeks or greater) can be completed within 24 hours or less 99% of the time without the need surgery. The procedure is completed with minimal to no complications. Our Women's Health Center located in Abu Dhabi, United Arab Emirates, uses the latest medications for medical abortions (RU-486, Mifeprex, Mifegyne, Mifepristone, early options French abortion pill), Methotrexate and Cytotec (Misoprostol). The safety standards of our Abu Dhabi, United Arab Emirates Abortion Doctors remain unparalleled. They consistently maintain the lowest complication rates throughout the nation. Our Physicians and staff are always available to answer questions and care for women in one of the most difficult times in their lives. The decision to have an abortion at the Abortion Cl

+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...

?#DUbAI#??##{{(☎️+971_581248768%)**%*]'#abortion pills for sale in dubai@

In the thrilling conclusion to 2023, ransomware groups had a banner year, really outdoing themselves in the "make everyone's life miserable" department. LockBit 3.0 took gold in the hacking olympics, followed by the plucky upstarts Clop and ALPHV/BlackCat. Apparently, 48% of organizations were feeling left out and decided to get in on the cyber attack action. Business services won the "most likely to get digitally mugged" award, with education and retail nipping at their heels. Hackers expanded their repertoire beyond boring old encryption to the much more exciting world of extortion. The US, UK and Canada took top honors in the "countries most likely to pay up" category. Bitcoins were the currency of choice for discerning hackers, because who doesn't love untraceable money?

Ransomware_Q4_2023. The report. [EN].pdf

Overkill Security

Effective data discovery is crucial for maintaining compliance and mitigating risks in today's rapidly evolving privacy landscape. However, traditional manual approaches often struggle to keep pace with the growing volume and complexity of data. Join us for an insightful webinar where industry leaders from TrustArc and Privya will share their expertise on leveraging AI-powered solutions to revolutionize data discovery. You'll learn how to: - Effortlessly maintain a comprehensive, up-to-date data inventory - Harness code scanning insights to gain complete visibility into data flows leveraging the advantages of code scanning over DB scanning - Simplify compliance by leveraging Privya's integration with TrustArc - Implement proven strategies to mitigate third-party risks Our panel of experts will discuss real-world case studies and share practical strategies for overcoming common data discovery challenges. They'll also explore the latest trends and innovations in AI-driven data management, and how these technologies can help organizations stay ahead of the curve in an ever-changing privacy landscape.

TrustArc Webinar - Unlock the Power of AI-Driven Data Discovery

TrustArc

The action of the next cyber saga takes place in the mystical lands of the Asia-Pacific region, where the main characters began their digital activities in the middle of 2021 and qualitatively strengthened it in 2022. Corporate espionage, document theft, audio recordings, and data leaks from messaging platforms were all a matter of one day for Dark Pink. Their geographical focus may have started in the Asia-Pacific region, but their ambitions knew no bounds, targeting a European government ministry in a bold move to expand their portfolio. Their victim profile was as diverse as a UN meeting, targeting military organizations, government agencies, and even a religious organization. Because discrimination is not a fashionable agenda. In the world of cybercrime, they serve as a reminder that sometimes the most serious threats come in the most unassuming packages with a pink bow.

Cyberprint. Dark Pink Apt Group [EN].pdf

Overkill Security

Artificial Intelligence Chap.5 : Uncertainty

Khushali Kathiriya

Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows. We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases. This video focuses on the deployment of external web forms using Jotform for Bonterra Impact Management. This solution can be customized to your organization’s needs and deployed to support the common use cases below: - Intake and consent - Assessments - Surveys - Applications - Program registration Interested in deploying web form automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.

Web Form Automation for Bonterra Impact Management (fka Social Solutions Apri...

Jeffrey Haguewood

Join our latest Connector Corner webinar to discover how UiPath Integration Service revolutionizes API-centric automation in a 'Quote to Cash' process—and how that automation empowers businesses to accelerate revenue generation. A comprehensive demo will explore connecting systems, GenAI, and people, through powerful pre-built connectors designed to speed process cycle times. Speakers: James Dickson, Senior Software Engineer Charlie Greenberg, Host, Product Marketing Manager

Connector Corner: Accelerate revenue generation using UiPath API-centric busi...

