AICTE's comprehensive guide to internship policy

ALL INDIA COUNCIL FOR TECHNICAL EDUCATION
Nelson Mandela Marg, Vasant Kunj, New Delhi-110070
AICTE
INTERNSHIP POLICY:
GUIDELINES & PROCEDURES

1
INDEX
Chapter Contents
1 INTERNSHIP & ITS IMPORTANCE
1.1 Introduction
1.2 Objectives
1.3 Benefit of Internship/Training
1.3.1 Benefits to the Industry
1.3.2 Benefits to Students
1.3.3 Benefits to the Institute
2 AICTE GUIDELINES FOR ORGANIZING INTERNSHIP
2.1 Internship duration and academic credentials
2.2 Training Placement Cell in Colleges / Universities & its role in providing Internship
2.3 Pre-Internship requirements to be fulfilled by the Institutes
2.4 Guidelines for students Health, safety and welfare of apprentices
3 GUIDELINES FOR INDUSTRY FOR PROVIDING INTERNSHIP
3.1 Identify Targets/goals
3.2 Pre-Internship Planning
3.3 Prepare a written plan
3.4 Recruitment of intern(s)
3.5 Managing/ facilitating the intern(s)
4 INTERNSHIP REPORT
4.1 Student’s Diary/ Daily log
4.2 Internship Report
5 MONITORING & EVALUATION OF INTERNSHIP
5.1 Evaluation by Industry
5.2 Evaluation by surprise visit by Staff/ Faculty Mentor visit
5.3. Evaluation through seminar presentation/viva-voce at the Institute
6. AICTE Activity Point Programme
7. Guidelines for Internship/ Industrial project/ Industrial Research for PG
8. AICTE’S ASSISTANCE/ FACILITATION
8.1 MoUs with different organisations to facilitate internship programme
8.2 General Internship guidelines
8.3. Mapping of internship programme outcome with NBA Graduate attributes
9. PROCEDURES / FORMATS FOR ORGANIZING INTERNSHIPS.
9.1 Format for Student internship program application
9.2 Format for Request letter from institute to internship provider
9.3 Objectives/ guidelines/ agreement: Internship synopsis format
9.4 Format for Relieving letter of student and industry
9.5 Student’s daily/ diary log format
9.6 Format for Supervisor evaluation of intern
9.7 Format for Student evaluation of internship (to be filled by students after internship completion)
9.8 Performa for evaluation of six months industrial training by institute
9.9 Format for evaluation sheet
9.10 Format of Attendance sheet

2
AICTE INTERNSHIP POLICY: GUIDELINES & PROCEDURES

3
CHAPTER 1
INTERNSHIP & ITS IMPORTANCE
1.1 INTRODUCTION
The rise in global competition has prompted organizations to devise strategies to have a talented and innovative
workforce to gain a competitive edge. Developing an internship policy is an impactful strategy for creating a future
talent pool for the industry. The Internship program not only helps fresh pass-outs in gaining professional know-how
but also benefits, corporate on fresh perspectives on business issues and even discovering future business leaders.
The interaction of Technical Institutions with the industries has been restricted to the level of faculty communications
and 2 to 4 hour industrial visits by the students generally. The institutions are under a great stress to renew education
offered by them, to be as close as possible to the industrial requirement and expectations. Competition in the job
sector is rising exponentially and securing entry-level jobs is getting very difficult, as the students passing out
from technical institutions lack the experience and skills required by industry. AICTE has initiated various activities
for promoting industrial internship at the graduate level in technical institutes. The main aim of these initiatives is
enhancement of the employability skills of the students passing out from Technical Institutions. AICTE has prepared
a model curriculum with the help of prominent academicians of the country so that the country may produce
competent employable graduates as per the needs of the industries. The model curriculum includes the internship
for students of six months’ duration at different stages of the programme.
Keeping this in view, AICTE has developed this Model Internship Guidelines for organizing Internship at degree and
diploma level. These guidelines comprise of Steps for Establishing, Maintaining & Fostering Internships. AICTE’s
MoUs with various Ministries, Government/ Non-Government/ Private organizations to facilitate internship have also
been included.
The internship experience will augment outcome based learning process and inculcate various attributes in a student
in line with the graduate attributes defined by the NBA.
1.2 OBJECTIVES
Internships are educational and career development opportunities, providing practical experience in a field or
discipline. They are structured, short-term, supervised placements often focused around particular tasks or projects
with defined timescales. An internship may be compensated, non-compensated or some time may be paid. The
internship has to be meaningful and mutually beneficial to the intern and the organization. It is important that the
objectives and the activities of the internship program are clearly defined and understood. Following are the intended
objectives of internship training:
• Will expose Technical students to the industrial environment, which cannot be simulated in the classroom and
hence creating competent professionals for the industry.
• Provide possible opportunities to learn, understand and sharpen the real time technical / managerial skills
required at the job.
• Exposure to the current technological developments relevant to the subject area of training.
• Experience gained from the ‘Industrial Internship’ in classroom will be used in classroom discussions.
• Create conditions conducive to quest for knowledge and its applicability on the job.

4
• Learn to apply the Technical knowledge in real industrial situations.
• Gain experience in writing Technical reports/projects.
• Expose students to the engineer’s responsibilities and ethics.
• Familiarize with various materials, processes, products and their applications along with relevant aspects of
quality control.
• Promote academic, professional and/or personal development.
• Expose the students to future employers.
• Understand the social, economic and administrative considerations that influence the working environment
of industrial organizations
• Understand the psychology of the workers and their habits, attitudes and approach to problem solving.
1.3 BENEFITS OF INTERNSHIP:
1.3.1 Benefits to the Industry
• Availability of ready to contribute candidates for employment.
• Year round source of highly motivated pre-professionals.
• Students bring new perspectives to problem solving.
• Visibility of the organization is increased on campus.
• Quality candidate’s availability for temporary or seasonal positions and projects.
• Freedom for industrial staff to pursue more creative projects.
• Availability of flexible, cost-effective work force not requiring a long-term employer commitment.
• Proven, cost-effective way to recruit and evaluate potential employees.
• Enhancement of employer’s image in the community by contributing to the educational enterprise.
1.3.2 Benefits to Students:
• An opportunity to get hired by the Industry/ organization.
• Practical experience in an organizational setting.
• Excellent opportunity to see how the theoretical aspects learned in classes are integrated into the practical
world. On-floor experience provides much more professional experience which is often worth more than
classroom teaching.
• Helps them decide if the industry and the profession is the best career option to pursue.
• Opportunity to learn new skills and supplement knowledge.
• Opportunity to practice communication and teamwork skills.
• Opportunity to learn strategies like time management, multi-tasking etc in an industrial setup.
• Opportunity to meet new people and learn networking skills.

5
• Makes a valuable addition to their resume.
• Enhances their candidacy for higher education.
• Creating network and social circle and developing relationships with industry people.
• Provides opportunity to evaluate the organization before committing to a full time position.
1.3.3. Benefits to the Institute:
• Build industrial relations.
• Makes the placement process easier.
• Improve institutional credibility & branding.
• Helps in retention of the students.
• Curriculum revision can be made based on feedback from Industry/ students.
• Improvement in teaching learning process.

