Fully Fashion Knitwear

Fully Fashion Knitwear
Introduction: based on fabric construction and manufacturing garment.
Q- What is weaving and its types?
Weaving: Interlacement of two sets of yarn at right angle which form a structure is
called weaving.
Basic weave are 3 types:
1. Plain weave
2. Twill
3. Sateen & Satin
Knitting: It is a process of fabric manufacture by converting yarn into loop form and
then these loops interlock/intermesh/interlooped together which form a structure is
called knitting or knitted structure.
Or.
Interlocking of loops which form a structure is called knitting.
www.AssignmentPoint.com
Apparel sector
Woven Knitwear
Cut and Sew
T-Shirt
Polo Shirt
Fully Fashion
Sweater
Cardigan
Pullover
LoopYarn
Wales
Course
Knitted Structure

Wales: vertical column of knitted fabric.
Course: horizontal column of knitted fabric.
Loop: bending of yarn is called loop.
WPI = Wales per Inch CPI = Course per Inch

KnittedStructure
WarpknittedstructureWeftknittedstructure
CircularknittingFlatbedknitting
SmalldiaM/CCircularknitting
Fabricforclothinglike:
>Ribknittedstructure
>DoubleJersey/interlock
>LactoseorPique
T-shirt,Polo-shirt,Briefs.
HandDriven
>Drivenmanually
>Canproducelimiteddesign
>Lowvolumeproduction
>Integratedgarmentnot
possible
PowerDriven
>Drivenbypower
>Unlimiteddesign
>Highvolumeproduction
>Integratedgarment
possible
Socks
Sweater,Pullover,
Cardigan
TricotRachel
Endproduct
Mostlynon-apparelitems
>Mosquitonet
>Meshfabric
>Powernet
>Fishnet
>Lacesetc.

What is fully Fashion?
Fully fashioning is a method/technique of shaping a knitted structure by increasing or
decreasing the number of Wales or needles.
 What are the Advantages & Disadvantages of Fully Fashioning?
Advantage:
1. Production is effective (Less manpower in design or pattern sector)
2. Zero wastage
3. Sealed/Finished edge garment or quality edge garment.
Disadvantage:
Low volume of production (For needle increasing or decreasing)
 Textiles: Anything that can be originated/generated from fiber.
 Clothing: Ready to wear
 Fiber: Fibers are natural or chemical structure that can be spun into yarn.
Sleeve
panel by
increasin
g
Body
panel
Increase (+)
Decrease (-)
Body
panel
Decrease (-)
Spinning process/
Giving twisted
Yarn

 Classic Functions of Textile fiber: Based on sourcing-
 Circular knitting: Needles are arranged in circular way that why is called
circular knitting. Two types of needle bed are used in circular knitting machine.
1. Dial needle bed &
2. Cylinder needle bed
 Fabric: Fabric is an assembly of fiber or yarn which form a structure and which
has length, width and thickness.
 Dia: Maximum distance inside the circular is called dia.
 Gauge: Gauge indicates the thickness.
 Flatbed: Needle are arrange in flat way is called flatbed or V-bed.
Textile fiber
Natural Chemical/man-made
Animal Plant/Vegetable
CottonWool
Acrylic
Dial needle bed (Horizontal way)
Cylinder needle bed (Vertical way)
Technical Back
Technical front
1. Hand driven
2. Power Driven

Fibers Properties
1. Mechanical Process: This is the response to applied forces and recovery like-
 Abrasion resistance
 Flexibility
 Stress
2. Absorption properties: This is a measure of the quantity of water vapor or liquid water or
absorbed by fabric.
 Water vapor absorption
 Water absorption
3. Thermal properties: The behavior of textile in the presence of heat or when exposed to a
flame.
 Heat resistance capacity or
 Specific heat
Fibers Identification
Test Wool Acrylic Cotton
Burning test/
Flammable test
Non-flammable,
Hair burn smell
Flammable
Petroleum flame
Flammable
Paper burn smell
Microscopic test
(Cell structure of yarn)
Chemical test
(acid & alkalis)
wet finish
Acid (+)
Alkalis (-)
Acid (+)
Alkalis (+)
Acid (-)
Alkalis (+)
Based on fibers length:
Fiber
Staple Filament
Short staple Long staple
WoolCotton
Acrylic & others
(1.27cm - 6.34 cm) (3.8cm - 38cm)
(0-2000meter or more)

Textile Yarn: Twisted form of fibers is called yarn.
According to ASTM (American Society for Testing & Material) A generic term for a
continuous stand of textile fibers is called yarn.
Classification of Textile yarn:
3. Staple:
Textile yarn
Spun yarn Filament yarn
Simple Complex/
Novelty/
Fancy
Single Plied
Cords Cables
Mono Multi
Flat Twisted
1. Mono filament:
2. Multi filament:
4. Two ply yarn:

Spun yarn: Spun yarn are made by twisting together of fibers.
Filament yarn: Filament yarns are made by the assembly of continuous filament.
Mono-filament: Consists of only a single continuous.
Multi filament: Made from multiple filaments.
Complex/Novelty/Fancy: This has special effects on its own appearance.
Cords: cords are made by twisted plied yarn.
Cables: Cables are produced by plying cords.
Slub yarns: Contains partially bulky/fluffy region.
Loop yarns: This yarn requires a base yarn (core yarn) around which the fancy or
effect yarn is wrapped.
8. Loop yarn:
5. Multi ply:
7. Cable:
6. Cords:

Common yarn used in the fully fashioned knitwear like-
Basic type:
 100% Acrylic
 Acrylic mélange
 Blended Acrylic
 100% wool
 Mixed wool
 100% cotton
 Blended cotton
Fancy type:
 Chenille
 Angora tweed
 Nep/slub yarn
 Loop yarn (Popcorn, Boucle)
 Mohair
 Tape yarn
 Kashmere like etc.
SMM = Spinning Metric Measurement
DMM = Dyeing Metric Measurement
Properties of Yarn
Wool:
 Bulky/fluffy appearance
 Poor strength
 Good resistance to acid
 Poor resistance to sun-light and insects
 End use for sweater and suiting
 Mainly fibers collects from sheep fleece
 Garment become heavier and also more weighted
 Garment appearance is not shine
 More expensive product
 Warmth feelings

Acrylic:
 Sources are Acrylonitrille – Ethylene or Acetylene
 Bulky/fluffy appearance like wool
 More shiny than wool
 Good strength
 Light in weight
 Good resistance to sun-light and insects
 Wet finish & dry finish applied
 End uses heavy knitwear product
 Less expensive than wool
 Warmth feeling
Cotton yarn:
 Smooth surface
 Cool feeling (suitable for hot)
 More expensive
 Moisture absorbency high
Chenille Yarn:
> Source – Cotton chenille Acrylic chenille
Types of Chenille:
 Lurex
 Rayon
 Rainbow
 Feather
 Space dyed
Characteristics of Chenille:
 Non-washable
 Non-twistable
 Velvety appearance
 Suitable for ladies & babies wear
Kashmery yarn:
 Non-washable
 Silky appearance
 Collected from Kashmeri goats
 Light strength
Hard & less velvety Soft & more velvety

Production sequence of fully fashion knitwear (Sweater):
Yarn (Receive from textile)
Store / Warehouse
Winding section
Yarn cone distribution section
Knitting section
Linking section
Linking continue/Trimming section
Mending section
Washing section
Drying section
Pressing & ironing
Finishing section
Yarn inspection by random process
Knitting inspection
Linking inspection
Light check inspection
Button hole Labeling like-
Main label
Size label
Care label
Folding Quality audit
by internal
expert/quality
circle team
Final pack Ready for
export
Button attach
(If required)
Price tag/
Hang tag
Primary
packaging
Secondary/
Packagin
Final inspection by
buyer’s
representative
using AQL chart

Activities for yarn receive:
Receive yarn by package
. Hank form – Cotton yarn
. Cone form – Accept cotton yarn
Warehouse activities
. Random inspection
. Weight
. Lab dips color match
Winding Section:
. Covert yarn from hank to cone
. For easy knitting
. Number of cone depends of ply
Wastage % of yarn depends on some factors:
• For normal gauge except Chenile yarn wastage % = 4%
• For fine gauge except Chenile yarn wastage % = 5%
Different types of stitches & designs used in Fully Fashion knitwear:
Basic Category: Fancy Category:
 Single Jersey
 Rib category stitch
 Double Jersey
Shaker or Half Cardigan stitch
 Full Cardigan stitch
 Drop knit
 Tuck Stitch
 Milano Stitch
 Poinal Stitch
 Zigzag Stitch
 Cables (Different types)
 Diamond (Different types)
Wastage
Production Merchandising
3G 5G 7G
Normal/Regular gauge
10G 12G
Fine gauge

Single Jersey
Common Name: Jersey stitch, Single Knit, Basic Type Stitch, Plain Knit etc.
Priorities of Single Jersey:
1. Appearance: Different appearance in alternate side.
 Technical Front – Look like V-shape stitch/jersey stitch
 Technical Back – look like Semi-circle stitch/purl stitch
Stitch diagram of Single Jersey:
T/B
()
()
()
()T/F V V V V
Loop diagram of Single jersey:
Technical Face: Technical Back:
2. Edge Curling: Curling produce for yarn tension/torque.
To reduce edge curling-
 For Heavy knitting – After knitting before linking use Iron at the edge.
 For light knit – After knitting before sewing use Iron at the edge.
Technical Back
Technical front
Needle Diagram

