Recommandé
Contenu connexe
Tendances
En vedette
En vedette (16)
Similaire à Build ultrasonic humidifier in SL
Similaire à Build ultrasonic humidifier in SL (8)
Dernier
Dernier (20)
Build ultrasonic humidifier in SL
- 1. Building In Second Life… How to build a piezoelectric disk for a ultrasonic humidifier in second life.
- 2. Create a hemisphere shape from the create menu…
- 3. Edit the size settings to manipulate the shape into the object you want…
- 4. Click the texture tab on the build menu and click the texture option…
- 5. From the drop down list select a texture and click ok to change the texture of the object…
- 6. Create a ring shape, edit the size to change the shape…
- 7. Align the disk shape so that it sits perfectly in the center of the ring…
- 8. Once the disk is aligned in the center of the ring Hold shift and click the ring to select both objects, Click the link button…
- 9. Building in Second Life… How to build the humidifier’s nebulizer chamber.
- 10. Create a cube shape…
- 11. Edit the size of the cube to change the shape…
- 12. Create a hollow in the shape and change the default hollow shape…
- 13. Create a cylinder shape…
- 14. Edit the sizes to change the shape…
- 15. Create a hollow in the shape…
- 16. Make the shape transparent…
- 17. Align the two shapes, use the orbit zoom pan to change the view to make sure the shapes sit together perfectly…
- 18. Once aligned, hold the shift key and click the second object to select them both…
- 19. Link the two objects so that they move as one object…
- 20. Create a new cube object…
- 21. Edit the sizes to change the object…
- 22. Create a hollow in the shape…
- 23. Create a path cut in the shape by editing the B values under the path cut option…
- 24. Create another path cut in the shape by editing the E value under the path cut option…
- 25. Edit the rotation values to rotate the shape…
- 26. The shape should be sitting with the path cut side facing up…
- 27. Align the first two linked objects to the left side of the path cut shape so that they sit edge to edge…
- 28. Select all the objects and link them…
- 29. Create a new cube shape…
- 30. Edit the sizes to change the shape…
- 31. Align the shape to the right side of the first two linked objects and link them…
- 32. Create a new cube object…
- 33. Edit the sizes to change the shape…
- 34. Align the shape to the back of the object so that it sits edge to edge, select all objects and link them.