Ignition system takes the responsibility of starting your vehicle by generating the required energy-- And keeps it moving till you take the keys out from the ignition. But the system is always dependent upon the vehicle battery which first helps to provide the initial voltage of 12 volt. And this 12 volt is stepped up to 30,000 volts through the transformer like element ignition coil. Go through the slides to know clearly how all these processes happen?

3. The efficiency of the ignition system not only makes the
vehicle to keep running but also
 Increase engine performance
 Better fuel efficiency
 Less emission

5. 


8. The ignition system always depends on the vehicle battery
that helps to create a spark to starts the engine ..

9. If the ignition system misfires, then it can affect the
performance as well as, gas consumption and increased
emission..

11. Ignition Key :

12. Storage battery :

13. Supplies the necessary current to the ignition
system and that is 12 volts power, the exact
amount needed to start the engine….

14. Ignition Coil:

15. The coil increases the voltage from 12 volts to 25-
30,000 volts…

18. The secondary winding circuit transports the
generated energy to the distributors…

19. Distributor:
The distributor sends the high voltage current to the
spark plug at right time to start the spark …

20. Distributor Cap and rotor :

23. Spark Plug and wires :

24. The generated energy of spark plugs and spark wires are
between 40.000 – 100,000 volts …

27. Types of ignition
system
Electronic Ignition
Distributor-less
Ignition