1. What is WAS
à Provides the infrastructure for running applications that run your business.
à Common environment and programming model for your applications.
àPlatform for developing and Deploying web services and SOA based apps
à Secure, Scalable, reliable transaction engine for ERP
à IBM WebSphere is architected to enable you to build business-critical applications
for the Web
à WebSphere includes a wide range of products that help you develop and serve
Web applications.
à They are designed to make it easier for clients to build, deploy, and manage
dynamic Web sites more productively
à WAS implements J2EE specification
WebSphere Application Server provides the environment to run your Web-enabled e-
business applications. An application server functions as Web middleware or a middle
tier in a three-tier e-business environment. The first tier is the HTTP server that
handles requests from the browser client. The third tier is the business database (for
example, DB2 UDB for iSeries) and the business logic (for example, traditional
business applications, such as order processing). The middle tier is WebSphere
Application Server, which provides a framework for a consistent and architected link
between the HTTP requests and the business data and logic.

2. With the Base and Express packages, you are limited to single application server
environments. The Network Deployment package allows you to extend this
environment to include multiple application servers that are administered from a
single point of control and can be clustered to provide scalability and high availability
environments.
The typical application flow is as follows:
1. A Web client requests a URL in the browser (input page).
2. The request is routed to the Web server over the Internet.
3. The Web server immediately passes the request to the Web server plug-in.
All requests go to the Web server plug-in first.
4. The Web server plug-in examines the URL, verifies the list of host name
aliases from which it will accept traffic based on the virtual host information,
and chooses a server to handle the request.
5. A stream is created. A stream is a connection to the Web container. It is
possible to maintain a connection (stream) over a number of requests. The
Web container receives the request and, based on the URL, dispatches it to
the proper servlet.
6. If the servlet class is not loaded, the dynamic class loader loads the servlet
(servlet init(), then doGet() or doPost()).
7. JNDI is used for lookup of either datasources or EJBs required by the servlet.
8. Depending upon whether a datasource is specified or an EJB is requested,
the JNDI directs the servlet:
– To the corresponding database and gets a connection from its connection

3. pool in the case of a data source.
– To the corresponding EJB container, which then instantiates the EJB when
an EJB is requested.
9. If the EJB request involves an SQL transaction, it goes back to the JNDI to
look up the datasource.
10.The SQL statement is executed and the retrieved data is sent back either to
the servlet or to the EJB.
11.Data beans are created and handed off to JSPs in the case of EJBs.
12.The servlet sends data to JSPs.
13.The JSP generates the HTML that is sent back through the plug-in to the Web
server.
14.The Web server sends the output page (output HTML) to the browser.
Functionality of WAS
WebSphere Application Server supports asynchronous messaging through the use
of a JMS provider and its related messaging system.(JMS 1.1 Messaging
Provider)
WebSphere Application Server provides authentication and authorization
capabilities to secure administrative functions and applications, using LDAP
WebSphere Application Server works with a Web server (such as the IBM HTTP
Server) to route requests from browsers to the applications that run in
WebSphere Application Server. Web server plug-ins are provided for
installation with supported Web browsers. The plug-ins direct requests to the
appropriate application server and perform workload balancing among servers
in a cluster.
Web services enable businesses to connect applications to other business
applications, deliver business functions to a broader set of clients and
partners, interact with marketplaces more efficiently, and create new business
models dynamically.
Delivers a high performance and extremely scalable transaction engine for
dynamic e-business applications
Packaging
WebSphere Application Server is available in multiple packaging options.
WebSphere Application Server - Express V6.0
à Single Server environment.(No Clustering or multi server management)
à J2EE 1.4 support
àMedium-sized business

4. àContains Rational Web Developer application tool
à Doesn’t handle EJB and JCA
à Limited to 2 CPU’s
WebSphere Application Server V6.1 (Base)
àSlightly differs in packaging and licensing
à Contains Application Server toolkit
à Includes a trial version of Rational Application Developer
àUnlimited CPU’s
WebSphere Application Server Network Deployment V6
àExtends Base version
àClustering capabilities
àEdge Components which provide high performance and availability (Caching Proxy
and Load Balancer)
àHA for distributed configurations
àLarge Enterprise applications
àScalability, Availability and Performance
àWeb Server plug-in supports weighted WLM
àAll V6 application servers have the same core and base functionality
àWebSphere Application Server - Express V6 node can be upgraded to a WebSphere
Application Server V6 node(.Can be done without any software upgrades .Only a
paper license upgrade is required)
àWebSphere Application Server- Express V6 and WebSphere Application Server V6
node can be federated into a WebSphere Application Server - Network Deployment
V6 cell (Can be done without any software upgrades .Only a paper license upgrade is
required)
Differences b/n WAS Version
WAS 5: J2EE 1.2/1.3 support
JDK 1.3 support
Web Services based on Apache engine
WAS 6.0: J2EE 1.2/1.3/1.4 support
JDK 1.4 support (JDK 1.4.2)
Web Services based on J2EE 1.4
High Availability Manager
Java Based Messaging Engine

5. EJB 2.1, JMS 1.1, JCA 1.5, Servlet 2.4, and JSP 2.0
Supports Java Server Faces (JSF)
Creates Archive of the existing WAS configurations and the archive can
be
used to create new configurations.
Profiles and all profiles use same WebSphere binaries(Less storage)
Node groups
Service integration functionality provides both message-oriented and
service
Oriented applications
WAS 6.1: J2EE 1.2/1.3/1.4 support
JDK 5.0 support
JSF-a framework for Web applications
Integrated Console
Security changes
Secure and Scalable runtime
Edge Components
Using Edge components can reduce Web server congestion, increase content
availability, and improve Web server performance. As the name indicates, Edge
components usually run on machines that are close (in a network configuration
sense) to the boundary between an enterprise’s intranet and the Internet.
Web container
àA Web container, which processes HTTP requests, servlets, and JavaServer Pages
(JSPs)
à Web container transport chains:
Requests are directed to the Web container using the Web container inbound
transport chain. The chain consists of a TCP inbound channel that provides the
connection to the network, an HTTP inbound channel that serves HTTP 1.0 and 1.1
requests, and a Web container channel over which requests for servlets and JSPs are
sent to the Web container for processing
à Servlet processing
When handling servlets, the Web container creates a request object and a response
object, then invokes the servlet service method. The Web container invokes the
servlet’s destroy method when appropriate and unloads the servlet, after which the
JVM performs garbage collection.
à HTML and other static content processing
Requests for HTML and other static content that are directed to the Web container
are served by the Web container inbound chain. However, in most cases, using an
external Web server and Web server plug-in as a front-end to a Web container is
more appropriate for a production environment.

6. _
àSession management
Support is provided for the javax.servlet.http.HttpSession interface as described in
the Servlet application program interface (API) specification.
_
à Web services engine
Web services are provided as a set of APIs in cooperation with the J2EE applications.
Web services engines are provided to support Simple Object Access Protocol (SOAP).
EJB Container
àThe Enterprise JavaBeans (EJB) container provides all the runtime services that are
needed to deploy and manage enterprise beans. It is a server process that handles
requests for both session and entity beans.
àThe enterprise beans, packaged in EJB modules, installed in an application server
do not communicate directly with the server. Instead, the EJB container provides an
interface between the enterprise beans and the server. Together, the container and
the server provide the enterprise bean runtime environment.
àThe container provides many low-level services, including threading and
transaction support. From an administrative viewpoint, the container manages data
storage and retrieval for the contained enterprise beans. A single container can host
more than one EJB Java archive (JAR) file.
WAS Services
J2EE Connector Architecture services
Transaction service
Dynamic cache service
Message listener service
Object Request Broker service
Administrative service (Java Management Extensions)
Diagnostic trace service
Debugging service
Name service (Java Naming Directory Interface)
Performance Monitoring Interface service
Security service (JAAS and Java 2 security)
Service Integration Bus service
The Web server:
A Web server handles the HTTP protocol. When the Web server receives an HTTP
request, it responds with an HTTP response, such as sending back an HTML page. To
process a request, a Web server may respond with a static HTML page or image,
send a redirect, or delegate the dynamic response generation to some other program
such as CGI scripts, JSPs (JavaServer Pages), servlets, ASPs (Active Server Pages),
server-side JavaScripts, or some other server-side technology. Whatever their

7. purpose, such server-side programs generate a response, most often in HTML, for
viewing in a Web browser.
Understand that a Web server's delegation model is fairly simple. When a request
comes into the Web server, the Web server simply passes the request to the
program best able to handle it. The Web server doesn't provide any functionality
beyond simply providing an environment in which the server-side program can
execute and pass back the generated responses. The server-side program usually
provides for itself such functions as transaction processing, database connectivity,
and messaging.
While a Web server may not itself support transactions or database connection
pooling, it may employ various strategies for fault tolerance and scalability such as
load balancing, caching, and clustering—features oftentimes erroneously assigned as
features reserved only for application servers.
Eg: Apache HTTP Server, Sun ONE Web Server, iPlanet Web Server
The application server:
As for the application server, according to our definition, an application server
exposes business logic to client applications through various protocols, possibly
including HTTP. While a Web server mainly deals with sending HTML for display in a
Web browser, an application server provides access to business logic for use by client
application programs. The application program can use this logic just as it would call
a method on an object (or a function in the procedural world).
Such application server clients can include GUIs (graphical user interface) running on
a PC, a Web server, or even other application servers. The information traveling back
and forth between an application server and its client is not restricted to simple
display markup. Instead, the information is program logic. Since the logic takes the
form of data and method calls and not static HTML, the client can employ the
exposed business logic however it wants.
In most cases, the server exposes this business logic through a component API, such
as the EJB (Enterprise JavaBean) component model found on J2EE (Java 2 Platform,
Enterprise Edition) application servers. Moreover, the application server manages its
own resources. Such gate-keeping duties include security, transaction processing,
resource pooling, and messaging.
Like a Web server, an application server may also employ various scalability and
fault-tolerance techniques.
Difference between AppServer and a Web server :
(1) Webserver serves pages for viewing in web browser, application server provides
exposes businness logic for client applications through various protocols

