1. CURRICULUM VITAE
For civil engineer
EDUCATIONSMohammad
Fathi
Amin
Civil engineer.
Jeddah -Saudi Arabia
00966547671318
Email:
mohammadfathi2311@gmail.com
Nationality:
Egyptian.
Military Status:
Exempted.
Passport:
Valid.
Driving License:
Valid.
Language Skills:
Arabic: mother tongue
English: good
Personal skills:
Ability to work in technical
office.
BSC degree
B.S.C Civil Engineering –2003
Faculty of Engineering –Cairo
University
FE license from NCEES
WORK EXPERIENCES
ETS(distribution zones set up in Jeddah.(From
7/2014
present
a little bit of project
-Project with was about 80 underground chamber at
water pipeline and set up valves and mechanical
instruments and scada equipment
-set up about 10 km PVC water pipe with diameter
300mm in distribution zones in Jeddah
-Project value :100million Saudi ryals.
Owner: national water company (NWC.(-
Contractors , ellawazat , (CWC-. (
Responsibilities
All this items concerning civil works only-
Checking drawings for civil works only-
Interpreting drawings, and working conditions-
-Checking materials if it is as specifications or not.
Checking of quality of work and materials-
Checking quantities of materials which used-.
-Monitoring project and ensure if it as timescale or
not.
Work as main technical advisor.-
Coordinate between owner, contractor-
-planner, quantities surveyors and any other
stockholders.
-Coordinates with facilities to ensure if work as
regulations and lows
-Communicating with owner and their representatives
(architects, engineers and surveyors), including attending
regular meetings to keep them informed of progress.
-Monitoring project day-to-day
-planning the work and efficiently organizing the plant

2. and site facilities in order to meet agreed
deadlines.Ability to work in a team
I hear advices from my
leader.
I have a good personality
for good decisions.
-Checking quality control and safety matters on site.
-resolving any unexpected technical difficulties and
other problems that may arise.
preparing reports as required.-
-Negotiating any technical problems with contractor and
owners.
Jeddah ,ksa
the expertise house for engineering
consultation
)surface water drainage network.(
From
1/2013to
5/2014
a little bit of project
-surface water drainage network.
Work as an executive engineer.-
Project was about under gravity pipe.-
-network which have upper hole and surrounded with
special gravel and all of this warped in geotextile this
system permits to water to implemented in pipes and
prevent soil.
-Project was 5 tenders with total value 250million
Saudi ryals.
Project was kind of rush project.-
-Tender 1: in elmatboly zone and 14th
kilo and el
olayia zone using UPVC pipes 300mm and 500
mm. Length about 15km , depth until 4m.
-Tender 2: in elraya dist., and abrouq el roughama
zone , about 30km , depth until 4m . Using UPVC
pipes Diameters 300mm, 500mm
-Tender3: in alsamer zone bout 35km. depth about
4m . using UPVC pipes ,with diameters
300mm,500mm.
-Tender 4 : in elsanabel zone , length about 30km
,depth until 4m ,diameters 300mm, 500mm.
-Tender5: in zahret el maarred, alagaweed, zone,
about 30km, using UPVC pipes with diameters
300mm, 500mm, depth until 5m
Owner: national water company (NWC.(
Responsibilities

3. Checking drawings.-
Interpreting drawings, and working conditions-
-Checking materials if it is as specifications or not
Checking of quality of work and materials-.
-Checking quantities of materials which used.
-Monitoring project and ensure if it as timescale or
not.
-Work as main technical advisor.
-Coordinate between owner, contractor, planner,
quantities surveyors and any other stockholders
-Coordinates with facilities to ensure if work as
regulations and lows
-Communicating with owner and their representatives
(architects, engineers and surveyors), including
attending regular meetings to keep them informed
of progress;
Monitoring project day-to-day-
-planning the work and efficiently organizing the plant
and site facilities in order to meet agreed deadlines
-Checking quality control and safety matters on site
-resolving any unexpected technical difficulties and
other problems that may arise.
preparing reports as required.-
-Negotiating any technical problems with contractor and
owners.
-Checking as built drawings.
Jeddah, kSA
work as designer in dar el morad badr
Islamic embassy- various of mosques-
commercials tower.(
From
7/2009
to1/2013
a little bit of project
-Design of some mosques and bard Islamic embassy
and commercial tower.
-Participate in design for some buildings.
-Checking drawings.
Interpreting drawings, and working conditions.-
-Work as main technical advisor.
-resolving any unexpected technical difficulties and
other problems that may arise.
preparing reports as required-.
-Negotiating any technical problems with contractor and

