TX MS-1 series Brinell Indentation Measurement System with advanced visual technology to shoot the indentation by CCD camera lens, recognizing and measuring the diameter of the indentation automatically on laptop, and then show the Brinell hardness value of the workpiece on the display directly. It is usually used on site with other Brinell hardness test equipment together. Measurement process efficient, simple, objective, and reliable.

2. MS-1 Brinell Indentation Measurement System 21 MS-1 Brinell Indentation Measurement System
1. Hardware requirements:
CPU: Basic frequency >2G (recommend)
Internal storage：Capacity >2G (recommend)
2. Systemrequirements:
indows XP sp3 or windows7, Windows8W
3. Installation:
Double click the“Indentation Measuring System.exe”(As
shown in figure 1）
Go to next step you will see the installation interface as shown in
figure 2.
And then go to next step you will see figure 3 installation interface.
Figure 1: Installation Document
Figure 2: Installation Interface
Figure 3: Installation Interface
there is a icon of Indentation Measurement System (as shown in
figure 4). Installation finish.
Agree with the License Agreement, and always next step until
Figure 4: Installed exe
4. Operation Method:
click the shortcut of “Indentation Measuring System.exe” to enter
into this system.(as shown in figure 5)
First to insert the soft dongle and camera, and then double
Figure 5: Software running interface