8. (2) Webserver exclusively handles http requests.application server serves bussiness
logic to application programs through any number of protocols.
(3) Webserver delegation model is fairly simple,when the request comes into the
webserver,it simply passes the request to the program best able to handle it(Server
side program). It may not support transactions and database connection pooling.
(4) Application server is more capable of dynamic behaviour than webserver. We can
also configure application server to work as a webserver.Simply applic! ation server
is a superset of webserver.
modules are packaged as EAR, JAR and WAR based on
In J2EE application
their functionality .These files are simply zipped files using java jar tool. These
files are created for different purposes.
.jar files:
JAR files (Java ARchive) allows aggregating many files into one, it is usually used to
hold Java classes in a library. i.e. Math.jar These files are with the .jar extension.
The .jar files contain the libraries, resources and accessories files like property files.
.war files:
WAR files (Web Application aRchive) stores XML, java classes, and JavaServer pages
for Web Application purposes. These files are with the .war extension. The war file
contains the web application that can be deployed on the any servlet/jsp container.
The .war file contains jsp, html, javascript and other files for necessary for the
development of web applications.
.ear files:
EAR files (Enterprise ARchive) combines JAR and WAR files to make a combined
archive for Enterprise Applications. The .ear file contains the EJB modules of the
applications

9. 1. Roles & Responsibilities
2. Explain your work in your previous environment (Your script)
3. What is wsadmin / jacl scripting
WSADMIN is a scripting interface (or command-line interface) into
WebSphere Application Server that permits the automation of many different tasks
that we can do using a (web interface) or graphical user admin console.
JACL scripting is the scripting language that is supported by the
WebSphere Application Server to administer or write any custom-based task.
What are the different wsadmin objects.
AdminConfig
AdminControl
AdminApp
AdminTask
Help
How do you invoke wsadmin command
Go to the appropriate <profile_home> and type wsdmin.
How do you execute a jacl script
>wsadmin -f myScript.jacl
What did you use wsadmin / jacl scripting for.
4. Explain
Session affinity:
Most servers use the term "Session Affinity" to indicate that within a
cluster of servers, requests from the same client always get routed back to the same
server. (or) In a clustered environment, any HTTP requests associated with an HTTP
session must be routed to the same Web application in the same JVM.
Session Persistance:
You use session persistence to permanently store data from an HTTP
session object to enable failover and load balancing across a cluster of WebSphere
Applicaiton Servers.
Sessiontracking:
Session tracking enables you to track a user's progress over multiple
servlets or HTML pages, which, by nature, are stateless.
How do you set session time out :

10. You can specify an interval of time after which HTTP sessions expire.
click Servers > Application servers > server_name > Web container
settings > Session management > Session Timeout
What are the different levels at which session timeout can be set
application level, web module level, server level
5. How do you upgrade WAS
GUI Upgrade
Silent Upgrade
Logs files and their paths for both
6. Back Ups
How do you take back ups in WAS
backupConfig.sh [filename] -nostop
What is the out put file
WebSphereConfig_yyyy-mm-dd.zip
How do you restore back ups
restoreConfig.sh <filename.zip> -nostop
What is the Backup policy in your previous company
Incremental Backups every week.
7. Explain profiles and what is the equivalent command in WAS 5.x
In WAS 5.x ----> wsInstance.sh -name instanceName -path
instanceLoacation -host hostName -create | delete
8. What are the different kinds of sync operations
1. Automatic synchronization.
2. Manual synchronization.
3. Startup synchronization.
How do you disable auto sync
System Administration > nodeagent > file synchronization service >
Uncheck automatic synchronization.
What is the default interval for auto sync
60 seconds.
9. What are the different UserRoles in WAS
1. Monitor 2. Operator 3. Configurator 4. Administrator

11. 10. Explain JNDI in WAS
Each application server hosts a name service that provides a Java
Naming and Directory Interface (JNDI) name space. The service is used to register
resources hosted by the application server. The JNDI implementation in WebSphere
Application Server is built on top of a Common Object Request Broker Architecture
(CORBA) naming service (CosNaming).
JNDI provides the client-side access to naming and presents the
programming model that application developers use. CosNaming provides the server-
side implementation and is where the name space is actually stored. JNDI essentially
provides a client-side wrapper of the name space stored in CosNaming and interacts
with the CosNaming server on behalf of the client.
Simple
Simple name
The simple name binding is guaranteed to succeed if lookup is within
the same server or when connected directly to the name space of the server
containing the target of the lookup. It can be used in a servlet or EJB, if it is certain
that the object is located on the same application server. Here is an example of a
simple name:
ejb/webbank/Account
Corba
Corbaname
The corbaname binding is always guaranteed to work. However, it
requires that you know the correct path to the object at deployment time. Here is an
example of a corbaname:
corbaname::myhost1:9812/NameServiceServerRoot#ejb/webbank/Account
Complex names
Compound name/remote/complex
Applications that do not run in the same server cannot use simple
name lookup because the simple name is not local to the application. Instead, an
application of this type must look the object up directly from the name server. Each
application server contains a name server. System artifacts such as EJB homes are
bound relative to the server root context in that name server. The fully qualified
(compound name) JNDI name is always guaranteed to work.
Here is an example of a compound name:
cell/nodes/node1/servers/server1/ejb/webbank/Account
When do you use dumpNameSpace.sh
Run the dumpNameSpace command against any bootstrap port to
get a listing of the names bound with that provider URL.

12. 11. Explain JDBC Connection Pooling
Each JDBC data source has a pool of JDBC connections that are
created when the data source is deployed or at server startup. Applications use a
connection from the pool then return it when finished using the connection.
Connection pooling enhances performance by eliminating the costly task of creating
database connections for the application.
Each data source that you configure contains a pool of database
connections that are created when the data source instance is created-when it is
deployed or targeted, or at server startup.
Connection Timeout
This value indicates the number of seconds a request for a connection
waits when there are no connections available in the free pool and no new
connections can be created.
Max Connections
Specifies the maximum number of physical connections that you can create in
this pool.
Min Connections
Specifies the minimum number of physical connections that you can create in
this pool.
Reap Time
Specifies the interval in seconds between runs of pool maintenance thread.
Unused Timeout
Specifies the interval in seconds after which an idle or unused connection is
discarded.
Aged Timeout
Specifies the interval in seconds before a physical connection is discarded.
Which one should be the highest and which one should be the lowest in
the reap/unused/aged timeouts.
Aged timeout should be the highest and Reap timeout should be
lowest.
Purge Policy
Specifies how to purge connections when a stale connections or fatal
connection error is detected.
What are stale connection exceptions
When an application receives a stale connection exception on a
database operation, it indicates that the connection currently held is no longer valid.
(or)
Whenever a troubled connection is encountered, a
staleConnectionException is raised. (A troubled connection is an inconsitent
connection object in a connection pool)
12. Explain the Deployment steps of a J2EE application to WAS

13. 13. How would you go about when a new application comes into ur
environment (resources, settings, heaps etc)
14. What is rollover update
It is used to rollover the updates to all the cluster members in a
cluster whenever any changes are made to even one of the cluster member.
15. What is ripple start
RippleStart combines stopping and starting operations. It first stops
and then restarts each member of the cluster.
16. Explain 2 Troubleshooting scenarios
17. How would you set up introscope profiles/probes
Wily's Introscope is an enterprise application performance monitoring
tool. It provides an overview of application and server health and statistics.
18. VerboseGC
VerboseGC is the logging mechanism implemented by the JVM
to diagnose memory/storage problems. Here Garbage collection identifies and frees
previously allocated storage that is no longer in use. An understanding of the way
that the Garbage Collector works will help you to diagnose problems.
Verbose logging is intended as the first tool to be used when
attempting to diagnose garbage collector problems; more detailed analysis can be
performed by invoking one or more (trace garbage collector) traces.
How do set it up
In Admin Console goto Servers > Application Servers > Java
and Process Management > Process Definition > Java Virtual Machine > Check
Verbose Garbage Colletion option.
What files have verbosegc information
That particular server's (<profile_home>/logs/servername/)
native_stderr.log
What tool did you use to analyse verbosegc logs
GCAnalyzer
19. What is process definition.
A process definition specifies the run-time characteristics of an
application server process. A process definition can include characteristics such as
JVM settings, standard in, error and output paths, and the user ID and password
under which a server runs.