6
CHAPTER - 2
AICTE GUIDELINES FOR ORGANIZING INTERNSHIP
2.1 INTERNSHIP DURATION AND ACADEMIC CREDENTIALS:
The following framework is proposed to give academic credit for the internship undergone as part of the programme.
• A minimum of 14-20 credits of Internship/ Entrepreneurial activities / Project work/ Seminar and Inter/ Intra
Institutional Training may be counted toward B. Tech. degree programme and 10-14 credits for three-year
diploma programme.
• Here, 1 credit is equivalent to minimum 40-45 hours of work. Therefore, a full-time intern is expected to
spend 40 - 45 hours per week on Internship, Training, Project work, Seminar activities etc. This will result in
about 600 to 700 hours of total internship duration for B. Tech and 450-500 hours for diploma.
Internships may be full-time or part-time; they are full-time in the summer vacation and part-time during the
academic session. AICTE curriculum is flexible to adjust internship duration. Therefore, opportunities must
be provided for experiences that cannot be anticipated when planning the course. The institutes have the
flexibility to schedule internship, Project work, Seminar etc. according to the availability of the opportunities.
However, minimum requirement regarding Internship duration and credits is as follows:
Table:1 Credit Framework for Internship
S.N Schedule Duration Activities Credits
(Degree) (Diploma) (Degree) (Diploma) Degree/ Diploma (Degree)
14-20
(Diploma)
10-16
1 Summer
vacation after
2nd Semester
Summer
vacation after
2nd Semester
3-4
weeks
3-4
weeks
Inter/ Intra Institutional
• Activities
3-4 3-4
2 Summer
vacation after
4th Semester
Summer
vacation after
4th Semester
4-6
weeks
4-6
weeks
Industrial/Govt./ NGO/MSME/
Rural Internship/ Innovation /
Entrepreneurship
4-6 4-6
3 Summer
vacation after
6th Semester
6th Semester 4-6
weeks
3-4
weeks
Industrial/Govt./ NGO/MSME/
Rural Internship/ Innovation /
Entrepreneurship
4-6 3-4
4 8th Semester 8th Semester 3-4
Weeks
Project work, Seminar (excluding
credits for Advanced Courses)
3-4
Table1 states that during the summer vacations, after the 2nd Semester, students are required to be involved in
Inter/ Intra Institutional Activities viz; Training with higher Institutions; Soft skill training organized by Training
and Placement Cell of the respective institutions; contribution at incubation/ innovation /entrepreneurship cell
of the institute; participation in conferences/ workshops/ competitions etc.; Learning at Departmental Lab/
Tinkering Lab/ Institutional workshop; Working for consultancy/ research project within the institutes and
Participation in all the activities of Institute’s Innovation Council for eg: IPR workshop/Leadership Talks/ Idea/
Design/ Innovation/ Business Completion/ Technical Expos etc.
During the summer vacation after 4th/ 6th semester, students are ready for industrial experience. Therefore,
they may choose to undergo Internship / Innovation / Entrepreneurship related activities. Students may

7
choose either to work on innovation or entrepreneurial activities resulting in start-up or undergo internship
with industry/ NGO’s/ Government organizations/ Micro/ Small/ Medium enterprises to make themselves
ready for the industry. In case student want to pursue their family business and don’t want to undergo
internship, a declaration by a parent may be submitted directly to the TPO.
AICTE has taken various initiatives to connect AICTE approved institutions located in a particular district with
nearby villages for technological intervention and networking for holistic transformation of the rural population
by identifying the possibilities of localized employment, convergence, cost reduction, Youth and Women
empowerment etc. Keeping this in view, AICTE Rural/ Social Internship Programme has been proposed. It is
proposed that if a student chooses any of the suggestive activity under AICTE Activity Programme, devotes 6
months (required Internship duration) and achieve significant goals, during his degree programme, his credit
requirement for the internship will be considered fulfilled.
During the Last semester/ 8th semester, students may take Project Work & Seminar as specified in the
curriculum of the institute.
Every student is required to prepare a file containing documentary proofs of the activities done by him. The
evaluation of these activities will be done by Programmed Head/Cell In-charge/ Project Head/ TPO/ faculty
mentor or Industry Supervisor as specified in the Table 2.
The Table 2 gives the Overall compilation of internship activities, list of sub-activities under each of these
segments, the level of achievement expected, evidence needed to assign the points and the minimum duration
needed for certain activities.
Table – 2 Overall compilation of Internship Activities / Credit Framework
Major Head of
Activity
Credits
(Max.)
Suggested
period
(Max.)
Total Duration/ Week
Sub Activity Head
Proposed
Document
as
Evidence
Evaluated by
Performance
appraisal/
Maximum points/
activity
Degree Diploma Degree Diploma
Inter/ Intra
Institutional
Activities
3-4 34
During
summer
vacation after
2d sem.
3-4 3-4
Inter/ Intra Institutional
Workshop/ Training/
Certificate
Programme
Head
Satisfactory/ Good/
Excellent
Working for consultancy/
research project
Certificate
Programme
head
Satisfactory/ Good/
Excellent
Festival (Technical /
Business / Others)
Events/
Certificate
Programme
Head
Satisfactory/ Good/
Excellent
Contribution in
Incubation/ Innovation/
Entrepreneurship Cell/
Institutional Innovation
Council
Certificate Cell In-charge
Satisfactory/ Good/
Excellent
Learning at Departmental
Lab/Tinkering Lab/
Institutional workshop
Certificate Cell In-charge
Satisfactory/ Good/
Excellent
Innovation
/ IPR /
ntrepreneurship 4-6 4-6
During
summer
vacation after
4th/ 6th sem.
4-6 4-6
Participation in
innovation related
completions for eg.
Hackathons etc.
Certificate
Faculty
Mentor
Satisfactory/ Good/
Excellent
Development of new
product/ Business Plan/
registration of start-up
Certificate
Programme
Head
Satisfactory/ Good/
Excellent

8
Participation in all the
activities of Institute’s
Innovation Council for
eg: IPR workshop/
Leadership Talks/ Idea/
Design/ Innovation/
Business Completion/
Technical Expos etc.
Certificate
President/
Convener of
ICC
Satisfactory/ Good/
Excellent
Work experience at
family business
Declaration
by Parent
TPO
Satisfactory/ Good/
Excellent
Internship 4-6 4-6
During
summer
vacation after
4th/ 6th sem.
4-6 4-6
(Internship with Industry/
Govt. / NGO/ PSU/ Any
Micro/ Small/ Medium
enterprise/ Online
Internship
Evaluating
Report
Faculty
Mentor/ TPO/
Industry
supervisor
Satisfactory/ Good/
Excellent
Rural Internship 4-6 4-6
During
summer
vacation after
4th/ 6th sem.
4-6 4-6
Long Term goals under
rural Internship
Evaluating
Report
Faculty
Mentor/ TPO/
NSS/NCC
head
Satisfactory/ Good/
Excellent
Project Work/
Seminar/
3-4 - 8th sem. 3-4 -
As specified in the
curriculum of the
institute.
Project
Report
Project Head
Satisfactory/ Good/
Excellent
2.2 TRAINING & PLACEMENT CELL IN COLLEGES / UNIVERSITIES & ITS ROLE IN
PROVIDING INTERNSHIP
All the AICTE approved institutes are required to have a dedicated Training and Placement Cell headed by Training
and Placement Officer (TPO). In any institute TPO plays an important role in boosting the career of students. The
purpose of the Training and Placement Officer is to guide students to choose the right career and to plan for programs
and activities to enhance knowledge, skill, attitude and the right kind of aptitude to meet the manpower requirements
of the Industry. The overall role of the Training & Placement cell is of a facilitator and counselor for training and
placement related activities.
The industry is always on the lookout for students who are vibrant, energetic individuals and ready to accept
challenges, attentive, with a good academic background, fast learners, open to learning even at work and more
importantly possessing good communication skills. TPO shall assist students to develop/clarify their academic
and career interests, and their short and long-term goals through individual counselling and group sessions. The
placement cell shall act as a contact place and facilitator to arrange internship of the students, campus visits and
conduct of the recruitment process of the employers for the purposeful placement of students of the institution.
Further, to assist students for industrial training at the end of fourth and sixth semester, Training & Placement cell
shall also design and implement internal curriculum, take classes, arrange experts, arrange agency for student’s
Personality Development, Improve Communication Skills, Vocabulary, prepare students for Resume Preparation
& Email Writing, Group Discussion, Interview Skills, Aptitude Training & Practice Tests, Technical report writing,
presentation skills, Foreign Languages proficiency etc.
Every institute may allocate 1% of their total budget to facilitate the functioning of Training and Placement Cell and
meet the funding requirements for various activities.