DianaGray10

Angeliki Cooney has spent over twenty years at the forefront of the life sciences industry, working out of Wynantskill, NY. She is highly regarded for her dedication to advancing the development and accessibility of innovative treatments for chronic diseases, rare disorders, and cancer. Her professional journey has centered on strategic consulting for biopharmaceutical companies, facilitating digital transformation, enhancing omnichannel engagement, and refining strategic commercial practices. Angeliki's innovative contributions include pioneering several software-as-a-service (SaaS) products for the life sciences sector, earning her three patents. As the Senior Vice President of Life Sciences at Avenga, Angeliki orchestrated the firm's strategic entry into the U.S. market. Avenga, a renowned digital engineering and consulting firm, partners with significant entities in the pharmaceutical and biotechnology fields. Her leadership was instrumental in expanding Avenga's client base and establishing its presence in the competitive U.S. market.

Biography Of Angeliki Cooney | Senior Vice President Life Sciences | Albany, ...

Angeliki Cooney

Keynote 2: APIs in 2030: The Risk of Technological Sleepwalk Paolo Malinverno, Growth Advisor - The Business of Technology Apidays New York 2024: The API Economy in the AI Era (April 30 & May 1, 2024) ------ Check out our conferences at https://www.apidays.global/ Do you want to sponsor or talk at one of our conferences? https://apidays.typeform.com/to/ILJeAaV8 Learn more on APIscene, the global media made by the community for the community: https://www.apiscene.io Explore the API ecosystem with the API Landscape: https://apilandscape.apiscene.io/

Apidays New York 2024 - APIs in 2030: The Risk of Technological Sleepwalk by ...

apidays

MINDCTI Revenue Release Quarter One 2024

MIND CTI

💥 You’re lucky! We’ve found two different (lead) developers that are willing to share their valuable lessons learned about using UiPath Document Understanding! Based on recent implementations in appealing use cases at Partou and SPIE. Don’t expect fancy videos or slide decks, but real and practical experiences that will help you with your own implementations. 📕 Topics that will be addressed: • Training the ML-model by humans: do or don't? • Rule-based versus AI extractors • Tips for finding use cases • How to start 👨‍🏫👨‍💻 Speakers: o Dion Morskieft, RPA Product Owner @Partou o Jack Klein-Schiphorst, Automation Developer @Tacstone Technology

DEV meet-up UiPath Document Understanding May 7 2024 Amsterdam

UiPathCommunity

Accelerating FinTech Innovation: Unleashing API Economy and GenAI Vasa Krishnan, Chief Technology Officer - FinResults Apidays New York 2024: The API Economy in the AI Era (April 30 & May 1, 2024) ------ Check out our conferences at https://www.apidays.global/ Do you want to sponsor or talk at one of our conferences? https://apidays.typeform.com/to/ILJeAaV8 Learn more on APIscene, the global media made by the community for the community: https://www.apiscene.io Explore the API ecosystem with the API Landscape: https://apilandscape.apiscene.io/

Apidays New York 2024 - Accelerating FinTech Innovation by Vasa Krishnan, Fin...

apidays

AXA XL - Insurer Innovation Award Americas 2024

The Digital Insurer

Following the popularity of "Cloud Revolution: Exploring the New Wave of Serverless Spatial Data," we're thrilled to announce this much-anticipated encore webinar. In this sequel, we'll dive deeper into the Cloud-Native realm by uncovering practical applications and FME support for these new formats, including COGs, COPC, FlatGeoBuf, GeoParquet, STAC, and ZARR. Building on the foundation laid by industry leaders Michelle Roby of Radiant Earth and Chris Holmes of Planet in the first webinar, this second part offers an in-depth look at the real-world application and behind-the-scenes dynamics of these cutting-edge formats. We will spotlight specific use-cases and workflows, showcasing their efficiency and relevance in practical scenarios. Discover the vast possibilities each format holds, highlighted through detailed discussions and demonstrations. Our expert speakers will dissect the key aspects and provide critical takeaways for effective use, ensuring attendees leave with a thorough understanding of how to apply these formats in their own projects. Elevate your understanding of how FME supports these cutting-edge technologies, enhancing your ability to manage, share, and analyze spatial data. Whether you're building on knowledge from our initial session or are new to the serverless spatial data landscape, this webinar is your gateway to mastering cloud-native formats in your workflows.

Cloud Frontiers: A Deep Dive into Serverless Spatial Data and FME

Safe Software

Dernier (20)

Apidays New York 2024 - Scaling API-first by Ian Reasor and Radu Cotescu, Adobe

[BuildWithAI] Introduction to Gemini.pdf

ICT role in 21st century education and its challenges

Strategies for Landing an Oracle DBA Job as a Fresher

DBX First Quarter 2024 Investor Presentation

Axa Assurance Maroc - Insurer Innovation Award 2024

+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...