14. What is the effect of changing max heap and min heap size of a jvm
Max Heap Size: When you have established the maximum
heap size that you need, you might want to set the minimum heap size to the same
value; Using the same values is not usually a good idea, because it delays the start
of garbage collection until the heap is full. The first time that the Garbage Collector
runs, therefore, becomes a very expensive operation. Also, the heap is more likely to
be fragmented and require a heap compaction. Again this is a very expensive
operation.
Min Heap Size: The recommendation is to start your
application with the minimum heap size that it needs. When it starts up, the
Garbage Collector will run often and, because the heap is small, it runs efficiently.
Whats the max heap allowed by AIX
Minimum heap size allowed
AIX: 4 MB
LINUX: 4 MB
WINDOWS: 4 MB
Maximum heap size allowed
AIX: Half the available memory with a minimum of 16 MB and a maximum of
512 MB
LINUX: Half the available memory with a minimum of 16 MB and a
maximum of 512 MB
WINDOWS: Half the real (physical or RAM) memory with a minimum of 16 MB
and a maximum of 2 GB
What are the effects of large initial heap/max heap
The time between garbage collections will increase, but the garbage
collection will take longer, which indirectly effects the turn-around-time of the
applicaiton performance.
(or)
Because it delays the start of garbage collection until the heap
is full. The first time that the Garbage Collector runs, therefore, becomes a very
expensive operation. Also, the heap is more likely to be fragmented and require a
heap compaction. Again this is a very expensive operation.
20. Heap Dumps/ Core dumps
What is a heap dump
Heapdump is a JVM facility that generates a dump of all live
objects that are on the Java heap at a certain point in time; that is, those that are
used by the Java application. When the java heap is exhausted
the JVM will generate a heap dump by default.
By default, you get heapdumps only on OutOfMemoryErrors. You do
not get heapdumps in crashes or through a signal to the JVM.
It shows the objects that are using large amounts of memory on the

15. Java heap, and what is preventing them from being collected by the Garbage
Collector.
What is a core dump/thread dump
Java thread dumps provide detailed information about all active
Java threads. It is useful in several situations, most notably for hung servers.
How to generate Heap dump both WAS 5/6
By default, you get heapdumps only on OutOfMemoryErrors. You do
not get heapdumps in crashes or through a signal to the JVM. In order to manually
generate a heapdump, you must first enable signal-based heapdumps by setting the
IBM_HEAPDUMP=TRUE and IBM_NOSIGHANDLER=TRUE environmental variables
and through wsadmin follow the below process:
>set myheap_dm [$AdminControl queryNames type=JVM,process=server1,*]
>$AdminControl invoke $myheap_dm generateHeapDump
How to generate core dump/thread dump both WAS 5/6
Through wsadmin
>set mythread_dm [$AdminControl completeObjectName
type=JVM,process=server1,*]
>$AdminControl invoke $mythread_dm dumpThreads
Whats the difference between kill -3 command executed on WAS5 JVMs
and WAS 6 JVMS
kill -3 command generate core dumps.
What tools did you use to analyse core dump/thread dump
IBM ThreadAnalyzer
What tools did you use to analyse heap dumps
IBM HeapAnalyzer
In what scenarios is a core dump/thread dump useful
It is useful in several situations, most notably for hung servers or hung
thread situations or thread deadlock situations.
In what scenarios is a heap dump useful
It is useful in situations, most notable for memory leak
problems or memory allocation problems for exaple OutOfMemoryExceptions.
What are the respective extensions (jdk 1.3 and 1.4)
jdk 1.4 heap dump format generates a .phd format
21. How do you make a jvm run as a service in windows and why.
WASService.exe. The reason we can utilize this service on
Windows platform is because the Windows OS automatically starts this service
whenever the system is up and we can flexibily start and stop the server from
windows services.

16. 22. What is activity log and how do you view it.
These are IBM Service logs which are in binary format, which logs
activity of various WebSphere Application Server components. Log Analyzer is used
to view the activity.log files.
23. How do you set up traces.
In Admin console Troublshooting > logs and trace > servername >
choose Diagnostic trace
24. What is a PMR and explain how you worked with IBM on a PMR
PMR: Problem Management Record ---- PMR is created wehn a customer
submits a request to fix a software problem via ESR. A PMR number is assigned to
track the request. You can attach files to your PMR to provide the IBM engineer more
information to better assist you.
ESR: Electronic Service Request --------
25. What all parameters did you tune in WAS (other than JDBC connection
pool and heap sizes)
We can tune some of these other aspects such as
1. Application server (parameter : )
2. JVM tunings (parameter : )
3. Applications (parameter : )
4. Database (parameter : )
5. JMS (parameter : )
6. Security
7. Hardware capacity and settings (parameter : )
8. Operating System (parameter : )
9. Web Servers (parameter : )
26. What other connection pools do you know in WAS other than JDBC
connection pool
J2C connection pool
MQ connection pool
Thread pool
27. How do you enable global security in WAS
1. Configure User registries (it can be custom, LDAP, or local
OS)
2. Configure Authentication mechanisms (LTPA)
3. Configure Authorization (if there is any)
and then check Enable global security.
How do u configure an LDAP
1. In the Deployment Manager Admin Console, select Security -> Global

17. Security > User Registries -> LDAP.
2. Provide the details for the fields in the Configuration panel as listed below:
Serverid, Serverpassword, Type, Host, Port, Base DN, Bind DN,
Bind password (please get this info from LDAP admin)
3. Click Apply
4. Save the configuration for WebSphere.
5. We need to define the configuration for Global Security in the
Administrative Console. Navigate to Security -> Global Security.
6. "Check" 'Enable global security' option
7. "Uncheck" 'Enforce Java 2 Security' option
8. From the Active User Registry drop-down list select LDAP as the active
user registry.
9. Click Apply; this will validate the settings.
10. Save the configuration for WebSphere, and then restart the server.
How do u configure LTPA
Global Security > Authentication mechanism > LTPA > provide the password
and Apply
How do u configure SSO
Global Security > Authentication mechanism > LTPA > SSO > check
'Enabled' option
What is the limitation of SSO
It is applicable only to a single domain. It cannot span multiple
domains. Example: mail.google.com (every resource under google.com can be
accessed) but outside of that domain SSO cannot be applied.
How do you make SSO work across multiple cells
The LTPA token keys must be exported to the target cell and the LTPA
token key from the target cell must be imported into the current cell.
Does WAS support multiple LDAPs?
Yes, from 6.0 version onwards
28. What is SSL
Secure Socket Layer is the technology to establish secure
communication along with data integrity and encryption over the network or between
the nodes (machines)
29. Did you ever work with certificates
Yes,
30. What is the utility that comes with WAS / IHS to manage certificates
ikeyman.sh
31. What is the defualt key store location for WAS

18. <profile_home>/etc
32. How do you change the port number for admin console
Logging into the admin console
http://<hostname>:<admin_port>/admin
ex: http://localhost:9060/admin
Without logging into the admin console
C:WebSphereprofilesdmgrconfigcellsdmgr_cellnodesdmgr_nodeserviceindex.
xml (dmgr starts but cannot open the admin console because the port hasn't been
changed in virtual host xml file)
C:WebSphereprofilesdmgrconfigcellsdmgr_cellvirtualhosts.xml
33. How do you disable security for Deployment manager without logging
into the console
security.xml , enable=false
34. If you have to change the ports of a jvm manually without logging into
the admin console which file would you edit.
serverindex.xml
35. Explain virtual hosts concept
A virtual host is a configuration that enable a single host machine to
resemble multiple host machine.
What are the two virtual hosts that come with WAS installation
admin_host, default_host
36. What is the plugin configuration file and where is it located
The plug-in configuration file (plugin-cfg.xml) contains routing information for
all applications mapped from the web server to the application server.
How do u regenerate the plugin config file
The GenPluginCfg command is used to regenerate the plug-in
configuration file. Depending on the operating platform, the command is:
Linux and Unix: GenPluginCfg.sh
Windows: GenPluginCfg.bat
When do u regenerate the plugin config file
The plug-in configuration file needs to be regenerated and propagated
to the Web servers when there are changes to your WebSphere configuration that
affect how requests are routed from the Web server to the application server.
These changes include:
_ Installing an application

19. _ Creating or changing a virtual host
_ Creating a new server
_ Modifying HTTP transport settings (i.e HTTP ports)
_ Creating or altering a cluster
When do you manually edit the plugin config file
When enabling SSL (specifying the key file name), LoadBalanceWeight,
and minimum number of connections.
What is the information in a plugin config file
Plugin config file contains routing information along with information
on virtual hosts , clusters (cluster members), and URIs.
When the request comes to a webserver how does the webserver know
the JVM that is capable of handling that request.
The webserver first takes the request and if it can't serve, it
forwards the request to the plugin config file . The plugin config file routes the
request to the appropriate application server (or cluster member or jvm)
according to the mapping information it has.
What is the refresh interval of plugin.
60 seconds
If a change is made to the plugin config should the webserver be
restarted?
Not Required because the plugin's automatic refresh interval is 60
seconds.
37. What webserver did you work on
I have on on IBM HTTP and Apache web servers.
What is the configuration file for IHS
httpd.conf
If changes are made to the config file should the webserver be restarted
Yes. The webserver must to restarted so the changes made to the config
file become effective.
What changes are made to this config file (automatically) during plugin
installation on the webserver
The plugin's binary module file (.dll) path and the plugin's
configuration file (plugin-cfg.xml) path will be copied to the httpd.conf file
automatically.
38. What is collector tool
The collector tool gathers information about your WebSphere Application

20. Server installation and packages it in a Java archive (JAR) file that you can send to
IBM Customer Support to assist in determining and analyzing your problem.
Information in the JAR file includes logs, property files, configuration files, operating
system and Java data, and the presence and level of each software prerequisite.
Collector tool can be run by only root or administrator.
Syntax
It must be invoked from a temporary work directory >
C:IBMWebSphereAppServerbincollector.sh | bat
Use
It can be used to send it to the IBM Customer Support to assist in
determining and analyzing your problem.
Output file
The output will a .jar file. For example: node31-dmgr_cell-dmgr_node-
dmgr-WASenv.jar
39. When on a system there is an existing installation of websphere
federated to the DM. You make one more installation and federate this to
another/same DM.
Will it work??
We can federate it to the same DM. This works.
If it doesnt, how will you make it work
40. What is the difference between horizontal/vertical clustering.
Clustering is a mechanism which provides workload management (WLM) and
failover for applications that reside on the application server cluster.
Horizontal clustering: For high availability and horizontal scalability.
Vertical clustering: For high availability and vertical scalability.
Disadvantage: Single point of failure.
When would you use them
For workload management (WLM) and failover requirements.
41. When an application is deployed, where can the application binaries be
found
In the Applications folder when the application is deployed. Ex:
C:IBMWebSphereprofilesdmgrconfigcellsdmgr_cellapplications
42. Unix commands
43. How do you create a JDBC resource
To view this administrative console page, click Resources >JDBC Providers
> New.

