2. RETAINING WALL
Basic function – to
retain soil at a slope
which is greater than
it would naturally
assume, usually at a
vertical or near
vertical position
5. Design of retaining wall
retaining walls have primary function of
retaining soils at an angle in excess of the
soil’s nature angle of repose.
Walls within the design height range are
designed to provide the necessary resistance
by either their own mass or by the principles
of leverage.
Design consideration:
1. Overturning of the wall does not occur
2. Forward sliding does not occur
3. Materials used are suitable
4. The subsoil is not overloaded
6. Factors which designer need to take
account
Nature and characteristics of the subsoil's
Height of water table – the presence of water
can create hydrostatic pressure, affect bearing
capacity of the subsoil together with its shear
strength, reduce the frictional resistance
between the underside of the foundation
Type of wall
Materials to be used in the construction
7.
8. Failure of retaining wall (dam) due to water
pressure..
10. Mass retaining walls
Sometimes called gravity walls and rely upon
their own mass together with the friction on the
underside of the base to overcome the
tendency to slide or overturn
Generally only economic up to 1.8 m
Mass walls can be constructed of semi-
engineering quality bricks bedded in a 1:3
cement mortar or of mass concrete
Natural stone is suitable for small walls up to
1m high but generally it is used as a facing
material for walls over 1 m
13. Typical example of mass retaining
walls
MASS CONCRETE RETAINING WALL
WITH STONE FACINGS
14. Cantilever walls
Usually of reinforced concrete and work on the
principle of leverage where the stem is
designed as a cantilever fixed at the base and
the base is designed as a cantilever fixed at the
stem
Economic height range of 1.2 m to 6 m using
pre-stressing techniques
Any durable facing material can be applied to
the surface to improve appearance of the wall
21. Counterfort retaining walls
Can be constructed of reinforced or prestressed
concrete
Suitable for over 4.5 m
Triangular beams placed at suitable centres
behind the stem and above the base to enable
the stem and base to act as slab spanning
horizontally over or under the counterforts
22.
23.
24.
25. Precast concrete retaining wall
Manufactured from high-grade pre cast concrete on the
cantilever principle.
Can be erected on a foundation as permanent retaining
wall or be free standing to act as dividing wall between
heaped materials which it can increase three times the
storage volume for any given area
Other advantages- reduction in time by eliminating
curing period, cost of formwork, time to erect and
dismantle the temporary forms
Lifting holes are provided which can be utilized for
fixing if required
29. Pre cast concrete crib-retaining walls
Designed on the principle of mass retaining
walls
A system of pre cast concrete or treated timber
components comprising headers and stretchers
which interlock to form a 3 dimensional
framework or crib of pre cast concrete timber
units within which soil is retained
Constructed with a face batter between 1:6 and
1:8
Subsoil drainage is not required since the open
face provides adequate drainage.