4. owners.
fayoum,egypt
Work as civil engineer in aseer educational
building Ksa (building 12 school.(
From
1/2008to
6/2009
Supervision of Installing 12 schools but not all
finished.
Only 2 of them finished.
Responsibilities
Checking drawings.
-Interpreting drawings, and working conditions
-Checking materials if it is as specifications or not.
-Checking of quality of work and materials.
-Checking quantities of materials which used.
-Monitoring project and ensure if it as timescale or not.
Work as main technical advisor.-
-Coordinate between owner, contractor, planner,
quantities surveyors and any other stockholders
-Coordinates with facilities to ensure if work as
regulations and lows
-Communicating with owner and their representatives
(architects, engineers and surveyors), including
attending regular meetings to keep them informed
of progress;
-Monitoring project day-to-day agreed deadlines
-planning the work and efficiently organizing the plant
and site facilities in order to meet
-Checking quality control and safety matters on site
-resolving any unexpected technical difficulties and
other problems that may arise.
-preparing reports as required;
-Negotiating any technical problems with contractor
and owners
aseer,ksa,
Work on Egyptian educational buildingFrom
1/2007to
1/2008
Supervision of Installing one school one hospital-.
-Hospital value was about 10millions Egyptian pounds
School value was about 15millions Egyptian pounds-
Responsibilities

5. Checking drawings.-
Interpreting drawings, and working conditions.-
Checking materials if it is as specifications or not-.
Checking of quality of work and materials.-
Checking quantities of materials which used.-
-Monitoring project and ensure if it as timescale or
not.
-Work as main technical advisor
-Coordinate between owner, contractor, planner,
quantities surveyors and any other stockholders
-Coordinates with facilities to ensure if work as
regulations and lows
•-Communicating with owner and their
representatives (architects, engineers and
surveyors), including attending regular meetings to
keep them informed of progress;
Monitoring project day-to-day-
-planning the work and efficiently organizing the plant
and site facilities in order to meet agreed
deadlines;
-Checking quality control and safety matters on site
-resolving any unexpected technical difficulties and
other problems that may arise.-
-preparing reports as required;
fayoum,egypt
Work on the general Egyptian .co for building
(wastewater network k in elshykh zayd in 6
October governorate-wastewater network in
bashteel in 6 October governorate(
From
1/2005to
1/2007
a little bit of project
-Setting up 2 lift stations.
Set up treatment station-
-Set up gravity pipe line about 20 km with diameter 600
mm ,800 mm
Project value was about 150millionspounds-
Responsibilities
-Monitoring costs.
-Negotiating prices of materials and Wage labor.
Agreeing pricing and costs-.
-Checking drawings.

6. Interpreting drawings, and working conditions-.
Checking materials if it is as specifications or not-.
-Checking of quality of work and materials.
Checking quantities of materials which used-.
-Monitoring project and ensure if it as timescale or not.
Work as main technical advisor-.
-Coordinate between owner, contractor, planner,
quantities surveyors and any other stockholders.
-Coordinates with facilities to ensure if work as
regulations and lows.
•-Communicating with owner and their
representatives (architects, engineers and
surveyors), including attending regular meetings to
keep them informed of progress.
Monitoring project day-to-day.-
-planning the work and efficiently organizing the plant
and site facilities in order to meet agreed
deadlines.
Checking quality control and safety matters on site.
-resolving any unexpected technical difficulties and
other problems that may arise.
preparing reports as required-.
Negotiating any technical problems with contractor and
owners.
work on pb sabbour and (supervision on 4 small
hospitals(
From
11/2003to
1/2005
a little bit of project
-Supervising of rehabilitation of four small hospitals in
elfayoum governorate in Egypt.
Responsibilities
-Checking drawings.
Interpreting drawings, and working conditions-.
Checking materials if it is as specifications or not-.
Checking of quality of work and materials-.
Checking quantities of materials which used-.
-Monitoring project and ensure if it as timescale or
not.
-Work as main technical advisor.
-Coordinate between owner, contractor, planner,
quantities surveyors and any other stockholders.
6october,egypt,

7. -Coordinates with facilities to ensure if work as
regulations and lows.
•Communicating with owner and their
representatives (architects, engineers and
surveyors), including attending regular meetings to
keep them informed of progress.
-Monitoring project day-to-day.
planning the work and efficiently organizing the plant
and site facilities in order to meet agreed
deadlines.
-Checking quality control and safety matters on site.
-resolving any unexpected technical difficulties and
other problems that may arise.
-preparing reports as required.
-Negotiating any technical problems with contractor
and owners.
fayoum,egypt,
Certifications Held
AutoCAD from-engineering
syndicate.
PMP.
FE certification.
Computer Skills
Sap 2000
Primavera
Auto Cad
sewer cad
water cad