21. Step 1: Select the database type. Choose a supported database type.
Step 2: Select the JDBC provider type. Choose a supported JDBC Provider
type.
Step 3: Select the implementation type. Choose a supported implementation
type.
Step 4: Apply
Step5: Now create the required Data Sources
To view this administrative console page, click Resources > JDBC
Providers > JDBC_provider > Data sources > New
44. What is the difference between webserver handling in WAS 5 and 6
45. New features in WAS 6
46. What is the pre requisite for syncnode command
The nodeagent on the node must be in a stopped state when this
command is executed.
47. What are the logs in IHS
access.log, error.log
48. How do you change the log format in IHS
In httpd.conf file change the following line to your required parameters
----- LogFormat"%t %h %u %m"
49. What are the configuration files in IPlanet web server
magnus.conf, obj.conf
50. What is TAI, and how do you enable it.
TAI = Trust Association Interceptor. Trust association is used to connect
reversed proxy servers to WebSphere Application Server.
(or)
Trust association enables the integration of IBM WebSphere Application
Server security and third-party security servers.
Global Security > LTPA > TrustAssociation > Check Enable trust association
and Apply
1) What is the recommended free disk space in /tmp to install WAS.
1 GB
2) What is the default installation location of WAS in Linux.
Opt/IBM/WebSphere/AppServer

22. 3) What is the default installation location of WAS in Sun Solaris.
Opt/IBM/WebSphere/AppServer
4) What is the default installation location of WAS in AIX
Usr/IBM/WebSphere/AppServer
5) List any 10 parameters in response file
-W silentInstallLicenseAcceptance.value="true"
-P wasProductBean.installLocation="C:IBMWebSphereAppServer"
-OPT disableOSPrereqChecking="true"
-OPT installType="installNew"
-OPT createProfile="true"
-OPT profileType="deploymentManager"
-OPT PROF_enableAdminSecurity="true"
-W nodehostandcellnamepanelInstallWizardBean.nodeName="krishna_node"
-W nodehostandcellnamepanelInstallWizardBean.hostName="localhost"
-W winservicepanelInstallWizardBean.winServiceQuery="true"
-W winservicepanelInstallWizardBean.accountType="localsystem"
-W winservicepanelInstallWizardBean.startupType="manual"
6) Write the complete command to execute a response file.
<was-setup>./install –options “<absolute path of response file>” – silent
7) Which registry file will get updated after installation of WAS.
vpd.properties
8) What is the use of SOAP Connector port and what is the default soap port number
for DMGR profile.
Client Applications like wsadmin uses Simple Object Access Protocol and
that is listening to the port 8879. If we want federate a profile by using
SOAP protocol and SOAP connector port number, we can federate a profile.
9) What is the default Http transport port number for Application Server profile and
what is the use.
9080, (if ssl was enabled 9443) If we want to invoke applications running
on AppServer we are using HTTP transport port
10) What is the default Bootstrap port number in App.Serv profile and what is the
use.
2809. To access the EJB’s, JNDI use bootstrap port to obtain initial context
root.
11) Installation was successful and when I am trying to start server it is giving
“Invocation Target Exception” why you will get this issue and how you are trouble
shooting this issue.
May be the problem with hostnames, hostnames are mismatched. Add the
host name in etc/hosts file which you had given at the time of installation.

23. 12) What are different profile templates in WAS 6.0?
Dmgr, default and managed
13) Write the complete command to create an App.Serv profile through command
line.
C:IBMWebSphereAppServerbin>wasprofile.bat -create -profileName
AppSrv04 -profilePath "C:IBMWebSphereAppServerprofilesAppSrv04"
-template Path "C:IBMWebSphereAppServerprofileTemplatesdefault"
-nodeName app_node04 -cellName cell04 -hostName krishamurthy
14) Write a complete command to delete a profile.
C:IBMWebSphereAppServerprofilesAppSrv01bin>wasprofile.bat
-delete -profileName AppSrv01
15) If you get a problem before creating a log’s directory at the time of installation,
at that time where you can check the status of installation
tmp/log.txt
16) What is the difference between managed node and unmanaged node
Manged Node contains node agent, we can administer federated profiles
servers and applications from dmgr admin console. For unmanaged the will
be no nodeagent.
17) What is the impact for the federated profile servers, if DMGR is down.
No impact on servers and applications
18) In which xml file, we can change the port numbers.
Serverindex.xml
19) What is a server.
Server provides a runtime environment for your web app’s Or Enterprise
applications.
Server receives user request, process that request and execute that request
and response will be generated to the end users.
20) If we stop the nodeagent, what will be the impact for end users.
There is no impact for end users
21) How to take backup with out stopping servers.
./backupConfig.sh –nostop
22) What are the different user registries under global security in 6.0 and 6.1.
Local OS, Custom, LDAP. Federated repository was added in 6.1
23) What is the necessity of global security?
To provide security for the admin console.

24. 24) What is the port number for LDAP server with SSL and without SSL?
389 and 636
25) How to disable Global Security
./wsadmin.sh -conntype NONE
Securityoff exit
26) How to know how many profiles are available.
/AppServer/bin>./wasprofile.sh –listProfiles
27) What are the advantages and disadvantages of Local OS,Custom and LDAP user
registries?
Global Security: In 6.0 we have 3 ways to provide security for admin
console.
1) Local os user registry.
2) Custom user registry.
3) LDAP (Light Weight Directory Access Protocol) user registry.
a) Custom user registry: Here we have to create two files named:
Users. Registry
Groups. Registry
We can create this file any where but we have to configure this absolute path to the
application servers.
b) LDAP: It is a mechanism & not a server. Here we are integrating seperate
directory servers.
if SSL is enabled the port number is 636, if it is not enabled 389.
-> In local os user registry we have to create user accounts and that user
accounts have to configure to websphere application servers.
where as in the custom user registry specifying user names and passwords in
a normal file and we are specifying the absolute path of that file into the websphere
application server. whenever we are going for LDAP user registry we have to specify
user id & password & type of directory server, port number (default is 389), if SSL is
enabled we have to specify port number as 636 and we have to specify Base
distinguished name which indicates authentication for users and we have to specify
Bind distinguished name and Bind password which specify authorization for user and
we have to select "Advanced Light Weight Directory Access Protocol user registry
settings" there we have to specify user filter classes and group filter classes
(automatically it will be there) and finally we have to restart the server.
28)What is the full form of JDBC.
JDBC (java Database Connectivity) is an API (Applicationprogram Interfaces), that is
useful to write a java program to connect any database, and retrieve the data form
the database and utilize the data in the java program.
Making a connection to a database
Creating SQL or MySQL statements
Executing that SQL or MySQL queries in the database
Viewing & Modifying the resulting records

25. We have 2 types of JDBC drivers in was. Those are Type2(Thick) and
Type4(Thin/Native Protocol) jdbc drivers.Type2 JDBC drivers require the database
client software on the client node to connect to the database server.Type4 JDBC
drivers connect directly to the database server.
29) What is the full form of JAR and what a jar file contains?
An EJB module which contains enterprise java beans class files and EJB
deployment descriptors are packed as JAR files with .jar extension.
30)Write the name of the jar file necessary to configure Oracle 9i & Oracle 10g
Database.
In oracle 10g & 9i We have only one jar file i.e OJDBC14.JAR (for log) & Class12.jar
(for 9i) and In DB2 we have 3 or more jar files. i.e
DB2JCC.JAR,DB2JCC_LICENSE_C4.JAR, DB2JCC_LICENCE_CIS42.JAR.
-> The .jar file is nothing but a collection of .class files. It is necessary to
communicate with the database. So we should configure this jar files with database.
31) What is a connection pool?
Connection pooling is a place where a set of connections are kept and are used by
the different programmers with out creating connections to the database(it means
there is a ready made connection available for the programmers where he can use).
After using the connection he can send back that connection to the connection pool.
Number of connections in connection pool may vary.
32) What is meant by Federation
33) What are the different types of console roles available and explain about each
role?
34) what is your goal and role in was?
Goal -
a. Goal is to provide infrastructure for the demands
b. goal is to provide stable environment
c. goal is to provide high availability
d. goal is to provide scalability
e. goal is to provide 0 downtime
Role-
a. involve in infrastructure architecting a.k.a design
b. involve in implementing architectures
c. involve in solving infrastructure issues
d. involve in solving application environment issues
e. involve in solving issues which become hurdles in providing high availability
f. involve in solving issues which become hurdles in scaling
35) what is incident management?
Incident = Issue. Hurdle. Risk. Downtime. Security Breach.
Incident Management = Risk Plan. Potential incidents management.
36) Do you know how to configure ticketing tool with WAS?

26. This is a meaningless question. You need more information to address this question.
Ticketing System - is it part of IBM? Does it fall in Web Sphere Umbrella? Is it an
application running on WAS? Is it a Web based app? or Java Client?
Unless you know these, it’s a blind question.
37) when you configure LDAP with application server, if the users are unable to
connect to WAS. How do you trouble shoot this scenario?
You don’t trouble shoot, you *troubleshoot*
The issue is - U have LDAP, running on Server x. Server y, WAS bind to server x.
if a problem occurs, u need to dig like this -
A) Ldap up or not
B) If yes, can server y reach server x [simple ping or telnet on ldap port]
C) If yes - Ur infrastructure is clear
D) Any firewall between server y and server x. talk to firewall team, ask them to
enable trace between server y and x. any droppage of packets?
E. if everything is clean, talk to ldap admin, enable trace on that specific group who
are getting auth errors.
F) Look into systemout.log, find out what exactly the error message you get.
G) U have to login to admin console and verify the authentication. u can *test* ldap
auth from console. Feb 7 (2 days ago) Raju
38) What is the difference between Signed Certificate and Self-signed certificate?
Which one you prefer?
http://webdesign.about.com/od/ssl/a/signed_v_selfsi.htm
39) In Windows 2003 box, an application server process is not responding. How do
you trouble shoot this issue. Even when you are unable to kill the process.
*trouble shoot* - On any server, app server freeze - may because of resource
crunch, or process failing to release a resource, jvm could not complete a specific
thread, blablabla.
a. do u have enuf rights to kill the process?
b. check the processor utilization thru task manager
c. kill -3, if not responding, try again, again and again
d. verfiy the disk space.
e. verify error log and out log.
Blabla
40) how many types of scripting you have done or you know?
such questions cannot be asked in a forum, or its difficult to answer. if i were you, i
wud say, perl scripting, php, python, jython, tcl, jacl, ant, shell, blabla. Feb 7 (2
days ago)
41) when you are on call support when you got a severity 1 ticket, how do you take
action. Explain in detail.
Open the ticket, read the message what the problem is about.
login to targeted server(s), check logs, depending on error, propagate first hand info
to stakeholders. sit on the issue, fix it, close it.

