Efficient operation of a furnace is as a result of good maintenance. Despite the kind of furnace you have, there are number of things you can do to keep it in a good condition without having to call a professional. Maintenance will also save you from unnecessary repairs that may be costly. For more info, Visit us at http://cascademechanical.com/.

1. Easy DIY Furnace
Maintenance Tips
 Brought to you by: www.cascademechanical.com

2. Easy DIY Furnace Maintenance Tips
Efficient operation of a furnace is as a result of
good maintenance. Despite the kind of furnace
you have, there are number of things you can
do to keep it in a good condition without having
to call a professional.
Maintenance will also save you from
unnecessary repairs that may be costly.

3. Easy DIY Furnace Maintenance Tips
When a furnace malfunctions, the three major
components that are likely to be associated
with the issue include the distribution source of
the system, the heat/cold source or the
thermostat.
If the furnace fails to run completely, it might
have lost power. Fuel may not be reaching the
unit. If the furnace uses oil or gas, it may not be
igniting.

4. Easy DIY Furnace Maintenance Tips
But if the furnace is able to turn on but you
cannot feel the warm or cold air in the rooms of
your home, the problem is most likely to be with
the distribution system or the blower.
A faulty thermostat or control could also
prevent the system from turning on, or it could
cause the system to turn on and off repeatedly.

5. Easy DIY Furnace Maintenance Tips
Whatever problem you think your furnace is
having, it is always best to start with the
simplest troubleshooting procedures. In most
cases, resolving issues with the furnace
requires only patience and common sense.
Before you start troubleshooting your furnace,
you need to make sure that it is receiving
power.

6. Easy DIY Furnace Maintenance Tips
You should then look for any blown fuses or
tripped circuit breakers at the furnace's main
entrance panel.
The power entrance for some furnaces is
located differently to the main entrance while
others have their fuses mounted either in or on
the unit. You need to know the make of your
system.

7. Easy DIY Furnace Maintenance Tips
Try resetting the unit if it has a RESET button.
Before pressing RESET, you should allow the
motor to cool for about 30 minutes.
If the unit still fails to start, wait for another 30
minutes and then press the reset button again.
Repeat at least one more time if it still does not
start.

8. Easy DIY Furnace Maintenance Tips
Some units have a separate power switch, so
you will need to make sure that the switch is
turned on if your unit is made that way. You
should also check to make sure that the
thermostat is properly set.
If the furnace uses gas, check to make sure
that the gas supply is turned on and its pilot
light is lit. If it is uses oil, make sure that the
supply of oil is adequate.

9. Easy DIY Furnace Maintenance Tips
The furnace part that you need to give special
attention is the heat/cold source. It is the most
complicated part of the unit and also the part
that is most likely to be neglected.
Issues in this area may cause distribution
problems, so you need to make sure that it is
checked regularly to prevent problems.

10. Easy DIY Furnace Maintenance Tips
Even as you do DIY maintenance on your
furnace from time to time, it is also important to
make sure that it is checked at least once every
year by a professional.
The best time to hire a professional to check it
is the end of the heating season.

11. Easy DIY Furnace Maintenance Tips
For more info on furnace tips and tricks, please
visit us at Cascade Mechanical today.

12. Easy DIY Furnace
Maintenance Tips
 Brought to you by: www.cascademechanical.com