Heat traced piping requires a means of temperature measurement to assure control of heat input to minimize energy consumption and maximize pipe and fluid temperature.

1. 1A
RTD/Heat Trace Styles
RTD_T14XX-01
A P P L I E D S E N S O R T E C H N O L O G I E S
A D i v i s i o n o f U N I T E D E L E C T R I C C O N T R O L S
180 Dexter Avenue, P.O. Box 9143, Watertown, MA 02471-9143 USA Telephone: 617 923-6966 Fax: 617 926-8411 http://www.appliedsensortech.com
HEAT TRACING RTD SENSORS WITH FIXED (NON-REPLACEABLE) ELEMENTS
How to build a part number:
To order an Applied Sensor Technologies temperature sensor, select the requirements for the categories listed below and fill in the
corresponding boxes with your selection. Don’t see exactly what you need? Give us a call!
style
ASSEMBLY STYLE
T1441 – Heat trace RTD with fixed, non-replaceable element; cast aluminum head with ceramic terminal block and
1/2” NPT conduit connection; head conforms to NEMA 4 requirements; sheath is stainless steel with 90° bend, 0.250”
O.D. with pad for mounting to pipe.
T1441X – Similar to T1441, except explosion-proof terminal head; approved for Class 1, Div. 1, Groups C & D.
NOTES:
• Temperature Range – minimum and maximum operating temperatures -18 to 371°C (-0 to 700°F)
• Sheath Length – 4–1/4” length from pipe to fitting standard (consult AST for additional lengths)
• Element – 3-wire, platinum RTD, Class B, 100 ohms at 0°C (±0.12%); DIN 0.00385
T1441
T1441X
For application assistance and
technical information, contact
Miller Energy, Inc.
Exton, PA USA
800-631-5454
www.millerenergy.com