27. 42) What is a fix pack, refresh pack and when you will go for fix pack installation and
when you will go for refresh pack installation?
fix pack fixes certain issues.
refresh pack is a mile stone for a release.
a refresh pack takes you to a release, say
6.0.0.1 is a release. if you apply rp2, it becomes a release 6.0.2. if you apply fp35, it
becomes 6.0.2.35, which is not a release. Feb 7 (2 days ago) Raju
43) when you find in a particular server 'cpu starvation' error message what you will
do?
whenever there is not enough physical memory available to allow the high
availability manager threads to have consistent runtimes. When the CPU is spending
the majority of its time trying to load swapped-out processes while processing
incoming work, thread starvation might occur.
Goto InfoCenter, search for starvation.
To achieve good performance and avoid receiving these error messages, it is
recommended that you allocate at least 512 MB of RAM for each Java process
running on a single machine.
High CPU usage in a large cell configuration when security is enabled
With certain configurations and states, the amount of time spent in discovery
becomes substantial.
If a large the number of processes are defined within a core group, a proportionally
large number of connections must be established to support these processes.
If a large number of inactive processes are defined within a core group, a
proportionally large number of connections are attempted during each discovery
interval.
If global security is enabled, the DCS connections are secured, and the impact of
opening a connection greatly increases .
To decrease the CPU time spent in discovery:
In the administrative console, click Servers > Core groups > Core groups settings ,
and then select the -> DefaultCoreGroup.
Under Additional Properties, click Custom properties > New.
Enter IBM_CS_UNICAST_DISCOVERY_INTERVAL_SECS in the Name field and 120 in
the Value field.
Click OK.
Then click New again and enter IBM_CS_SS_SECURE_TOKEN in the Name field
andfalse in the Value field.
Click OK and then Save to apply these changes to the master configuration.
Restart the server for these changes to take effect.
Transient high availability heartbeat failures und
11.If we said to analyze thread dumps can you do?
Ya!! Why not
44) How comfortable with scripting?

28. 100% pakka comfortable
45) Did you worked with JACL or Jython scripts?
I prefer one scripting style. Why wud I use two scripting styles? At a given point of
time, scripting interface accepts only one language.
46) When you found hung thread error messages what you will do? Will you kill the
process. If yes, in which case you have to kill the process?
Lucky you and lucky me, we have IBM's InfoCenter. Is it not easy to perform a
simple search on InfoCenter like this *hung thread*?
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?
topic=/com.ibm.websphere.nd.multiplatform.doc/info/ae/ae/ttrb_confighangdet.html
Configuring the hang detection policy
The hang detection option for WebSphere Application Server is turned on by default.
You can configure a hang detection policy to accommodate your applications and
environment so that potential hangs can be reported, providing earlier detection of
failing servers. When a hung thread is detected, WebSphere Application Server
notifies you so that you can troubleshoot the problem.
Add the following properties:
Name: com.ibm.websphere.threadmonitor.interval
Value: The frequency (in seconds)
Default: 180 seconds (three minutes).
Name: com.ibm.websphere.threadmonitor.threshold
Value: The length of time (in seconds).
Default: The default value is 600 seconds (ten minutes).
Name: com.ibm.websphere.threadmonitor.false.alarm.threshold
Value: The number of times (T) that false alarms can occur before automatically
increasing the threshold. Feb 7 (2 days ago) Raju
47) Explain about your enivronment, servers, webservers, etc.,
Think about ur company and thier business. Cook a story. Serve it on the table with
some masala, salt and pepper.
48) What is a document server and what is the use of it.
this is the funniest question one can ask.
what is a document server? in general a document server is a repository of
documents in an enterprise.
what is the use of it? its the central repository and depending access polices agency
wide authorized and authenticated *users* can access documents.
ex.,
u have prepared a document on ur environment. u need a place to put that
document so that ur team can access it, ur manager can access it. above that,
another team who wants to read that document can access that, above that, some
infrastructure team can access it, above that datacom people can access it and so
on.
what is the best place to put it?
on ur desk top? or attach to mail? or dump it in a shared location.

29. if its a shared location, what that could be? will you dump it in a zunkyard shared
location or in a proper shared location? first | < previous | next > | last
report spam reply
49) TYPES OF SEVERIATIES?
Severities will be of different types like Severity 1, 2, 3, 4, 5.
Depending upon the type of issue it will be classified.
50) WHAT TYPE OF ISSUE'S CONTAIN SEVERIATY1 TICKET'S?
Severity 1 tickets are the most rare tickets which will get and
which we have to get in our administration.
If our process is not running smooth, that means your application not responding,
application server is not responding or entire environment falls then we will get
severity 1 ticket.
51.WHAT IS THE DIFF B/W COREDUMP & THREAD DUMP?
there is not much difference between these two.
In thread dump we can find, what are the active threads that are there at that
particular time. Where as core dump contains information about dead locks,
hang threads also
52.WHEN THE SERVER HUNG HOW WILL IDENTIFY IN SYSOUT.LOG?
Its very simple in systemout.log we will find a particular thread is hung from this
many milli seconds will be found. The thread name will be WSVR****
53. HOW TO TAKE BACKUP THE APPLICATION?
Taking backup of the application can be done by using export option
in the admin console or directly from the directory location.
54. WHAT'S THE RELATION B/W WIILY INTROSCOPE & WAS(LIKE
AGENT/AGENTLESS)?
Wily introscope is a third party tool which is used to monitor the server
environments,
not only WAS anything.
55) Difference between Websphere 5.1, 6.1 and 7.0
Profiles
WebSphere 5.1:No Concepts of profile ,there are 4 types of Installation
-Express,Base ,Network Deployment and Enterprise.
Websphere 6.1:Cell Profile,Deployment Manager profile,Application Server
profile,Custom Profile
Websphere 7.0 Cell(DeploymentManager and managed
node),Management,Application Server,Custom profile,Secure Proxy.
Note:Under Management there are three types of profiles available :Administrative
agent
Deployment Manager

30. Job Manager
Note:The Main use of Job Manager is to queue jobs to application server in a flexible
management environment
Managing Profiles
WebSphere 5.1 :Websphere multiple installation instance can be created using
wsinstance script
WebSphere 6.1:There are two ways of managing a profile
1.Profile Management Tool(GUI)
2.Manage profiles(Command interface for managing profiles )
WebSphere 7.0: same as 6.1
Security Roles
WAS 5.1:Administrator,operator,configurator
WAS 6.1:Administrator,operator,configurator,Deployer,Admin Security Manager,ISC
Admin
WAS 7.0:Administrator,operator,configurator,Deployer,Admin Security Manager,ISC
Admin,Auditor
WebServers supported
WAS 5.1:Apache HttpServer,Domino Server,IHS,Microsoft IIS,Sun Java System Web
Server,HTTP Server for iseries
WAS 6.1:Apache HttpServer,Domino Server,IHS,Microsoft IIS,Sun Java System Web
Server
WAS 7.0:HTTPServer for Z/Os and all web servers supported in 6.1
User Registries/Repositries
WAS 5.1:Local Operating System,Standalone LDAP registry,Standalone Custom
registry
WAS 6.1:Federated repositories,Local Operating System,Standalone LDAP
registry,Standalone Custom registry or file based registry
WAS 7.0:Same as 6.1
lOGGING AND TRACING
WAS 5.1Diagnostic trace
JVM logs
Process logs
IBM Service logs
WAS 6.1
Apart from the logs available in 5.1 there is a Change log detail levels which will
enable the Message level and trace level of the JVM
WAS 7.0Same as V 6.1
Managing WebServers

31. WAS 5.1:Web Servers cannot be managed through Websphere Admin Console
WAS 6.1:WebServers can be Administered using the Websphere Admin Console
(Stopping, Starting, Generation and propagation of Plug-in can be done). Web
Servers can be created in Managed node or in Unmanaged node
WAS 7.0 same AS V 6.1
JMS
WAS 5.1:JMS Fail Over Support and scalability is not available
WAS 6.1:JMS Fail over support and scalability is available.SIB(Service Integration
Bus Concept is being introduced)
WAS 7.0:Same as V 6.1
Monitoring
WAS 5.1:N/A
WAS 6.1:TPF(Tivoli Performance Viewer) is embedded in the Websphere Admin
Console for monitoring WebSphere Objects
WAS 7.0same as V 6.1
Intelligent Run Time provisioning
WAS 5.1N/A
WAS 6.1N/A
WAS 7.0Intelligent run time provisioning is a new concept introduced in V7.0 At run
time the server uses the activation plan to start only those components that are
required inside the application server
Components like Web Container , EJB Container , Web Service and SIP Container are
dynamically activated
SIP and Portlet Container
WAS 5.1:N/A
WAS 6.1SIP(Session Initiation Protocol) extends the application server to allow to
run SIP applications written to JSR 116 Specification
The Portlet applications can deployed which is compliant with JSR 168
WAS 7.0same as V 6.1
wsadmin scripts
WAS 5.1:JACL is the scripting language which is used
WAS 6.1:JACL will be deprecated from 6.1 and Jython scripting will be used.
WAS 7.0:Same as V 6.1
Posted by TechnoTips at 4:18 AM 0 comments
Reactions:
Thursday, September 25, 2008
create Heapdump using wsadmin
//Refrence of JVM

