Crystal awards and glass awards from Silver Trophy, ideal corporate awards for your business or organization. Glass & crystal awards make great corporate awards and trophies For more information please visit our website: http://www.silvertrophy.com/corporate-awards/crystal-glass-corporate-awards.html

1. How to Maintain and
keep clean Your Glass
Awards and Crystal
Trophies

2. Looking at an exhibition of glass awards and
crystal trophies always invokes feeling of pride
inside recipient. When those hard-earned glass
awards and crystal trophies are dirty or show
indications of damage and wear, however, you
should consider cleaning them.

3. It isn't really difficult to restore the glass awards
and crystal trophies with their original luster,
however, or otherwise make sure they are shine
and sparkle again. It takes only a few elementary
cleaning supplies and repair materials. To
completely clean them, have a soft rag (a classic
t-shirt will be perfect). Usually do not apply any
cleaner towards the rag yet; rather, utilize one
the main dry rag to remove the counter dirt from
the trophies themselves and also the base, if
there is one.

4. Now, take your still-dry rag and vigorously shake it
out. This will likely remove any loose dust and dirt
that accumulated through the "dry run". Then, go
to a completely clean the main rag. Now, you are
prepared to use your cleaner. However, you do not
be using the cleaner right to your glass awards
and crystal trophies. Rather, you will spray the
cleaner directly on the cloth, and then wipe it on
top of the Corporate Awards.

5. A commercial glass cleaner for example Windex
is fine, however it should not be multi-surface
cleaner, set up label says it can be streak-free
and can be used on glass. In this case, it may
harm the etching. If you need to consider using
a multi-surface cleaner, however, execute a
spot-test first, both about the glass awards and
crystal trophies and also the engraving.

6. Plain white wine vinegar combined with water is
a good cleaner. It can be slightly acidic, so
ensure you dilute it. If you utilize a spray
container to use it, put going to 1/3 cup of
vinegar inside the bottle, then finish filling the
container with water. Shake it well, and then
squirt it about 2-3 times in a trash can. This can
ensure that the vinegar and water have
thoroughly mixed together.

7. Should your glass awards and crystal trophies are
placed on wooden bases; utilize same cleaner to
carefully clean them. When the bases are getting
to be scratched or nicked, a furniture scratch
remover, such as Old English, should pay for it
nicely. If you’re made of a similar material as the
award itself and has been nicked or scratched,
professional repairing may be required. So, avoid
being shy. In the end, you earned each one from
the glass awards and crystal trophies you might
have.

8. Your professional glass awards and crystal
trophies designer would be wise to provide
proofs of your respective design before the
engraving process. Examining the proofs closely
as well as in a timely fashion is the responsibility
and in what way you'll be able to keep your final
product meets your expectations.

9. Often times, the structure company will not likely
move ahead without your approval in the proofs,
so and soon you provide word; your order won't
be completed. It is advisable to execute the proof
approval process in order to have your glass
awards and crystal trophies carried out in time
for the event.

10. By working this closely with you, an award design
company proves their commitment to excellence
and professional service. By working this closely
using your award design company, you provide
the crooks to perform the best when producing
your custom glass awards and crystal trophies.

11. PICTURES