9
The proposed organizational structure of each Training and placement cell is as follows:
Fig.1. Organizational Structure at Institution Level
Training and Placement Officer of the Institute will be supported by a Departmental coordinator for Training and
Placement Activities and Faculty Supervisors/ Mentors designated by the Head of the concerned Departments/
Principal. Each department will have a student’s committee comprising of 1-3 students from each class for supporting
Training and placement activities headed by Student Coordinator. Departmental coordinator and Faculty Supervisors/
Mentors will be nominated at the start of the Academic year for each batch. However, student coordinator being the
representative of students will be selected by the students with the help of Training and Placement Officer.
Faculty Mentor/Supervisors have to play active roles during the internship and minimum 20 students are to be
supervised by each faculty mentor or as per the departmental strength.
2.3 INTERNSHIP GUIDELINES:
The T&P cell will arrange internship for students in industries/organization after second, fourth and six/seventh
semester(s) or as per AICTE/ affiliating University guidelines. Institutions may also device online system for arranging
&managing internships. The general procedure for arranging internship is given below:
• Step 1: Request Letter/ Email from the office of Training & Placement cell of the college should go to industry
to allot various slots of 4-6 weeks during summer vacation as internship periods for the students. Students
request letter/profile/ interest areas may be submitted to industries for their willingness for providing the
training. (Sample attached)
• Step 2: Industry will confirm the training slots and the number of seats allocated for internships via
Confirmation Letter/ Email. In case the students arrange the training themselves the confirmation letter will
be submitted by the students in the office of Training & Placement through concerned department. Based on
the number of slots agreed to by the Industry, TPO will allocate the students to the Industry. In addition, the
internship slots may be conveyed through Telephonic or Written Communication (by Fax, Email, etc.) by the
TPO or other members of the T&P cell / Faculty members who are particularly looking after the Final/Summer
Internship of the students.

10
• Step 3: Students on joining Training at the concerned Industry / Organization, submit the Joining Report/
Letters / Email.
• Step 4: Students undergo industrial training at the concerned Industry / Organization. In-between Faculty
Member(s) evaluate(s) the performance of students once/twice by visiting the Industry/Organization and
Evaluation Report of the students is submitted in department office/TPO with the consent of Industry persons/
Trainers. (Sample Attached)
• Step 5: Students will submit training report after completion of internship.
• Step 6: Training Certificate to be obtained from industry.
• Step 7: List of students who have completed their internship successfully will be issued by Training and
Placement Cell.
2.4 GUIDELINES FOR THE STUDENTS:
Internship/ Placement is a student centric activity. Therefore, the major role is to be played by the students. TPOS
may also include involvement of the student in the following activities :
• Design and Printing of Placement Brochure – Soft copy as well as Hard copy.
• Preparing list of potential recruiters and past recruiters.
• Placement Presentation at various organizations, if required.
• Coordinating activities related to Placement including companies HR team visit to institutes.
At the commencement of the session, the members of the student placement committee would be selected from the
interested students, who submit applications to TPO to work on placement committee. Among the volunteers, one
student would be nominated as “Student Coordinator” who would be assigned major responsibilities and would be
accountable to TPO.
For allotment of internship slots all the students will be required to submit “student internship programme application”
before the prescribed date (Format attached).
The offer given by the company is to be accepted irrespective of the Company / Job profile or job location or stipend
offered.
A student who will voluntarily give in writing that He / She does not require placement assistance from the Institute
would be exempted from participation in the Placement activities. This could be because of various reasons such as
– Joining family business, opting for higher education or competitive examination etc. Though organizations select
individual students, but Recruitment is a team effort. Hence, all students while interacting with the recruitment teams
should be careful and behave responsibly.
2.5 HEALTH, SAFETY AND WELFARE OF INTERNS:
AS per AICTE approval procedure, all institutions are required to ensure insurance of all the students and when any
intern is undergoing training in a mine, the provisions of Chapter V of the Mines Act, 195, shall apply in relation to
the health and safety of the trainees as if they were persons employed in the same.

11
CHAPTER – 3
GUIDELINES FOR INDUSTRY FOR PROVIDING INTERNSHIP
For meeting the objectives of the internship programme and successful implementation, Internship program has to
be designed keeping in view the company’s requirements and students profile. Design of internship programme can
be developed by industry in collaboration with the institute. It may be comprised of the following steps:
3.1 IDENTIFY TARGETS/GOALS
A meaningful discussion with management in the organization can create a consensus on program goals that can
be understood by all involved.
• What does the company hope to achieve from the interns?
• Is a small company searching for technical help?
• Is the company growing quickly and having difficulty in finding motivated new employees?
• Is it a non-profit organization that doesn’t have a lot of money to pay, but can provide an interesting and
rewarding experience?
• Is the organization searching out new employees with management potential?
3.2 PRE-INTERNSHIP PLANNING
Will you pay the intern?
•If so, how much?
•Wages vary widely from
field to field and location
to location, so be sure
to offer competitive
incentives
Where will you put the
intern
•Do you have adequate
workspace for them?
What sort of academic
background and
experience do you want
in an intern?
•Intern’s academic
background must be
relevent to the technology
used by Industry
Who will have the
primary responsibility for
the intern?
•In industry - Internship
Supervisor
•From Institute - Faculty
mentor
What task an intern will
be assigned and what is
the desired outcome?
•If so, how much?
•Wages vary widely
from field to field and
location to location, so be
sure to offer competitive
incentives.
Internship Planning by Industry
3.3 PREPARE A WRITTEN PLAN
Carefully plan and write the internship program – An internship plan has to be developed which will be referred to by
industry supervisor/mentor, interns and institute faculty. An internship plan should incorporate the following:
• Job description/internship duties.
• Name of the project, if any.
• Internship Schedule and Expected learning outcomes.
Students can offer a fresh perspective to the business, strategies, and plans. To really reap these benefits, students
may be included in brainstorming sessions and meetings etc. The intern may also be given opportunity to understand
Project Management and finances. This will help him to apply these to one’s own work, as a member and leader

