Improve the quality of the fabrication process. For your orders: Contact Lang Dental Manufacturing Co., Inc. Address: 175 Messner Drive Wheeling, IL 60090 Phone: (800) 222-5264/(847) 215-6622 Fax: (847) 215-6678/(866) 278-8510 Site: http://www.langdental.com/

1. Aquapres
Product Identification
Hydraulic pressure curing unit
Package Contents
Intended Purpose
This product is intended for pressure curing acrylic
resin one case at a time.
Other Materials/Equipment Needed
Water
Instructions for Use
1. Fill pot to overflowing with room temperature
water. Warning: very hot, or boiling water will cause
the plastic bowl to distort and become unusable.
2. When acrylic has gelled, place it (while still on
model) into pot.
3. Place cover on pot. Slide covered pot into frame
until pot reaches pegs.
4. Generate pressure by turning handle on top of unit
in a clockwise motion until 30 psi is generated.
5. Allow acrylic to cure completely, per acrylic
instructions. Pressure does not affect setting time.
6. To open pot: Turn handle counterclockwise until
gauge shows no pressure. Remove pot from frame
and place pot in sink. Push down on the relief valve.
Remove lid.

2. Warranty
Manufacturer warrants this product to be free from
manufacturing defects for one year from date of
purchase. Warranty is void if product is used for other
than intended purpose or other than instructed.
Troubleshooting
If pressure is difficult or impossible to generate, try
one or more of the following suggestions before
contacting manufacturer:
1. Ensure pot is overflowing with water.
2. Apply grease to threads on handle.
3. Secure gasket completely in lip of cup.
4. Make sure needle in gauge moves freely.
Lang Dental Mfg. Co., Inc.
Wheeling, IL 60090-0969
www.LangDental.com
Made in USA
Ph 847-215-6622
Fax 847-215-6678
LDD 49A REV.2
Authorized Representative in EU:
MediMark® Europe
BP 2332
38033 Grenoble Cedex 2
France