32. objectName=AdminControl.queryNames('type=JVM,process=WebSphere_Portal,*')
wsadmin>print objectName
WebSphere:name=JVM,process=WebSphere_Portal,platform=dynamicproxy,node=a
hdp2csmwas78,j2eeType=JVM,J2EEServer=WebSphere_Portal,version=6.0.2.21,typ
e=JVM,mbeanIdentifier=JVM,cell=wpcell
//genrate heapdump
wsadmin>AdminControl.invoke(objectName, "generateHeapDump")
Posted by TechnoTips at 4:24 AM 0 comments
Reactions:
1)What is 5 Tier Architecture?
in J2E we can write 5 tier archi like
1. Client Tier- Browser, Applet, Client Applications
2. Presentation Tier- Servlets, JSP
3. Business Tier- EJB or Some Business Objects
4. Integration Tier- JDBC
5. Backend Tier- Databases, JMS
2)we know that 3 tier have
1.UI(User interface) or (presentation) logic
2.BL (Business)
3.DL (Database)
2)Tell me about the Architecture of Web Application (how it will happen Workload
Management & clustring)
when ther request coming from the browser the webserver will handled that reuest ,
It will handled over to the plug-in, then the plug-in will looks in to the plug-in cfg.xml
file for
the reuested url and It will redirect the request to the avaliability of the servers in
the cluster.
The plug-in mainly perform the work load management.If any server is processing
any request then the plug-in will route the request to the avaliability of the servers
based on their weight and based on the algorithams.
3)what are the main point while installing an IHS?
The main use of installing any external web server is to proces the dynamic content
request
4)what the file path of httpd.conf?
/opt/IBM HTTPSERVER/conf/httpd.conf

33. window
c:programfilesIBM HTTP SERVERconfhttpd.conf
5)What are Java Programming languages?
Servlets,jsp,ENB,Struts,JSF,HIbernate
6)What is Object pool?
How to take back up ? while taking back is it necessary to stop the server?
execute backupConfig.sh command to take the backup ,yes it is required to stop the
servers,
by default when you execute this command it will stop all the servers on the node so
yhe partially
synchronized information will not be saved .
what are the Deployment ways ? steps ?
1.Hot fix
2.wsadmin
3.AdminConsole
4.Using third party tolls like ,Teamsite ,Cruise Control, MKS etc.
1)what is thin driver and thick driver.why it is cal...
thick driver - type 1 and type 2 JDBC drivers are called thick drivers. The reason for
it is - it provides JDBC access via ODBC
drivers. ODBC binary code and in many cases database client code must be loaded
on each client machine that uses such a driver.
and as the program is connected to database by an extra layer in the clint hence
thay are called thick drivers.
Thin drivers: This style of driver converts JDBC calls into the network protocol used
directly by DBMSs allowing a direct call
from the client machine to the DBMS server and providing a practical solution for
intranet access. hence their conenction to DB
is more direct and without any intermediate stage making them thin drivers. type 4
driver.
Basic difference between thin and thick client
Oracle has a thin client driver which mean you can connect to a oracle database
without the Oracle client installed on your machine.
Thick client would need the Oracle Client database drivers etc.. Drivers include JDBC-
ODBC bridge drivers JDBC drivers depending on tns resolution.
Dominic
thin driver is 4 type driver in java which r provide the connectivity between
oracle and java.the main advantage is this driver is we connect the databse to java
without create DSN.and it provide the all the host computer connectivity in the
network.so its r most important driver which we use in the java.
2)What is Connection Pooling

34. Connection pooling is a place where a set of connections are kept and are
used by the different programers with out creating conncections to the database(it
means there is a ready made connection available for the programmers where he
can use). After using the connection he can send back that connection to the
connection pool. Number of connections in connection pool may vary.
1)How many JDBC drivers are there ?
A) 2
B) 4
C) 3
D) 1
2)Which of the following is false for the Type 1 JDBC bridge driver?
A) A Type 1 driver is a JDBC-ODBC bridge driver
B) This type of driver enables a client to connect to an ODBC database via Java calls
and JDBC
C) Both the database and middle tier need to be Java compliant.
D) ODBC binary code must be installed on each client machine that uses this driver.
Explanation: Neither the database nor the middle tier needs to be java compliant.
3)Which of the following statement is true for the Type 2 JDBC driver?
A) A Type 2 driver converts JDBC calls into calls for a specific database.
B) This driver is referred to as a "native-API, partly Java driver."
C) As with the Type 1 driver, some binary code may be required on the client
machine, which means this type of driver is not suitable for downloading over a
network to a client.
D) All of the above
4)What is the difference between EAR, JAR and WAR file
Answered by Jey on 2005-05-08 11:23:41: In J2EE application modules are
packaged as EAR, JAR and WAR based on their functionality
JAR:
EJB modules which contains enterprise java beans class files and EJB deployment
descriptor are packed as JAR files with .jar extenstion
WAR
Web modules which contains Servlet class files,JSP FIles,supporting files, GIF and
HTML files are packaged as JAR file with .war( web achive) extension
EAR
All above files(.jar and .war) are packaged as JAR file with .ear ( enterprise archive)
extension and deployed into Application Server.
5)Full form of java jar file?
In: JAVA Programming [Edit categories]
JAR = Java ARchive
6)Re: URL of Oracle thin driver.
Topic: JDBC
Luigi Viggiano PREMIUM, Jun 4, 2001 [replies:1]
briefly: jdbc:oracle:thin:@hostname:port:oracle-sid

35. 1. in green the Oracle sub-protocol (can be oracle:oci7:@, oracle:oci8:@,
racle:thin:@, etc...) is related on the driver you are unsign and the protocol to
communicate with server.
2. in red the network machine name, or its ip address, to locate the server where
oracle is running.
3. in blue the port (it is complementary to the address to select the specific oracle
service)
4. in magenta the sid, select on wich database you want to connect.
1) Find Java Archive files using an Eclipse plug-in
jmalasko writes "
Discover JAR Class Finder, a plug-in utility with improved compatibility for Rational
Application Developer,
WebSphere Integration Developer, and Eclipse.
This plug-in finds JAR files containing a given class for the Java build path and helps
fix NoClassDefFound exceptions.
1) Explain about web sphere?
The word web sphere popularly refers to IBM middleware technology products. Web
sphere is known for its turn key operation in e business applications. It has run time
components and tools which can help in creating applications which run on WAS.
WAS refers to web sphere application server.
2) Explain about web sphere commerce?
IBM web sphere commerce has a single platform which offers complete ecommerce
solutions to developers. It can be very productive if you are planning to do business
with consumers, business and indirectly through channel partners. This can be used
to perform business with consumers, business and channel partners altogether.
3) Detail about the architecture of web sphere?
Web Sphere is built on three main components they are
• Database
• J2EE application server
• A web server
The databases which it supports are
• DB2
• Oracle
• Cloudscape
Application server is IBMWAS and the supported web servers are
• IBM server
• Microsoft IIS
• Sun web server
4) State some of the features present in web sphere?
Some of the features which are present in web sphere are: -
• Order management

36. • Web sphere commerce accelerator
• Analytical and business intelligence
• Open standards such as Java, EJB, etc
• Web sphere commerce payments and customer care, etc
5) Explain about IBM Web Sphere edge server?
Web sphere edge server is used to improve the performance of web based systems.
It can be used as forward or proxy server. Basically four components are present in
the web sphere they are Network dispatcher, Caching proxy, Content distribution and
application service at the edge.
6) Explain about extended deployment?
Web sphere application server extended deployment increases the functionality of
the server in two main areas they are manageability and performance. Dynamic
virtualization between servers is possible with the help of XD. A stand alone
distributed cache was added to it under the performance header, it is known as
Object Grid.
7) Explain about the security features present in WAS?
Security model for web sphere is primarily based on JAVA EE security model. It also
depends upon the operating system. User authentication and authorization
mechanisms are also provided in WAS. Light weight third party authentication
mechanism is the main security feature present in WAS.
8) Explain about asymmetric clustering?
Asymmetric clustering applications are primarily used in electronic trading systems
employed in banks. Some of the features are, partitions can be declared during run
time and are usually run on a single cluster at a time. Work specific to a particular
can be routed to that cluster.
9) Explain the various Administrator benefits using Web sphere?
Web sphere almost reduces the work of server administrator as he can manage load
on servers efficiently without any hassles. It also gives him flexibility to divide the
load and applications among different server farms. He can also predict about the
incoming load on servers. Email alerts, restart options, memory leak detection, etc.
10) Explain about caching proxy of IBM Web sphere Edge sphere?
A caching proxy can be configured in forward direction or as a proxy. Content
requested by the user is cached by edge before sending or adhering to the query.
Page fragments arising from JSP or servlets are cached by Edge and the caching
process is slow. Performance and scalability of J2EE applications can be increased by
edge.
11) Explain about the network deployment feature present in WAS?
Managing singletons will be a thing of the past and it also provides hot recovery of
singletons which makes you forget about your GC collected singletons. Transaction
logs can stored on a shared file system. For clustering run time operations

37. deployment manager`s role was eliminated. J2EE failover support and cell
configuration support is also present.
12) Explain about IBM web sphere integration developer?
Web sphere integration developer provides an IDE to build applications based on
service oriented architecture. Web sphere process server and web sphere ESB were
built with WID. WID was built with RAD Eclipse based technology.
13) Explain about compute Grid?
Compute grid is also known as Web sphere batch. Web sphere extended deployment
offers a Java batch processing system called as Compute Grid. This forms an
additional feature to Web sphere network environment. Various features are
provided which help a developer to create, manage and execute batch jobs. Job
scheduler, xJCL, batch container and batch programming controller.
14) Explain about web sphere MQ Real time transport?
This feature is very useful in instant messaging across different clients through
intranet and internet. This supports high volume and high performance across
different clients. It uses the concept of light weight transport which is again based on
IP rather than the queue process.
15) Explain about Web sphere MQ JMS Provider?
Web sphere MQ and Web Sphere Business integration manager Broker are very
useful in providing Java messaging services to wide range of clients (publisher –
subscribe, point to point). Java classes are chiefly responsible for translating the API
calls to API`s defined by web sphere. It is very useful to have knowledge of Web
sphere MQ for proper configuration.
16) Explain the attribute CHANNEL in web sphere MQ?
CHANNEL specifies the name of the server connection channel. Generally this is Web
Sphere MQ network abstraction. The default standard used by CHANNEL is SVRCONN
which is the server connection channel. This server is generally used to communicate
to the queue manager by the client.
17) Is the naming of connection factory independent of the name specified by JMS
client?
Yes, the naming of connection factory is independent of the name specified by JMS
client. This is made possible by WAS (Web sphere application server) with its
resource references. It isolates the application from object names. This feature is
important because it gives us the flexibility to change the administered object
without changing the JMS client code.
Tell me your self
1) Explain us in what way your education background will help you and the
organization?