12
in a team. It’s no secret that this generation is more tech-savvy than any other before. Companies may take the
opportunity to use them to find out some digital solutions for various issues.
3.4 ALLOCATION OF STUDENTS TO INDUSTRY
After the allocation of internship slots by the industry to the institute, the students have to be allocated to the
industry. In case the industry wants to select the students based on their requirements, the industry can conduct an
interaction/ interview with the students and select the students. In case the industry leaves it to the Institute to select
the students, TPO may evolve transparent criteria for allocation of students to the industry based on the requirements
of industry and students’ interest.
3.5 MANAGING/ FACILITATING THE INTERN(S)
Orientation of Interns: Orient intern in the new workplace. This might take the form of a conventional orientation
program or merely a walk around the office, depending on the size of the company. Give interns an overview of the
organization; some companies give talks or hand out information about the company’s history, vision and services.
Explain who does what and what the intern’s duties will be. Introduce him or her to co-workers.
Resource requirement of Interns: Give the intern a desk, point out the supply room, and introduce the technical
support people.
Guidance/ Regular Feedback: It’s important to give students lots of feedback. If interns have never done the kind of
work before, they’ll want to know if their work is measuring up to organizational expectations.
Monitoring of intern’s progress every day: Daily progress report of Intern is to be evaluated by industry supervisor.
Maximum use of short term internship has to be ensured for the intern as well as industry.
Periodically, examine what the intern has produced and make suggestions. Weekly supervision meetings can help
to monitor the intern’s work.

13
CHAPTER – 4
INTERNSHIP REPORT
4.1 STUDENT’S DIARY/ DAILY LOG
The main purpose of writing daily diary is to cultivate the habit of documenting and to encourage the students to
search for details. It develops the students’ thought process and reasoning abilities. The students should record in the
daily training diary the day to day account of the observations, impressions, information gathered and suggestions
given, if any. It should contain the sketches & drawings related to the observations made by the students.
The daily training diary should be signed after every day by the supervisor/ in charge of the section where the student
has been working. The diary should also be shown to the Faculty Mentor visiting the industry from time to time and
got ratified on the day of his visit.
Student’s Diary and Internship Report should be submitted by the students along with attendance record and an
evaluation sheet duly signed and stamped by the industry to the Institute immediately after the completion of the
training. It will be evaluated on the basis of the following criteria:
• Regularity in maintenance of the diary.
• Adequacy & quality of information recorded.
• Drawings, sketches and data recorded.
• Thought process and recording techniques used.
• Organization of the information.
4.2 INTERNSHIP REPORT
After completion of Internship, the student should prepare a comprehensive report to indicate what he has observed
and learnt in the training period. The student may contact Industrial Supervisor/ Faculty Mentor/TPO for assigning
special topics and problems and should prepare the final report on the assigned topics. Daily diary will also help
to a great extent in writing the industrial report since much of the information has already been incorporated by
the student into the daily diary. The training report should be signed by the Internship Supervisor, TPO and Faculty
Mentor. The Internship report will be evaluated on the basis of following criteria:
i. Originality.
ii. Adequacy and purposeful write-up.
iii. Organization, format, drawings, sketches, style, language etc.
iv. Variety and relevance of learning experience.
v. Practical applications, relationships with basic theory and concepts taught in the course.

14
CHAPTER – 5
MONITORING & EVALUATION OF INTERNSHIP
The industrial training of the students will be evaluated in three stages:
5.1. Evaluation by Industry.
5.2. Evaluation by faculty supervisor on the basis of site visit(s).
5.3. Evaluation through seminar presentation/viva-voce at the Institute.
5.1. EVALUATION BY INDUSTRY
The industry will evaluate the students based on the Punctuality, eagerness to learn, Maintenance of Daily Diary and
skill test in addition to any remarks.
5.2. MONITORING/ SURPRISE VISIT BY TPO/ STAFF/ FACULTY MENTOR
TPO/Staff/ Faculty Mentor of the institutes will make a surprise visit to the internship site, to check the student’s
presence physically, if the student is found absent without prior intimation to the T & P Cell, entire training will be
cancelled. Students should inform the TPO, faculty mentor as well as the industry supervisor at least one day prior
to availing leave by email. Students are eligible to avail 1-day leave in 4 weeks and 2 days leave in 6 weeks of the
internship period apart from holidays and weekly offs.
5.3. EVALUATION THROUGH SEMINAR PRESENTATION/VIVA-VOCE AT THE INSTITUTE
The student will give a seminar based on his training report, before an expert committee constituted by the concerned
department as per norms of the institute. The evaluation will be based on the following criteria:
• Quality of content presented.
• Proper planning for presentation.
• Effectiveness of presentation.
• Depth of knowledge and skills.
• Attendance record, daily diary, departmental reports shall also be analyzed along with the Internship Report.
Seminar presentation will enable sharing knowledge & experience amongst students & teachers and build
communication skills and confidence in students.

15
CHAPTER – 6
AICTE ACTIVITY POINT PROGRAMME
ADDITIONAL REQUIREMENT FOR EARNING 4 YEARS DEGREE PROGRAMME
Apart from technical knowledge and skills, to be successful as professionals, students should have excellent soft
skills, leadership qualities and team spirit. They should have entrepreneurial capabilities and societal commitment. In
order to match these multifarious requirements, AICTE has created a unique mechanism of awarding minimum100
Activity Points over and above the academic grades.
Every regular student, who is admitted to the 4 years Degree programme, is required to earn 100 Activity Points in
addition to the required academic grades, for getting 4 Years degree programme. Students entering 4 years Degree
programme through lateral entry are required to earn 75 Activity Points, in addition to the academic grades, for
getting 4 years’ degree program. Similarly, Diploma students are required to earn 75 Activity Points during 3 years
of their diploma programme.
AICTE recommends 300-400 hours Activity Programme for each degree student for Community service and allied
activities. Similarly, 200-250 hours should be devoted by Diploma student for Community service and allied activities
as an additional requirement or non-credit programme. Here, 40-45 hours are equivalent to 1 week.
These activities will be coordinated by NSS/NCC/Sports/SAGY Coordinator or TPO of the Institute. The student will
be provided a certificate from the concerned coordinator and Institutional Head.
Every student is required to prepare a file containing documentary proofs of activities, done by him/ her. This file
will be duly verified by the concerned evaluator as listed in Table-4. The student should earn at least 100 activity
points before he/ she appears for his/ her Final Examinations. The points students have earned will be reflected on
the student’s transcript. However, there will be neither grades/ marks for these points nor will there be any effect on
SPI/CPI/CGPA etc.
As proposed under the AICTE Rural Internship Programme, if a student completes any long term goal during his
degree programme, it will be counted as Internship Activity and credit requirement for the internship is fulfilled.
However, if only short term interventions under the programme are attempted it will be counted towards AICTE
Activity Point Programme requisite. Following suggestive activities as Long Term Goals may be carried out by
students in teams:
1. Prepare and implement plan to create local job opportunities.
2. Prepare and implement plan to improve education quality in village.
3. Prepare an actionable DPR for Doubling the village Income.
4. Developing Sustainable Water Management system.
5. Prepare and Improve a plan to improve health parameters of villagers.
6. Developing and implementing of Low Cost Sanitation facilities.
7. Prepare and implement plan to promote Local Tourism through Innovative Approaches.
8. Implement/Develop Technology solutions which will improve quality of life.
9. Prepare and implement solution for energy conservation.

