GSM\'s capabilities in the industrial ventilation and air pollution control markets

1. Industrial Ventilation and Air
Pollution Control Services
• Industrial Ductwork Design
• Fabrication Services
• Turn-key Installation Services
• Access Platforms, Stairs and Ladders
• Structural Steel
• Make-Up Air Systems
• Exhaust Gas Recirculation
• Heat Recovery
• EPA Method 204 PTEs

2. This is What GSM Industrial Offers:
• General Contracting to Integrate Your Air
Pollution Control Devices and/or Manufacturing
Equipment
•OEM Subcontracting
• In-house Design, Fabrication, and Installation
Services

3. Industrial Ventilation
• Fugitive Emission Capture Systems:
o Hoods, Floor Sweeps
oEPA Method 204 Permanent Total
Enclosures (PTE)

4. Industrial Ventilation
• Air Make Up Systems
• Fugitive Emission Capture Systems
• Air Handling Systems

5. Industrial Ventilation
• Particulate Control Systems
• Oil Mist Collectors/Separators
• Custom-designed Systems

6. Equipment Installation Services
• Particulate Control:
o Bag Houses
o Cartridge Collectors
o Cyclones
• VOC/HAP Control
o RTO’s
o Catalytic Oxidizers

7. Industrial Ductwork
• Design, Fabrication, Installation
• Duct Sizing via System Loss Analysis
• Light to Heavy Gage Designed to SMACNA and
ASHRAE Specifications
• Fugitive Emission Capture Systems:
o Hoods, Floor Sweeps
o Permanent Total Enclosures (PTE)

8. Fabrication Capabilities:
• Over 110,000 sq. feet of fabrication floor space
•In-house sand/media blasting
•In-house large, drive-through, blast and paint
booths.
•Industrial Ductwork: light Gage Through 1-inch
thick
• Refractory Linings
• Bag Houses, Cyclones, etc.
• Build to Print, or Design from Scratch
• Access Platforms, Stairs and Ladders
• Structural Steel
• Make-Up Air Systems

9. Fabrication Capabilities:
• AWS Certified Welders
• 10 Over-head bridge cranes
• Over 20-feet to the bottom of the hook on all
bridge cranes
• Cyclones, bag houses, etc.

10. Fabrication Capabilities:
• Internal insulation: ceramic fiber, refractory
linings, etc.
• Expertise in welding various allows; cor-ten,
SS310, 253MA, Inconel/Monel, etc.
• Large steel stacks and test platforms
• Large diameter ductwork; up to 16-feet diameter

11. Emission Stacks
• Vortex Shedding Analysis
• Active/Passive Vibration Damping
o Helical Strakes
oTuned Mass/Liquid-filled Dampers

12. Custom Fabrication Services
• Exhaust Gas Recirculation
• Heat Recovery
•Internal/External Insulation

13. Design Services
• AutoCAD 2D and 3D (Inventor)
• Procurement of Field Measurements
• General Arrangement Drawings

14. Turnkey Projects
• Expert Project Managers
• Professional Field Crews
• Cradle to Grave Project Management

15. www.gsmIndustrial.com
John Kleinfelter
Vice President – Field Services
Direct: 717-207-7765
Mobile: 717-725-7885
3249 Hempland Road
Lancaster, PA 17601
jkleinfelter@gsmIndustrial.com