38. When answering this question explain to him about your education background and
some extra courses you learnt during the process.
You need to correlate your education background with the job opening. It would be
added advantage if you can explain to him about the necessary features of the job.
2) Tell us something about yourself (One of the most common question asked)?
Make sure that you tell about yourself in detail. Keep it small and simple explain to
him about all your interests, previous job, passion, hobbies, projects, etc. Just brief
him about all your interests and passion without going into detail, if asked state him
about it in detail.
3) Why did you choose this specific course or stream of study when there are these
many options available to you?
When answering this question explain to him about why you choose this course or
stream of study. What made you to choose this course, it would be an added
advantage if you speak about the different projects you did. Also state or explain
about your goal and higher education pursuits.
4) What will be the future of this industry?
You need to explain the current trend of the industry and then explain to him about
future developments. This is very important because it shows you that you are going
hand in hand on the developments of the industry.
5) Explain specifically why we need to hire you?
Explain to the interviewer about the necessary skills you have which were mentioned
in the job requirement and also tell him about your team playing skills, soft skills, etc
which can fetch you the job. If you have interest in pursuing higher studies then do
explain about that.
6) Explain us about your previous project and its benefits
As the question states you need to explain to him about your project and its benefits.
Do remember a project is done by a team and it has features such as Environment,
team members, technical descriptions, usage, etc. This is very important as he will
mention to the technical HR about your project.
7) What was the reason you left your previous job?
While explaining this question you need to make sure that you don’t speak about the
negative features of your previous job which made you to leave the company instead
explain about those negative features in a convincing manner and you can state that
those reasons are hindering your growth.
8) What is your goal and what do you like to achieve in the near future?
Explain to him about the goal which you would like to pursue in the near future and
how the company can help you achieve that goal. Have a goal which is reasonable
and achievable because it gives you a feeling of accomplishment.

39. 9) What was your biggest job or project accomplishment?
For this question you would be explaining to him about the most challenging project
you undertook and the benefits you obtained by completing it within the deadline.
This will explain to the interviewer about your necessary skills, management skills
and team play.
10) Can you go to tours often?
When answering this question have it in mind that your answer will be kept in the
record. If you cannot take tours due to various reasons state them in a pleasant
tone. The answer which you give will be kept in the record. Also make it a habit to
take small tours or travelling because every job demands that.
11) What do you know about this organization?
Before answering this question make sure that you do enough research about the
organization before applying to it. Also do remember that the interviewer knows
much more about this organization than you do. Try to have as much information
about the job position also.
12) Did you miss deadlines or target?
Be honest when answering this question because your previous employer will have
everything on record and your current employer may request for it. Explain to
him/her about the deadlines you have met during the process.
1)How to identify unused indexes in DB2 for Linux, UNIX, and Windows
database has gone into production, the existence of too many indexes turns
out to be a cause for decreased database performance. Many indexes mean.
During database application development, developers tend to define a large
number of indexes on tables to guarantee that each and every query performs well.
After application development has been finished and a database has gone into
production, the existence of too many indexes turns out to be a cause for decreased
database performance.
Many indexes mean more work for the database system when executing UPDATE,
INSERT, and DELETE (UID) operations. In addition, regular maintenance activities
like RUNSTATS and REORG also run considerably longer in cases where many
indexes are present. Therefore, to achieve the best database performance, it is
critical to be able to determine which indexes are necessary for query execution and
which indexes you can safely drop without impacting query runtimes. This article
explains several methods that a DB2® for Linux®, UNIX®, and Windows® (DB2
LUW) database administrator (DBA) can use to identify unused and seldom used
indexes.
What is a JAR file?
The JAR file format is based on the popular ZIP file format, and is used for
aggregating many files into one. Unlike ZIP files, JAR files are used not only for
archiving and distribution, but also for deployment and encapsulation of libraries,
components, and plug-ins, and are consumed directly by tools such as compilers and

40. JVMs. Special files contained in the JAR, such as manifests and deployment
descriptors, instruct tools how a particular JAR is to be treated.
A JAR file might be used:
For distributing and using class libraries
As building blocks for applications and extensions
As deployment units for components, applets, or plug-ins
For packaging auxiliary resources associated with components
The JAR file format provides many benefits and features, many of which are not
provided with a traditional archive format such as ZIP or TAR. These include:
Security. You can digitally sign the contents of a JAR file. Tools that recognize your
signature can then optionally grant your software security privileges it wouldn't
otherwise have, and detect if the code has been tampered with.
Decreased download time. If an applet is bundled in a JAR file, the applet's class files
and associated resources can be downloaded by a browser in a single HTTP
transaction, instead of opening a new connection for each file.
Compression. The JAR format allows you to compress your files for efficient storage.
Transparent platform extension. The Java Extensions Framework provides a means
by which you can add functionality to the Java core platform, which uses the JAR file
for packaging of extensions. (Java 3D and JavaMail are examples of extensions
developed by Sun.)
Package sealing. Packages stored in JAR files can be optionally sealed to enforce
version consistency and security. Sealing a package means that all classes defined in
that package must be found in the same JAR file.
Package versioning. A JAR file can hold data about the files it contains, such as
vendor and version information.
Portability. The mechanism for handling JAR files is a standard part of the Java
platform's core API.
Compressed and uncompressed JARs
The jar tool (see The jar tool for details) compresses files by default. Uncompressed
JAR files can generally be loaded more quickly than compressed JAR files, because

41. the need to decompress the files during loading is eliminated, but download time
over a network may be longer for uncompressed files.
The META-INF directory
Most JAR files contain a META-INF directory, which is used to store package and
extension configuration data, such as security and versioning information. The
following files or directories in the META-INF directory are recognized and interpreted
by the Java 2 platform for configuring applications, extensions, and class loaders:
MANIFEST.MF. The manifest file defines the extension- and package-related data.
INDEX.LIST. This file is generated by the new -i option of the jar tool and contains
location information for packages defined in an application or extension. It is part of
the JarIndex implementation and used by class loaders to speed up the class loading
process.
xxx.SF. This is the signature file for the JAR file. The placeholder xxx identifies the
signer.
xxx.DSA. The signature block file associated with the signature file stores the public
signature used to sign the JAR file.
The jar tool
To perform basic tasks with JAR files, you use the Java Archive Tool (jar tool)
provided as part of the Java Development Kit. You invoke the jar tool with the jar
command. Table 1 shows some common applications:
Table 1. Common usages of the jar tool
Function Command
Creating a JAR file from individual files jar cf jar-file input-file...
Creating a JAR file from a directory jar cf jar-file dir-name
Creating an uncompressed JAR file jar cf0 jar-file dir-name
Updating a JAR file jar uf jar-file input-file...
Viewing the contents of a JAR file jar tf jar-file
Extracting the contents of a JAR file jar xf jar-file
Extracting specific files from a JAR file jar xf jar-file archived-file...
Running an application packaged as an executable JAR file java -jar app.jar
--------------------------------------------------------------------------------
what is a connection pool?

42. Connection pooling is a technique used for sharing server resources among
requesting clients. This article focuses on support for connection pooling of both
database resources and non-database resources in a J2EE environment. Siva
examines the JDBC 2.0, JMS 1.02, JNDI 1.2 Standard Extension APIs with regard to
connection pooling and looks at some existing vendor implementations of those APIs.
He then looks at the upcoming J2EE Connector Architecture 1.0 that would support a
vendor-independent/pluggable approach to managing resource connections.
1) How many JDBC drivers ?name them? Answer
There are 4 JDBC drivers are available:
*JDBC-ODBC Bridge Driver:-Popular name is Type-1 Driver.In
this connection some native code or native database client
code must be loaded on each client machine due to this
process it is slower than other drivers.It uses
JDBC-Bridge-ODBC means between JDBC and ODBC one bridge is
work that establise the connection between application and
DataBase... It is suitable for automatic installation and
downloading java technology application is not important.
*Native API partly Java Driver:-Known as Type-2 Driver.It
enables driver converts JDBC calls into calls on the client
API for Oracle or any other databases.This driver need to
load some binary code on client machine like JDBC-ODBC
Bridge Driver.
*Network Protocol Driver:-Known as Type-3 Driver.
*Jdbc net pure Java Driver:-Known as Type-4 Driver.
The JDBC Driver provides vendor-specific implementations of
the abstract classes provided by the JDBC API. This driver
is used to connect to the database.
there are:
Type 1 : JDBC-ODBC Bridge Driver
Type 2: Native API Partly Java Driver
Type 3: Network protocol Driver-
Type 4: JDBC Net pure Java Driver
2) what is JDBC? Answer
JDBC(java Database Connectivity) is an API(Application
program Interfaces), that is useful to write a java program
to connect any database,and retrieve the data form the
database and utilize the data in the java program.
1.Making a connection to a database
2.Creating SQL or MySQL statements
3.Executing that SQL or MySQL queries in the database
4.Viewing & Modifying the resulting records
3) How warnings are retrieved in JDBC? Answer
while using jdbc, warnings can occur at any time
while getting connection