16
10. Prepare and implement plan to Skill village youth and provide employment.
11. Develop localized techniques for Reduction in construction Cost.
12. Prepare and implement plan of sustainable growth of village.
13. Setting of Information imparting club for women leading to contribution in social and economic issues.
14. Developing and managing Efficient garbage disposable system.
15. Contribution to any national level initiative of Government of India. For eg. Digital India/ Skill India/ Swachh
Bharat Internship etc
The student may choose any activities as per their liking in order to earn the AICTE Activity points. These activities
can be spread over the years, as per convenience of the student. The Minimum points required as per entry level of
any student are presented in Table 3.
Table 3. The activity Point requirement for Degree/ Diploma/ Lateral entry students
Level of entry in degree course Total Years for
Points
Minimum Points
Degree Programmes
1st Year Regular 1st to 4th Year 100
2nd Year (3rd Sem.) through lateral entry or transfer from other University 2nd to 4th year 75
Diploma Programmes
1st Year Regular 1st to 3rd Year 75
2nd Year (3rd Sem.) through lateral entry 2nd to 3rd Year 50

17
Table 4: AICTE Activity Point Programme (Activity Summary Sheet)
Major Head
of Activity
Credits
(Max.)
Degree/
Diploma
Suggested
period
(Max.)
Total Duration/
Week Sub Activity Head
Proposed
Document
as
Evidence
Evaluated
by
Performance
appraisal/
Maximum
points/
activity
Maximum Points
under this
category
Degree Diploma
AICTE
Activity
Programme
Non Credit
Anytime during
the semester
during
weekends or
holidays
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Prepare and implement
plan to create local job
opportunities.
Project
Report
NSS/ NCC/
SAGY
Coordinator
of the
Institute
20
100
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
plan to improve education
quality in village.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Preparing an actionable
DPR for Doubling the
village Income.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Developing Sustainable
Water Management
system.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Prepare and Improve a
plan to improve health
parameters of villagers.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Developing and
implementing of Low Cost
Sanitation facilities.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
plan to promote Local
Tourism through Innovative
Approaches.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Implement/Develop
Technology solutions
which will improve quality
of life.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
solution for energy
conservation.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
plan to Skill village youth
and provide employment.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Develop localized
techniques for Reduction
in construction Cost.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
plan of sustainable growth
of village.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Setting of Information
imparting club for women
leading to contribution
in social and economic
issues.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Developing and managing
Efficient garbage
disposable system.
20
2 Weeks
(80-90
hrs)
1 Week
(40-45
hrs)
Contribution to any
national level initiative of
Government of India. For
eg. Digital India/ Skill India/
Swachh Bharat Internship
etc
20

18
CHAPTER – 7
INDUSTRIAL PROJECT/ INTERNSHIP/ INDUSTRIAL RESEARCH
GUIDELINES FOR POST GRADUATE LEVEL TECHNICAL
STUDENTS:
The Model Curriculum of AICTE has prescribed Standardized academic structure for all PG Programs with uniform
credit distribution. Focus is on development of advanced knowledge and specific skills required for industrial
development. Student may choose Industrial problem as Dissertation topic. The proposed Credit Framework for the
same is as follow:
Table:1 Credit Framework for Internship/ Industrial Project at PG lelvel.
S.N Schedule Activities Duration Credits
1 Semester-III • Industrial Project/ Dissertation 20 weeks 10
2 Semester-IV • Industrial Project/ Dissertation 32 weeks 20
Guidelines:
1. The candidate should submit a synopsis of the proposed work to be done during Internship programme/
Industrial Project/ Dissertation/ Industrial Dissertation. The synopsis received should be examined or evaluated
by the departmental committee to ensure that the proposed work is equivalent to M.Tech. dissertation work.
This synopsis should be submitted to the department before the candidate is relived.
2. IntimationofcommencementofinternshipshallbesubmittedtotheHODconcernedbeforethecommencement
of the ongoing semester.
3. The Industrial project work done during 6-month/one-year internship program is equivalent to their M.Tech.
one semester/ two semester thesis work.
4. Two guides will supervise the internship project work, one from the department and another one from industry.
5. Industry/Educational Organization must submit the month-wise satisfactory attendance of the students to the
department.
6. Candidate should regularly visit the institute and present his/her project progress report to their respective
guide(s).
7. The final project presentation is evaluated on the basis of the recommendation given by outside supervisor,
and further can be evaluated by institute guide.
8. If the internship project is not found to be of high quality, then the student will have to reappear in the next
semester for their M.Tech. dissertation work.
9. The candidate is required to publish internship work in conferences and journals with due permission/ consent
from the organization/industry where he has undergone the internship.
10. If the student feels that the internship work is not of high quality/not-related to their field of interest, then he/
she should submit the application to the department within three weeks and can re-join the institute.
11. Industry/ Institute should allow to produce results obtained during project/ internship period in the project
report. The written certificate to this effect from the industry/ institute is mandatory before consideration of
the proposed project/ internship.

19
CHAPTER – 8
AICTE’S ASSISTANCE/ FACILITATION
8.1MOUSWITHDIFFERENTORGANIZATIONSTOFACILITATEINTERNSHIPPROGRAMMME
In order to facilitate internships for the students, AICTE has been identifying organizations/Ministries both in India &
abroad and signing MoUs. AICTE has signed many MoUs with Industries, Training institutions, Govt. bodies which
are available on the AICTE website www.aicte-india.org. The institutions are requested to adequately publicize this
information on their website so that students can apply for internship.
Some of the MoUs signed by AICTE are as follows:
S.No. Memorandum of Understanding For more details please visit
1. AICTE’s MoU with Internshala https://www.aicte-india.org/downloads/letter_technical_
inst_mou_internshala.pdf
2. MoU with NETiit for internships in Taiwan. https://www.aicte-india.org/downloads/mou_netiit.pdf
3. AICTE’s MoU with HireMee. https://www.aicte-india.org/downloads/aicte_mou_
HireMee12_9_17.PDF
4. AICTE’s MoU with Indira Gandhi National Centre for the
Arts (IGNCA)
https://www.aicte-india.org/.../AICTE%20_IGNCA_MoU.pdf
5. AICTE’s MoU with Center for Creative Economy and
Innovation (CCEI), Daegu, Republic of Korea.
https://www.aicte-india.org/.../AICTE-CCEI%20Daegu_
MoU%20Document_ Final.pdf
6. 1.1 AICTE’s MoU with International Institute of Waste
Management (IIWM), Bangalore
https://www.aicte-india.org/sites/default/files/AICTE-
IIWM%20MoU.compressed.pdf
7. a. AICTE’s MoU with Engineering Council of India [ECl] https://www.aicte-india.org/downloads/eci.pdf
8. b. AICTE’s MoU with Fourth Ambit https://www.aicte-india.org/sites/default/files/Fourth%20
Ambit.PDF
9. AICTE’s MoU with Linkedln https://www.aicte-india.org/downloads/LinkedIn%20MoU.
PDF
10. c. AICTE’s MoU with Telecom Sector Skill Council (TSSC) https://www.aicte-india.org/downloads/mou_aicte_
tssc_22_6_17.pdf
11. 1.10. AICTE’s MoU with SCHOLARSMERIT https://www.aicte-india.org/sites/default/files/Scholarsmerit.
PDF
12. 1.11. AICTE’s MoU with Studenting Era to facilitate AICTE
approved academic institutions with services for their
students & academic faculty
https://www.aicte-india.org/sites/default/files/
Studenting%20Era.PDF
13. 1.12. AICTE’s MoU with Ministry of Micro, Small and
Medium Enterprises (MSME)
https://www.aicte-india.org/sites/default/files/Signed_MoU_
with_AICTE.compressed.pdf