3. Dimensional Stability: Dimensional stability is poor of single jersey.
To increase dimensional stability:
 Increase Loop density
 Apply resin finish
4. Unraveled: We can unravel the yarn from the both end.
5. Elasticity: Good elasticity in width wise direction.
6. Laddering: Laddering can be repaired in flat bed knitting but not in circular knitting.
Cause of laddering:
> Needle Head Broken
> Poor Quality materials
> Lose tension
7. Density: The density of single jersey is light.
8. End uses: All basic sweaters, cardigans, pullovers for heavy knit.
Basic T-shirt, polo shirt for light knit.
9. Diagram & Notation:
Needle Diagram Stitch Diagram Notation
T/
B
()
()
()
()
T/F V V V V
T/
B
O
O
O
O
T/F × × × ×
Pull Pull

Rib Knitted Structure
The word ‘rib’ derives from animal ribs. In this structure needles head are no t facing directly
each other. Rib fabrics are composed of loops formed in opposite direction. Various types rib
construction are there but common structure are 1×1 & 2×2 and above 2×2 construction like
3×3, 4×4, 5×5 are Fancy rib but 6×6 rib has special name like Derby rib.
Priorities of Rib:
1. Appearance: Both sides should be same in appearance but semi circle loops observe in
between ‘V’ shape loops.
Stitch diagram of Single Jersey:
T/B
()
V () V
T/F V
()
V ()
Loop diagram of 11 Rib:
2. Edge curling: This fabric does not curl at the edges. It is a balance fabric because of
having Wales in both directions. The reason is both T/F and T/B bed are active, so tension
is uniform on both sides.
3. Dimensional stability: Dimensional stability is good.
4. Unraveled: We can unrope the structure from the end section only (because it forms from
double bed).
5. Elasticity: Elasticity can be observed well in widthwise direction.
6. Laddering: Laddering can be repaired in flat bed knitting but not in circular knitting.
7. Density: Density is heavier than single jersey because loops catch at both sides.
End Uses:
 Bottoms, collar, cuff, hem and for also for full dress.
Technical Back
Technical front
Needle Diagram: 1×1 rib

 Especially lightweight for undergarments because elasticity is good.
T/
B
()
V
()
V
T/F V
()
V
()
T/B    
T/F    
Double Jersey
If the plain stitches are one behind the other the fabric/ structure is known double jersey.
Needle diagram of Double Jersey:
Properties/Identification:
1) Appearance: Both sides are same in appearance. Both technical front and technical back has V
shape stitch/ jersey stitch.
Stitch diagram of Double Jersey:
T/B V V V V
T/F V V V V
Loop diagram of Double jersey:
2) Edge curling: This fabric also does not curl at the edges. Reason is that it is more balanced
fabric because all needles are active on both sides (T/F and T/B bed). So tension is uniform on
both sides.
T/F
T/B

3) Dimensional stability: Dimensional stability is very good.
4) Unraveled: We can unrope the structure from the end section only (because it forms from
double bed).
5) Elasticity: In comparison to other knit fabric; (especially rib) elasticity is poor.
 Laddering: Laddering can not be repaired in both flat bed knitting and circular knitting.
Because both side needles are active at opposite direction.
 Density: In comparison to other knit fabric; density is heavier.
End Uses:
 Normally for heavy knitwear Vast because it is fitted.
 Light knitted is preferred for sportswear (sports T-shirt) because it absorbs sweat well and
dimensional stability is good.
 For ladies skirt. And also for tube fabric to make pocket.
T/B V V V V
T/F V V V V
T/B    
T/F    

Differences between Single jersey and Rib knit:
Key Words Single Jersey Rib Knit
1. Appearance
T/F has V shape stitch and T/B
has semi circle stitch.
Semicircle loops can be observed
in between V shape loops at both
sides.
2. Edge curling Edge curling occurs. Edge curling does not occur.
3. Dimensional Stability
Dimensional stability is
comparatively poor.
Dimensional stability is good.
4. Unraveled
Can be unroped the yarn from
the both end.
only the end section.
5. Elasticity
Almost equal elasticity both in
lengthwise and widthwise
direction.
Elasticity can be observed well in
widthwise direction.
6. Needle Bed
Manufacturing by using only
T/F needle bed.
Manufacturing by using both T/F
and T/B needle bed.
7. Density Density is lighter than Rib knit.
Density is heavier than single
jersey
8. End uses
All basic sweaters, cardigans,
pullovers for heavy knit.
Basic T-shirt, polo shirt for light
knit.
Bottoms, collar, cuff, hem and for
also for full dress.
Especially lightweight for
undergarments because elasticity
is good.
9. Fabric Notation
T/B    
T/F    
T/B    
T/F    
10. Needle Set
Made by one set of needle; i.e.
cylinder needle. (In case of
circular knitting)
Made by two set of needle; i.e.
dial needle and cylinder needle.
(In case of circular knitting)
Similarities between Single jersey and Rib knit:
1) Both is mandible (Laddering can be repaired)