43. while creating statement
while getting resultset, at each , we can get using
getWarnings() method.
->Web Sphere relates to IBM Family.
->We have different servers in market such as:
JBOSS --}
Web Logic -- }Application Servers
Web Sphere --}
Tomcat -- Partial Application Servers i.e not pure Web Server
&Not pure Application Server.
->JBoss is a open source software
->The concepts of Web Logic & Web Sphere are same but only the terminology is
different.
->In 6.0 Version we have 3 types of packages.
1) Express Package --}
2) Base Package --} Used for Stand alone Environment
3) Network Deployment -- Distributed Environment
-> In java we have 3 parts.
1)J2SE (core java)
2)J2EE (servlets, jsp's(web applications) ,Ejb's(enterprise java beans.
3)J2ME
-> We will make the web application as .WAR (web Archieve)file.
-> And we will make enterprise applications as .EAR file.
-> For installation we have 2 modes:
1)GUI.
2)Silent Mode.
Silent Mode there is a file called Response File this is what we have to
customize.
->ServerIndex.Xml file is used to find out the port number.
Servers are listening to this port number, not application.
-> Whenever we change port number and restart the server it will be updated in
portdef, no need to change here again.
Profile: A profile is nothing but an environment where we can create Servers. There
are 3 types:
1) Application Profile.
2) Deployment Profile.
3) Custom Profile.
-> The default profile is Application Server profile.
-> The custom profile will give us an empty node.
-> The soap connecter port number of deployment manager is 8879.
-> Independantly a custom profile will have no use. We have to get connected with
dmgr.

44. -> Before federation we have to check whether, .Dmgr is opening or not.
.Dmgr is under running or not.
In dmgr host we maintain dmgr just to monitoring and configuring the
administration.
->In ND package we have 3 types of Templates:
1) Dmgr Template
2) Default Template
3) Managed Template.
-> By default the dmgr profile won't give any servers. It is not at all a server,
used just to configure.
-> The AppServer gives server1 as default server. In application server we
have no option to create server. It is
just a stand alone profile.
Node: is a collection of servers. it reduces administration burden. It is a single point
of servers. If we start Node, n-number of servers will get started, if we stop all will
be stopped.
Federation: In Dmgr01 we should have an eligible node to create servers but Dmgr
node is not eligible, at that time we can connect App-node which is eligibe to create
servers from the appsrv01 Then we can create servers using App-Node in dmgr01.
If we want to do federation we have to ping the Dmgr Server.
Dmgr was introduced for single point of admin.
In dmgr admin console, number of servers will be there under same
environment.
We can create number of servers under dmgr console using Add-node.
When ever we do federation a node agent will be created to communicate between
Appserv & Dmgr.
Node Agent: It will acts as a communication between which node we are federating.
Cell Profile: is the combination of deployment profile and application profile.
in both 6.0 & 6.1 the cell is available in deployment manager.
Whenever we create cell profile automatically there will be deployment profile &
application profile and federation also will be done automatically.
The complete administration will be under the cell profile only.
Global Security: In 6.0 we have 3 ways to provide security for admin console.
1) Local os user registry.
2) Custom user registry.
3) LDAP (Light Weight Directory Access Protocol) user registry.
2) custom user registry: Here we have to create two files named:
users.registry
groups.registry
We can create this files any where but we have to configure this absolute path to the
application servers.
3)LDAP: It is a mechanism & not a server. Here we are integrating seperate directory
servers.
if SSL is enabled the port number is 636, if it is not enabled 389.
-> In local os user registry we have to create user accounts and that user
accounts have to configure to websphere application servers.

45. where as in the custom user registry specifying user names and passwords in
a normal file and we are specifying the absolute path of that file into the websphere
application server. whenever we are going for LDAP user registry we have to specify
user id & password & type of directory server, port number (default is 389), if SSL is
enabled we have to specify port number as 636 and we have to specify Base
distinguished name which indicates authentication for users and we have to specify
Bind distinguished name and Bind password which specify authorization for user and
we have to select "Advanced Light Weight Directory Access Protocol user registry
settings" there we have to specify user filter classes and group filter classes
(automatically it will be there) and finally we have to restart the server.
->Web Sphere application server is a middleware component.
-> In 3-Tier Architecture we have 3 levels.
In level 1 (Tier-1) we have HTTP server (or web server)
In Tier-2 we have Application server
In Tier-3 we have Data base.
Whenever we integrate database with application server every applications are able
to communicate with the database.
->A database is a collection of data.
-> A schema is a collection of Tables.
-> In oracle 10g & 9i We have only one jar file i.e OJDBC14.JAR (for log) &
Class12.jar (for 9i) and In DB2 we have 3 or more jar files. i.e
DB2JCC.JAR,DB2JCC_LICENSE_C4.JAR, DB2JCC_LICENCE_CIS42.JAR.
-> The .jar file is nothing but a collection of .class files. It is necessary to
communicate with the database. So we should configure this jar files with database.
JDBC: providers create connection between web application server & database server
for communication.But data source provide communication for applications inside
WAS with particular database inside the DB server.
->We can say HTTP Servers as web servers also.
The responsibility of http servers is to serve static content only. It will give
quick response to static content than app servers.
To communicate between http servers & app servers we have a concept
called "PLUG-INS".(it is a intermediatory component)
By using round robin algorithm (default), here we have a concept routing
table, which is taken care by the http server.
-> Plug-ins contain Plugin-cfg.xml contains complete information about
application server environment i.e how many clusters are there, how may cluster
environments are there, weight of cluster etc.
Virtual Host: Here we will have wc-default host port number also. We can create or
change this ports by using Virtual hosts concepts. All applications and application
servers has to listen to this ports.
->If we want to access an application under multiple domains, or by using
multiple ports, (simply multiple domains,multiple ports). After following all the steps
we have to restart the server.
->multiple domain names can access the same application.
->All the applications will go through the http server only at the time of
trouble shooting we can by pass this http server for some purposes.

46. Clusters: A logical group of related components is a "Cluster".
->Here, if server1 fails to deploy one application servers will take care of that,
which is called as clustering but this will not supported by Base & Express.
Q)What is high availability, why we have to go for clusters?
At any cost the application should be available at all times, it should not go
down. To overcome this problems we go for clusters.
->We have 2 types of clusters:
1) Vertical Clusters.
2) Horizontal clusters.
1) Vertical Clusters: Here we are deploying app1 through cluster, so if server1
fails we can access through server2. But if the host i.e, the total physical machine
get crashed then we can not access. This is the disadvantage with the vertical
clusters.
2) Horizontal clusters: Here we are deploying apps in multple hosts or
physical boxes. Here if one host gets crashes, the end user can access.
Hence, to achieve high availability we are going for clusters.
-> coming to performance, vertical cluster gives more performance than the
horizontal because transmission of response takes time.
-> vertical is preferred in development, test environment.Horizantal is used in
production environment.
-> Here if the application is not running under server2 we have to add the
server2 ports into the virtual hosts.
Plugin-cfg.xml: The plugin-cfg.xml contains information about application server
environment like how many clusters, how may cluster members, application uri, port
numbers, routing algorithms, weight of cluster members.
-> An application contains:
Servlets, Jsp's, Html, css, javascript } web resources.
Ejbs} Ejb components.
->if we deploy any application, at that time all web resources will go under
web container and Ejb components will go under Ejb container.
->if any request is looking for web resource, at that time web container itself
will, generate the response.
Tell me about your Day-to-Day activities?
Tell me about the Architecture of Web Application (how it will happen
Workload Management & clustring)
when ther request coming from the browser the webserver will handled that
reuest , It will handled over to the plug-in, then the plug-in will looks in to the
plug-in cfg.xml file for the reuested url and It will redirect the request to the
avaliability of the servers in the cluster. The plug-in mainly perform the work
load management.If any server is processing any request then the plug-in will
route the request to the avaliability of the servers based on their weight and
based on the algorithams.
what are the main point while installing an IHS?
The main use of installing any external web server is to proces the dynamic content
request

47. what the file path of httpd.conf?
/opt/IBM HTTPSERVER/conf/httpd.conf
window
c:programfilesIBM HTTP SERVERconfhttpd.conf
What are Java Programming languages?
Servlets,jsp,ENB,Struts,JSF,Hibernate
How to take back up ? while taking back is it necessary to stop the server?
execute backupConfig.sh command to take the backup ,yes it is required to stop the
servers,by default when you execute this command it will stop all the servers on the
node so yhe partially synchronized information will not be saved .
what are the Deployment ways ? steps ?
1.Hot fix
2.wsadmin
3.AdminConsole
4.Using third party tolls like ,Teamsite ,Cruise Control, MKS etc.
what is soap and soap port?
SOAP is an XML-based messaging protocol. It defines a set of rules for structuring
messages that can be used for simple one-way messaging but is particularly useful
for performing RPC-style (Remote Procedure Call) request-response dialogues. It is
not tied to any particular transport protocol though HTTP is popular. Nor is it tied to
any particular operating system or programming language so theoretically the clients
and servers in these dialogues can be running on any platform and written in any
language as long as they can formulate and understand SOAP messages. As such it
is an important building block for developing distributed applications that exploit
functionality published as services over an intranet or the internet.
what is a webcontainer?
A container that implements the Web component contract of the J2EE architecture.
This contract specifies a runtime environment for Web components that includes
security, concurrency, life-cycle management, transaction, deployment, and other
services. A Web container provides the same services as a JSP container as well as a
federated view of the J2EE platform APIs. A Web container is provided by a Web or
J2EE server
What is the error HTTP 403 indicates and how to solve these issues?
This is due to SSL certificate or some security settings in the server might have
issues.