20
Board of Apprenticeship Training (BOAT) and Board of Practical Training (BOPT) have shown their keen interest to
facilitate internship training for 4 years Degree/ 3 year Diploma Programme students. The details of BOAT/BOPT are
as follows:
S.No. Board of Apprenticeship Training / Board of Practical
Training (BOAT/BOPT)
Contact Details
1. Board of Apprenticeship Training, BOAT, WR, Mumbai director.boatwr@gmail.com
2. Board of Apprenticeship Training, BOAT, SR, Chennai boat_sr@vsnl.net
3. Board of Apprenticeship Training, BOAT, NR, Kanpur director@boatnr.org
boatkanpur@gmail.com
4. Board of Practical Training, ER, Kolkata director@bopter.gov.in
8.2. GENERAL INTERNSHIPS GUIDELINES
• Internship is always more valuable compared to a college project as it enables the interns to understand how
companies work, build new contacts, develop a network and most importantly work on real-life projects
executed within the company. Institutes are advised to send students for internship at least twice during the
complete program once after second year and once after third or in final year.
• Many interns seem to judge the company by the number of employees in the organization. Do use more
meaningful criteria to judge the company for the internship such as the time and training that they are willing
to devote for you, type of products, value addition and services offered by the company in relation to what
you want to learn, technologies employed by the company with respect to what you want to master etc.
• An internship is a great opportunity to learn in industrial environment without being an employee of the
company. Students are advised to set their goals prior to starting their internship and focus on completing
them during the internship.
• If a student joins a very large organization to do an internship, he must use the opportunity to learn about the
activities performed in the various departments by doing short stints in each of them. This experience will
help provide him the big-picture in better understanding the career prospects in relation to his ambitions.
• Attitude and mindset play a great role in the learning process. Do tackle all tasks given with enthusiasm and
positive attitude.
• Interns must avoid negativity and never ignore a chance offered to them to learn more about a concept,
technology, industry or company.
• Interns must be inquisitive and try to gain maximum knowledge and exposure.
• Interns shall identify a good mentor within the company and take initiative to execute new projects where one
can make a difference to the company.
• Interns should enjoy during the internship and leave with tangible accomplishments.
• The intern will maintain a regular internship schedule determined by the Intern and his/her Project Head.
• Interns shall view an internship as a bridge between college and the workplace. Do use for their full advantage
while undergoing internship:
- The intern must demonstrate honesty, punctuality and a willingness to learn during the internship program.
- The intern will obey the policies, rules and regulations of the Company and comply with the Company’s
business practices and procedures.

21
8.3. MAPPING OF INTERNSHIP PROGRAMME OUTCOME WITH NBA GRADUATE
ATTRIBUTES:
S.No. Graduate Attributes from NBA Activities proposed Outcome
1. Engineering Knowledge: Apply the
knowledge of mathematics, science,
Engineering fundamentals, and an
engineering specialization for the
solution of complex engineering
problems.
Practical experience during industrial
internship/ Project work.
An ability to apply knowledge in
application of engineering techniques,
tools and resources on the project.
The application of systematic
engineering design processes
appropriate to the internship program.
2. Problem analysis: Identify, formulate,
research literature and analyze complex
engineering problems reaching a
substantiated conclusion using first
principles of mathematics, natural
sciences and engineering sciences.
Working for Consultancy/ research
projects in the institutes.
Helping Faculty members in their
research and consultancy projects
will help student learn research
methodologies and analytical tools
and will develop an ability to use
appropriate knowledge and skills to
identify, formulate, analyze, and solve
complex engineering problems in order
to reach substantiated conclusions.
3. Design/development of solutions:
Design solutions for complex
engineering problems and design
system components or processes
that meet the specified needs with
appropriate consideration for public
health and safety and cultural, societal,
and environmental considerations.
Innovation / Entrepreneurship
Activities: Participation in Innovation
Competitions, Idea completions,
Hackathons etc
An ability to design solutions for
complex, open-ended engineering
problems and to design systems,
components or processes that meet
specified needs with appropriate
attention to health and safety risks,
applicable standards, and economic,
environmental, cultural and societal
considerations.
4. Conduct investigations of complex
problems.
Project work/ industrial training/
International Internships or advanced
engineering courses are considered for
meeting internship credit requirements
Global competitiveness and
employability of students will be
enhanced.
5. Modern tool usage: Create, select
and apply appropriate techniques,
resources, and modern engineering
and IT tools, including prediction and
modelling of complex engineering
activities, with an understanding of the
limitations.
Work on the modern tools, processes
being used in the industry. Where
possible interns should expose
themselves to advanced tools like
simulation and modelling.
Will be able to use modern tools and
processes to solve the live problems.
6. The engineer and society: Apply
reasoning informed by the contextual
knowledge to assess societal, health,
safety, legal, and cultural issues
and the consequent responsibilities
relevant to the professional engineering
practice.
The AICTE Activity Point Program
focuses on supporting all the sections
of society especially in villages.
Students will learn their social
responsibilities and to use their
professional engineering knowledge
to assess societal, health, safety, legal
and cultural issues.

22
7. Environment and Sustainability:
Understand the impact of the
professional engineering solution in
societal and environmental contexts
and demonstrate the knowledge of and
need for sustainable development.
Under the community service
activities, focus on the environment
and sustainability issues has been laid
down.
Students will learn the importance and
methods of environment protection &
sustainability and will develop an ability
to analyze social and environmental
aspects of engineering activities.
8. Ethics: Apply ethical principles and
commit to professionals ethics and
responsibilities and norms of the
engineering practice.
The intern will learn to demonstrate
honesty, punctuality and obey
Company’s business practices and
procedures.
Learning of professional ethics and
accountability will make student ready
for the future.
9. Individuals and team work: Function
effectively as an individual and as a
member or leader in diverse teams and
in multidisciplinary settings.
Students are required to help the
Committees for organizing Conference/
workshop/Competition at Institutional
Level.
Student will develop ability to work
effectively as a member and leader in
teams, preferably in a multi-disciplinary
setting.
10. Communication: Communicate
effectively on complex engineering
activities with the engineering
community and with the society
at large, such as being able to
comprehend and write effective reports
and design documentation, make
effective presentations and give and
receive clear instructions.
To assist students in industrial training
at the end of second and fourth
semester. Training & Placement shall
also organize training for student’s
Personality Development, improving
Communication Skills, report writing,
presentation skills, Foreign Languages
etc.
The student will develop an ability to
communicate effectively (oral and
written communication, report writing,
presentation skills.
11. Project Management and finance:
Demonstrate knowledge and
understanding of the engineering and
management principles and apply these
to one’s own work, as a member and
leader in a team, to manage projects
and in multidisciplinary environments.
The industry should make sure to
include interns in brainstorming
sessions and also be given opportunity
to understand Project Management and
finances.
These competencies will help the
student in horizontal and vertical
mobility.
12. Life-long learning: Recognize the need
for and have the preparation and ability
to engage in independent and life-long
learning in the broadest context of
technological change.
Students will learn to implement
knowledge into practice and innovate.
Students’ ability to ability to identify
and to address their own educational
needs in a changing world in ways
sufficient to maintain their competence
and to allow them to contribute to the
advancement of knowledge will be
enhanced.