Ransomware_Q4_2023. The report. [EN].pdf

TrustArc Webinar - Unlock the Power of AI-Driven Data Discovery

Cyberprint. Dark Pink Apt Group [EN].pdf

Artificial Intelligence Chap.5 : Uncertainty

Web Form Automation for Bonterra Impact Management (fka Social Solutions Apri...

Connector Corner: Accelerate revenue generation using UiPath API-centric busi...

Biography Of Angeliki Cooney | Senior Vice President Life Sciences | Albany, ...

Apidays New York 2024 - APIs in 2030: The Risk of Technological Sleepwalk by ...

MINDCTI Revenue Release Quarter One 2024

DEV meet-up UiPath Document Understanding May 7 2024 Amsterdam

Apidays New York 2024 - Accelerating FinTech Innovation by Vasa Krishnan, Fin...

AXA XL - Insurer Innovation Award Americas 2024

Cloud Frontiers: A Deep Dive into Serverless Spatial Data and FME

LV Tech 3D Printing 2013-08-20

1. (aka 3D Printing) Additive Manufacturing Glenn Adams gj@gjadams.com

2. (President Obama talks about 3D printing, starting at 14:54) http://www.whitehouse.gov/state-of-the-union-2013 http://namii.org/resources/logos/ http://www.putmanplanninganddesign.com/FabLab.html

3. http://www.clubpenguinsaraapril.com Educated Consumer Conversational Ready to Hack Ready To Innovate

4. http://wordlesstech.com/2013/03/19/nanoscale-3d-printed-microstructures/ equal to the diameter of a human hair

6. http://3dprintingindustry.com

7. http://www.esa.int/Highlights/Lunar_3D_printing

8. http://inhabitat.com/the-solar-powered-sinter-3d-printer-turns-desert-sand-into-glass/

9. http://www.contourcrafting.org/

10. Type Technologies Materials Extrusion Fused deposition modeling (FDM) Thermoplastics (e.g. PLA, ABS), HDPE, eutectic metals, edible materials Wire Electron Beam Freeform Fabrication (EBF3) Almost any metal alloy Granular Direct metal laser sintering (DMLS) Almost any metal alloy Electron beam melting (EBM) Titanium alloys Selective laser melting (SLM) Titanium alloys, Cobalt Chrome alloys, Stainless Steels, Aluminium Selective heat sintering (SHS)[citation needed] Thermoplastic powder Selective laser sintering (SLS) Thermoplastics, metal powders, ceramic powders Powder bed and inkjet head 3d printing, Plaster-based 3D printing (PP) Plaster Laminated Laminated object manufacturing (LOM) Paper, metal foil, plastic film Light polymerised Stereolithography (SLA) photopolymer Digital Light Processing (DLP) photopolymer http://en.wikipedia.org/wiki/3D_printing

11. DMLS http://www.custompartnet.com/wu/direct-metal-laser-sintering

12. http://blog.ponoko.com/2012/02/08/3d-printed-lower-jawbone-transplanted-into-an-83-year-old-woman/

13. http://formlabs.com/

14. http://www.flickr.com/photos/bre/3458247336/ http://reprap.org/wiki/File:Builder.jpg http://en.wikipedia.org/wiki/File:First_replication.jpg

15. http://www.youtube.com/watch?v=WoZ2BgPVtA0 Emma was born with her legs folded up by her ears, her shoulders turned in. “She could only move her thumb”

16.

17. http://www.123dapp.com/create

18. http://www.thingiverse.com/explore/featured/3d-printing

19. http://www.repetier.com/documentation/repetier-host/object-placement/

20. http://meshlab.sourceforge.net/images/screenshots/SnapMeshLab.align2.png

21. http://cloud.netfabb.com/

22. http://www.hotmelt.com/blog/color-glue-sticks-glitter-glue-sticks-a-craftsters-dream

23. http://en.wikipedia.org/wiki/File:Rapid_prototyping_slicing.jpg

24. http://www.repetier.com/documentation/repetier-host/gcode-editor/

25. http://reprap.org/wiki/RAMPS_1.4 http://commons.wikimedia.org/wiki/File:Arduino_Uno_logo.png

26. http://reprap.org/wiki/Marlin https://github.com/ErikZalm/Marlin Marlin 3D Printer Firmware

27. http://reprap.org/wiki/CAM_Toolchains