2. Patients do the strangest things…
people are unpredictable…
your temporary material shouldn’t be.
3. DenMat’s NEW
Perfectemp10
The next generation of
Perfectemp is everything that
defines a premium temporary
crown and bridge
material, that creates beautiful
looking temporaries that are as
strong and durable as leading
competitors, at a more
affordable price.
4. Perfectemp10’s Key Highlights
•
•
•
•
•
•
•
•
10:1 automix formula
Accelerated set times (4:30 minutes total)
Minimal oxygen inhibited layer for optimal handling
High compressive strength (400MPa) and improved
flexural strength (120 MPa)
Small filler particle size (<1μm) results in a glossy
surface
Available in cartridge (50ml) and syringe (10ml)
delivery systems
5 Vita shades for a perfect match:
– A1, A2, A3.5, B1, BL-2
Free of Bispehnol A & Derivatives
5. Perfectemp10 Features Accelerated Set
Times
00:00
00:40
1:30 – 2:30
4:30
Working and Set Times
40 seconds*
Pouring Perfectemp10 into the impression and
placement in the mouth
Curing in the mouth
1:30-2:30 minutes*
Removal from the mouth
Full curing
4:30 minutes*
Preparation of the temporary restoration
*This is an average and can vary +/- ten seconds.
6. Perfectemp10 Available in 5
Diverse Shade Options
Using the Vita shade guide, Perfectemp10 offers a
perfect match to shades A1, A2, A3.5, B1 and BL-2
to suit virtually any patient.
7. Perfect-Looking Provisionals
Small filler particle size (<1μm)
• Results in a glossy surface -minimal or no polishing required to
achieve natural tooth luster
• In fact, in most cases all you need to do is a quick polish with gauze or buff with
a soft-lex disc for supreme shine.
Uniform level structure
• Produces a high luster without polishing and hinders the accumulation of
plaque
8. Perfectemp10 Features & Benefits
Features
Benefits
10: 1 Automix Formulation
Provides better strength, greater flexibility without brittleness, and accelerated set times
High compressive strength and
improved flexural strength
Provides stability and durability
Uniform level structure
Produces a high luster without polishing and hinders the accumulation of plaque
Only 3.4% shrinkage
Accurate fit and marginal integrity
Minimal Oxygen Inhibited Layer
Provides optimal handling
Small filler particle size (<1μm)
results in a glossy surface
Nice translucency – naturally beautiful temporaries & minimal polishing required
Minimal heat generation
Does not pose any threat to pulp - Increased comfort to patients with sensitive teeth
Multiple Uses
Highly esthetic temporary crowns, partial crowns, bridges, inlays, onlays and veneers
Bisphenol A Free
No health effects on the treating dentist or patient by exposure to Bisphenol A; provides greater
flexibility without brittleness
9.
10. Unbeatable Value
Pricing $/50mL Cartridge*
$250
$209
$200
$150
$217
$227
$170
$140
$100
$50
$0
Perfectemp10
Structur 3
Luxatemp Ultra
Protemp Plus
Integrity MultiCure
*List prices are from Henry Schein
12. Perfectemp10 Technical Specifications
• Shades: A1, A2, A3.5, B1, BL-2
• Total Set Time: 4:30
– Working Time: 40 seconds
– Intraoral Set Time: 1:30-2:30
• Delivery Methods:
– 10 ml syringe: automix, extrudes
easily, providing up to 20 units of
material
– 50 ml 10:1 automix cartridge
provides up to 100 units of material
• Shelf Life:
– 24 mos. from manufacture
Physical Properties
E-Modulus - 3500 MPa
Flexural Strength - 120 MPa
Compressive Strength - 400 MPa
Diametral tensile strength - 70 MPa
Volume Shrinkage < 3.4%
Extrusion Force 20mm/min - 400 N
13. Key Takeaways
• Comparable to leading brands at
price that is up to 33% less
• Improved Esthetics
• Exceptional strength and
durability
• Optimal handling
• Accelerated set times
• 10:1 auto-mix delivery system
• Minimal oxygen inhibited layer
• Ideal for crowns, partial crowns
bridges, inlays, onlays and veneers
• Available in 5 Vita shades for a
perfect match:
• Offered in cartridge & syringe
delivery systems
15. See why your peers are raving
about Perfectemp10!
“Perfectemp10 is much better than all other materials we have used in the
past, perfect margins, no adjustment to the bite and a great fit! My assistants
love it!”
-Current Structur 3 User
“Very surprised at the ease of use—the material was less brittle, prettier, and
stronger than the current material we are using in our office.”
-Current Integrity User
“Very accurate shade match, the material polished nicely, trimming and clean
up was good! Great job, very good product!”
-Current Luxatemp User
16. Thank you very much for your time! We
look forward to hearing your feedback.
Please do not hesitate to contact us should
you have any questions!
Hilary Brown, Product Manager
Danielle Hyman, Associate Product Manager
Phone: 805-922-8491 ext. 3108
Phone: 805-346-3700 Ext. 3425
Email: hbrown@denmat.com
Email: dhyman@denmat.com