23
CHAPTER – 9
PROCEDURES / FORMATS FOR ORGANIZING INTERNSHIPS.
FORMAT1. STUDENT INTERNSHIP PROGRAM APPLICATION
Complete and submit to the TPO/ Internship Program Coordinator. Type or write clearly.
1. Student Name:
2. Campus Address: Phone:
3. Home Address: Phone:
3a. Student email address:
4. Academic Concentration 5. Internship Semester: _________Year.
6. Overall GPA:
9. Internship Preferences
Location Core Area Company/ institution
Preferance-1
Preferance-2
Preferance-3
Faculty mentor Signature: _________________________Date___________.
Signature confirms that the student has attended the internship orientation and has met all paperwork and process
requirements to participate in the internship program,and has received approval from his/her Advisor..
Student Signature: _______________________________________Date__________.
Signature confirms that the student agrees to the terms, conditions, and requirements of the Internship Program

24
FORMAT 2: REQUEST LETTER FROM INSTITUTE TO INTERNSHIP PROVIDER
To
The General Manager (HR)
.......................................
.......................................
Subject: REQUEST FOR 04/06 WEEKS INDUSTRIAL TRAINING of M.Tech/4 years Degree Programme,
Dear Sir,
Our Students have undergone internship training in your esteemed Organization in the previous years. I
acknowledge the help and the support extended to our students during training in previous years.
/ (For first time industry) You must be aware that AICTE has made internship mandatory for all technical education
students.
In view of the above, I request your good self to allow our following_ _______students for practical raining
in your esteemed organization. Kindly accord your permission and give at least one-week time for students to join
training after confirmation.
S. No. Name Roll No. Year Discipline
If vacancies exist, kindly do plan for Campus/Off Campus Interview for_______ batch passing out students in
above branches. CHECK THIS
A line of confirmation will be highly appreciated.
With warm regards,
Yours sincerely,
Training & Placement Officer

25
FORMAT 3. OBJECTIVES/ GUIDELINES/ AGREEMENT: INTERNSHIP SYNOPSIS (THIS WILL
BE PREPARED IN CONSULTATION WITH FACULTY MENTOR)
An internship is a unique learning experience that integrates studies with practical work. This agreement is written by
the student in consultation with the faculty Mentor and Industrial supervisor. It shall serve to clarify the educational
purpose of the internship and to ensure an understanding of the total learning experience among the principal parties
involved.
Part I: Contact Information
Student
Name: ________________________________________ Student ID#______________ Class Year: ________
Campus Address: _________________________________________________________________________
City, State: ______________________________________________________________________________
Phone: ________________________________________Email: ____________________________________
Industrial Supervisor
Name: ________________________________________Title: _____________________________________
Company/Organization: _____________________________________________________________________
Internship Address: ________________________________________________________________________
City, State, Pin: ___________________________________________________________________________
Phone: ________________________________________Email: ____________________________________
Faculty Mentor
Name: ________________________________________Phone: ____________________________________
Campus Address: _________________________________________________________________________
Academic Credit Information
Internship Title: _________________________________Department: ________________________________
Course #: ____________________________________ Credits: ____________________________________
Grading Option: Credit/Non-credit _____________________________
Beginning Date: ________________________________ Ending Date: ________________________________
Hours per Week: _______________________________ Internship is: ______Paid_____Unpaid ____________

26
Part II: Internship Objectives/Learning Activities
Internship Objectives: What do you intend to learn, acquire and clarify through this internship? Try to use concrete,
measurable terms in listing your learning objectives under each of the following categories:
• Knowledge and Understanding
• Skills
Learning Activities: How will your internship activities enable you to acquire the knowledge/understanding, and
skills you listed above?
On the job: Describe how your internship activities will enable you to meet your learning objectives. Include projects,
research, report writing, conversations, etc., which you will do while working, relating them to what you intend to
learn.
Teaching/Mentoring Activities: How your technical knowledge can be applied at the site of the internship. How you
can create value through mentoring/help people learn new things.
Off the job: List reading, writing, contact with faculty supervisor, peer group discussion, field trips, observations,
etc., you will make and carry out which will help you meet your learning objectives.
Evaluation: Your Internship supervisor will provide a written evaluation of your internship. Describe in detail what
other evidence you will provide to your faculty Mentor to document what you have learned (e.g. journal, analytic
paper, project, descriptive paper, oral presentation, etc.) Include deadline dates.

27
Part III: The Internship
Job Description: Describe in as much detail as possible your role and responsibilities while on your internship. List
duties, project to be completed, deadlines, etc. How can you contribute to the organization/site of internship.
Supervision: Describe in as much detail as possible the supervision to be provided/needed at the work site. List
what kind of instruction, assistance, consultation you will receive from whom, etc.
Evaluation: How will your work performance be evaluated? By whom? When?
Part IV: Agreement
This contract may be terminated or amended by student, faculty coordinator or work supervisor at any time upon
written notice, which is received and agreed to by the other two parties.
Student ___________________________________ Date ________________
Faculty Mentor _____________________________ Date ________________
Industry Supervisor _________________________ Date ________________

28
FORMAT 4: RELIEVING LETTER OF STUDENT
To
.......................................
.......................................
Subject: Relieving letter of student and Industry.
Dear Sir,
Kindly refer your letter/e-mail dated................ on the above cited subject. As permitted by your good self the following
students will undergo Industrial Internship in your esteemed organization under your sole guidance & directions:
S.No. Name of Students Roll No. Branch
This training being an essential part of the curriculum, the following guidelines have been prescribed in the curriculum
for the training. You are therefore, requested to please issue following guidelines to the concerned manager/Industrial
Supervisor.
1. Internship schedule may be prepared and a copy of the same may be sent to us.
2. Each student is required to prepare Internship diary and report.
3. Kindly check the Internship diary of the student daily.
4. Issue instruction regarding working hours during training and maintenance of the attendance record.
Youarerequestedtoevaluatethestudent’sperformanceonthebasisofgradingi.e.Excellent,VeryGood,Satisfactory
and Non Satisfactory on the below mentioned factors. The performance report may please be forwarded to the
undersigned on completion of training in sealed envelope.
S.No. Name of Students Evaluation Ranking
a Attendance and general behaviour
b Relation with workers and supervisors
c Initiative and efforts in learning
d Knowledge and skills improvement
e Contribution to the organization
Your efforts in this regard will positively enhance knowledge and practical skills of the students, your cooperation will
be highly appreciated and we shall feel obliged.
The students will abide by the rules and regulation of the organization and will maintain a proper discipline with keen
interest during their Internship. The students will report to you on dated.................... along with a copy of this letter.
Yours sincerely,
Training & Placement Officer