Differences between Single jersey and Double Jersey:
Key Words Single Jersey Double Jersey
1. Appearance
T/F has V shape stitch and T/B
has semi circle stitch.
Both T/F and T/B has V shape
stitch.
2. Edge curling Edge curling occurs. Edge curling does not occur.
3. Dimensional Stability Dimensional stability is poor.
Dimensional stability is very
good.
4. Unraveled
the both end.
Can be unroped the yarn from the
end section only.
5. Elasticity
Elasticity is better than double
jersey.direction.
Elasticity is poor.
6. Needle Bed
Manufacturing by using only
T/F needle bed.
Manufacturing by using both T/F
and T/B needle bed.
7. Density
Density is lighter than double
jersey.
Density is heavier than single
jersey.
8. Laddering
It is mandible (Laddering can be
repaired)
It is not mendable (Laddering
can’t be repaired
9. Hand Feel It is comparatively soft It is comparatively hard.
9. End uses
All basic sweaters, cardigans,
pullovers for heavy knit.
Basic T-shirt, polo shirt for light
knit.
> Normally for heavy knitwear
Vast because it is fitted.
> Light knitted is preferred for
sportswear (sports T-shirt)
because it absorbs sweat well and
> For ladies skirt. And also for
tube fabric to make pocket.
10. Fabric Notation
T/B
T/F Í Í Í Í
T/B Í Í Í Í
T/F Í Í Í Í
11. Needle Set
Made by one set of needle; i.e.
cylinder needle. (In case of
circular knitting)
Made by two set of needle; i.e.
dial needle and cylinder needle.
(In case of circular knitting)
Note: No similarities between Single Jersey & Double Jersey.

Differences between Rib and Double Jersey:
Key Words Rib Double Jersey
1. Appearance
Have semi-circle loops in
between V shape stitches at both
sides.
Do not have semicircle loops;
only V shape stitches at both
sides.
2. Elasticity Elasticity is good. Elasticity is poor.
3. Density
Density is lighter than double
jersey.
Density is heavier than Rib.
4. Dimensional Stability Dimensional stability is good.
Dimensional stability is better
than rib.
5. Laddering
It is mendable (Laddering can be
repaired)
It is not mendable (Laddering
can’t be repaired)
6. Needle active
All needles are not active of both
beds.
All needles are active of both
beds.
7. End uses
Bottoms, collar, cuff, hem and
for also for full dress.
Especially lightweight for
undergarments because elasticity
is good.
> Normally for heavy knitwear
Vast because it is fitted.
> Light knitted is preferred for
sportswear (sports T-shirt)
because it absorbs sweat well and
> For ladies skirt. And also for
tube fabric to make pocket.
8. Fabric Notation
T/B Í Í
T/F Í Í
T/B Í Í
T/F Í Í
Similarities between Rib and Double Jersey:
1) Both side same in appearance.
2) Can be unroped the yarn from only the end section.
3) Edge curling does not occur.
4) Both are double bedded structure. Manufacturing by using both T/F and T/B needle bed.
5) Made by two set of needle; i.e. dial needle and cylinder needle.

PROCESS BREAKDOWN OF FULLY FASHIONED KNITWEAR
Body Panel (Front or Back):
Needle select for bottom rib by needle selector; i.e. 1×1 rib or 2×2 rib
Prepare rib height
(as per requirement)
By giving courses
Loop transfer from back needle bed to front needle bed
(if the body panel is in jersey)
By transfer comb
Knit upto armhole starts point
Create armhole
(depends on styling)
By decreasing or increasing, decreasing both.
Sleeve Panel:
Needle select for cuff rib by needle selector; i.e. 1×1 rib or 2×2 rib
Prepare rib height
(as per requirement)
By giving courses
Loop transfer from back needle bed to front needle bed
(if the sleeve panel is in jersey)
By transfer comb
Knit upto armhole line starts point
Linking:
Linking right shoulder
Attach collar rib
Link left shoulder
Attach sleeve panel
Side seam close
End of operation

Fully Fashion Knitwear

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (20)

En vedette

En vedette (20)

Similaire à Fully Fashion Knitwear

Similaire à Fully Fashion Knitwear (20)

Dernier

Dernier (20)

Fully Fashion Knitwear