29
FORMAT 5: STUDENT’S DAILY DIARY/ DAILY LOG
DAY-1 DATE
Time of arrival Time of Departure Remarks
Deptt./Division Name of finished
Product
Name of HOD/
Supervisor
With e-mail id
Main points of the day
Signature of Industry Supervisor

30
FORMAT 6: SUPERVISOR EVALUATION OF INTERN
Student Name: _____________________________________________________ Date: __________________
Work Supervisor: ___________________________________________________Title: __________________
Company/Organization: _____________________________________________________________________
Internship Address: ________________________________________________________________________
Dates of Internship: From _____________________________ To ____________________________________
Please evaluate your intern by indicating the frequency with which you observed the following behaviors:
Parameters Needs
improvement
Satisfactory Good Excellent
Behaviors
Performs in a dependable manner
Cooperates with co-workers and supervisors
Shows interest in work
Learns quickly
Shows initiative
Produces high quality work
Accepts responsibility
Accepts criticism
Demonstrates organizational skills
Uses technical knowledge and expertise
Shows good judgment
Demonstrates creativity/originality
Analyzes problems effectively
Is self-reliant
Communicates well
Writes effectively
Has a professional attitude
Gives a professional appearance
Is punctual
Uses time effectively
Overall performance of student intern (circle one):
(Needs improvement/ Satisfactory/__________________Good/ _______________Excellent)
Additional comments, if any:
Signature of Industry supervisor________________________HR Manager _____________________________

31
FORMAT 7: STUDENT FEEDBACK OF INTERNSHIP (TO BE FILLED BY STUDENTS AFTER
INTERNSHIP COMPLETION)
Student Name:_ _____________________________________ Date:__________________________________
Industrial Supervisor:_ ________________________________ Title:__________________________________
Supervisor Email:____________________________________ Internship is: ______Paid_____Unpaid_______
Company/Organization:______________________________________________________________________
Internship Address:_________________________________________________________________________
Faculty Coordinator:__________________________________ Department:____________________________
Dates of Internship: From ______________________________ To____________________________________
***Please fill out the above in full detail***
Give a brief description of your internship work (title and tasks for which you were responsible):
Was your internship experience related to your major area of study?
_____________Yes, to a large degree______________Yes, to a slight degree____________No, not related at all
Indicate the degree to which you agree or disagree with the following statements.
This experience has: Strongly
Agree
Agree No Opinion Disagree Strongly
Disagree
Given me the opportunity to explore a
career field
Allowed me to apply classroom theory to
practice
Helped me develop my decision-making
and problem-solving skills
Expanded my knowledge about the work
world prior to permanent employment
Helped me develop my written and oral
communication skills
Provided a chance to use leadership
skills (influence others, develop ideas
with others, stimulate decision-making
and action)
This experience has: Strongly
Agree
Agree No Opinion Disagree Strongly
Disagree
Expanded my sensitivity to the ethical
implications of the work involved

32
Made it possible for me to be more
confident in new situations
Given me a chance to improve my
interpersonal skills
Helped me learn to handle responsibility
and use my time wisely
Helped me discover new aspects of
myself that I didn’t know existed before
Helped me develop new interests and
abilities
Helped me clarify my career goals
Provided me with contacts which may
lead to future employment
Allowed me to acquire information and/
or use equipment not available at my
Institute
In the Institute internship program, faculty members are expected to be mentors for students. Do you feel that your
faculty coordinator served such a function? Why or why not?
How well were you able to accomplish the initial goals, tasks and new skills that were set down in your learning
contract? In what ways were you able to take a new direction or expand beyond your contract? Why were some
goals not accomplished adequately?
In what areas did you most develop and improve?
What has been the most significant accomplishment or satisfying moment of your internship?
What did you dislike about the internship?
Considering your overall experience, how would you rate this internship? (Circle one).
(Satisfactory/ Good/ Excellent)
Give suggestions as to how your internship experience could have been improved. (Could you have handled added
responsibility? Would you have liked more discussions with your professor concerning your internship? Was closer
supervision needed? Was more of an orientation required?)

33
FORMAT 8 : PROFORMA FOR EVALUTION OF INTERNSHIP BY INSTITUTE
DEPARTMENT OF TRAINING AND PLACEMENT
Ph.____________________Fax____________________Email______________________________________

Evaluation (I)____________________________________________________________________________
1. Name of Student_______________________________________ Mob. No._________________________
2. College Roll No._
_______________________________________ University Roll No.__________________
3. Branch/Semester_
______________________________________ Period of Training___________________
4. Home Address with contact No._
___________________________________________________________
5. Address of Training Site:_________________________________________________________________
6. Address of Training Providing Agency:_______________________________________________________
7. Name/Designation of Training In- charge_____________________________________________________
8. Type of Work__________________________________________________________________________
9. Date of Evaluation______________________________________________________________________
a) Attendance: _ (Satisfactory/ Good/ Excellent)
b) Practical Work: __ (Satisfactory/ Good/ Excellent
c) Faculty’s Evaluation: _ (Satisfactory/ Good/ Excellent)
d) Evaluation of Industry: ___ (Satisfactory/ Good/ Excellent)
Overall grade: (Satisfactory/ Good/ Excellent)
Signature of Faculty Mentor Signature of Internship Supervisor (Industry)

With date and stamp
*Photocopy of the attendance record duly attested by the training in-charge should be attached with the
evaluation Proforma.

34
FORMAT 9: INTERNSHIP EVALUATION REPORT
(For 4 years Degree Programme. / M.Tech. & MBA )
Name & Address of Organization
___________________________________________
___________________________________________
___________________________________________
Sr. No.
Name of
Student
Roll No. Marks to be awarded by
OVER ALL
GRADE
Punctuality
Grade
(Satisfactory/
Good/
Excellent)
Maintenance of
Daily Diary
Grade
(Satisfactory/
Good/
Excellent)
Skill Test
Grade
(Satisfactory/
Good/
Excellent)

35
FORMAT 10: ATTENDANCE SHEET
(For 4 years Degree Programme. / M.Tech. & MBA )
Name & Address of Organization
___________________________________________
___________________________________________
___________________________________________
Name of Student
Roll. No
Name of Course
Date of Commencement of Trg.:
Date of Completion of Training:
Initials of the student
Month
& Year
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Note :
1. Attendance Sheet should remain affixed in Daily Training Diary. Do not remove or tear it off.
2. Student should sign/initial in the attendance column. Do not mark ‘P’
3. Holidays should be marked in Red Ink in attendance column. Absent should be marked as ‘A’ in Red Ink.
Signature of Company internship supervisor
with company stamp/ seal
(Name_________________________________________) Contact No.

36

ALL INDIA COUNCIL FOR TECHNICAL EDUCATION
Nelson Mandela Marg, Vasant Kunj, New Delhi-110070

AICTE's comprehensive guide to internship policy

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (20)

Similaire à AICTE's comprehensive guide to internship policy

Similaire à AICTE's comprehensive guide to internship policy (20)

Plus de Janak Valaki (PhD)

Plus de Janak Valaki (PhD) (20)

Dernier

Dernier (20)

AICTE's comprehensive guide to internship policy