จำหน่าย Hydac Filter element (อะไหล่ไส้กรองไฮดรอลิค) บริษัท นิวเมติก ดอทคอม (ประเทศไทย) จำกัด www.นิวเมติก.com/Filter-element/

1. Class Filter Element Technology.
Filter mesh pack
protected
by outersleeve
Use of electrically
conductive plastics
and innovative filter media
The star-pleated filter mesh pack is
enclosed in a stable outer plastic sleeve.
This sleeve distibutes the incoming fluid
evenly over the mesh pack (diffusor
effect). In addition the fluid does not flow
directly through the mesh pack, and this
protects it from pulsating flows. In this
way, the element achieves extremely high
flow fatigue stength values. Moreover,
the mesh pack is protected against
mechanical damage, e.g. when elements
are being installed. Since the outer sleeve
permits overprinting with the customer
logo, it can be used as an advertising
medium for OEMs, thus ensuring spare
parts business. At the same time the
user can rely on the fact that he is always
buying a genuine spare part.
Due to a complete revision of the
materials used, e.g. conductive plastics,
full discharge-capability of the filter
elements was achieved.
Charging of the filter elements during
operation was therefore reduced to an
absolutely uncritical level. This means
that risks such as sudden sparking
and the subsequent formation of black
carbon or sludging of the oil are reliably
eliminated.
High operational reliability,
because the filter element is fully
discharge-capable
High operational reliability,
because the sensitive filter mesh pack
is protected against direct fluid flows
and pulsation
Low energy consumption,
because due the uniform distribution
of the fluid (diffusor effect), a
particularly low ∆p is achieved across
the element
oil
oil
oil
Ease of handling,
because the compact element is
protected against damage in transit
and during its installation
oil
oil
oil
Protection against product piracy
through “brand labeling”
Discharge on a discharge-capable element
oil
Particularly advantageous: The logo is
also perfectly legible when the filter is
dirty, that is, when the element is actually
changed. "Brand labeling" by HYDAC
will result in an enormous increase in
your spare parts business and improve
the process quality through the use of
genuine spare parts.
oil
oil
oil
Öl
oil
No discharge on an element, which is not
discharge-capable
E 7.206.1/03.12
The figure shows elements with customer
logo, which are increasingly used across
all industrial sectors.
oil
51

3. Flexmicron P
(Premium)
Description
The filter elements of the FlexMicron
P (Premium) product line are durable
elements in pleat technology,
manufactured in meltblown or highquality fibreglass technique.
They are used particularly in
applications requiring highest levels
of cleanliness.
Technical Details
General data
Length
Filtration rating
ßx-values
Filtration efficiency
10", 20", 30", 40"
1 ... 40 µm
up to 20,000
up to 99.99 %
Applications
zzHigh-end industrial part washing
systems (aqueous & hydrocarbon
up to 100 °C)
zzFlushing rigs (after part washing
systems)
zzTest rigs (fuel injection, braking and
steering systems)
zzSuperfinishing with cooling
lubricants (honing, grinding, turning,
milling, deburring)
zzOffline filtration in large hydraulic
systems
zzOffline filtration in lubrication
systems
zzFilling systems used in cleanliness
applications
zzMining and metallurgy
zzMetal-forming (e.g. hydroforming)
E 7.624.1/07.12
Special features
zzß-values up to 20,000
zzFiltration efficiency up to 99.99%
zzFiltration rating 1 ... 40 µm
zzVery low starting Δp
zzHigh differential pressure stability
zzExcellent filtration efficiency,
also under pulsation conditions
(pressure and flow rate pulsation)
zzWide range of adapters
zzMaterials: Polyester, glass fibre
zzPleat technology
zzExcellent fluid compatibility
zzCommonly used element geometry
235

4. R (Resistance) factors
Model code
Aqueous
fluids
PES*
Element type
FM-P = Flexmicron P (Premium)
Filtration rating
001 = 1 µm
003 = 3 µm
005 = 5 µm
010 = 10 µm
020 = 20 µm
030 = 30 µm
040 = 40 µm
Filtration rating
Element length
10 = 10"
20 = 20"
30 = 30"
40 = 40"
Seal material
F = FKM (FPM, Viton®)
N = NBR
E = EPDM
Other types of element on request
GF**
10.4
7.5
4.4
1.8
1.8
0.9
0.9
5.4
4.3
3.2
-
1 µm
3 µm
5 µm
10 µm
20 µm
30 µm
40 µm
Oils
* ß > 5,000
** ß > 20,000
Maximum differential pressure Δpmax
and permitted temperature range at the
element:
Filter material
PES
8 bar
6.5 bar
5 bar
Fluid
temperature
Filter material
PES = Polyester
GF = Glass fibre
End cap type
1 = plug-in adapter (1x 222 O-ring), flat end cap, element Ø 64 mm
2 = plug-in adapter (2x 222 O-ring), flat end cap, element Ø 64 mm
3 = plug-in adapter (2x 222 O-ring), flat end cap, element Ø 70 mm
5 = plug-in adapter (2x 222 O-ring), locating spigot, element Ø 70 mm
7 = bayonet (2x 226 O-ring), locating spigot, element Ø 70 mm
10 = open (gasket DOE), element Ø 64 mm
12 = Cuno adapter (hanging elements), element Ø 64 mm
others on request
PES*
32.0
24.0
18.0
17.0
15.0
14.0
14.0
N 40 FM-P 005 - PES 1 F
-10 ... 30 °C
-10 ... 60 °C
-10 ... 100 °C
Sizing
The total pressure drop of the filter
at a certain flow rate is the sum of
the housing Δp and the element Δp.
The housing pressure drop can be
determined using the pressure drop
curves. The pressure drop of the
elements is calculated using the R
factors.
The following calculation is based on
clean filter elements.
Δp [bar] =
R x V (mm²/s) x Q (l/min)
n x l (inch) x 1000
R
V
Q
n
l
R factor
Viscosity (mm²/s)
Flow rate (l/min)
No. of elements
Element length (inch)
=
=
=
=
=
Maximum permitted flow rate
Element length
10"
13"
20"
30"
40"
Maximum permitted
flow rate
20 l/min
26 l/min
40 l/min
60 l/min
80 l/min
E 7.624.1/07.12
Other flow rates on request.
236

5. Dimensions of Flexmicron P Elements
Type 1: Plug-in adapter 1 x O-ring (-222), flat end cap
64
45.5
L2
Type 2: Plug-in adapter 2 x O-ring (-222), flat end cap
L1
Type 3: Plug-in adapter 2 x O-ring (-222), flat end cap
L2
70
45.5
L1
Type 5: Plug-in adapter 2x O-ring (-222), locating spigot
L2
L1
70
45.5
25.5
22.5
14
L1 in mm
263
339
517
771
1025
L2 in mm
18
18
18
18
18
Description
N10FM-P...
N13FM-P...
N20FM-P...
N30FM-P...
N40FM-P...
L1 in mm
L2 in mm
Description
N10FM-P...
N13FM-P...
N20FM-P...
N30FM-P...
N40FM-P...
L1 in mm
L2 in mm
70
N13FM-P...
58.5
L1
Description
N10FM-P...
N13FM-P...
N20FM-P...
N30FM-P...
N40FM-P...
Description
N10FM-P...
Type 7: Bayonet, 2x O-ring (-226), locating spigot
25.5
64
45.5
L2
L1 in mm
263
339
517
771
N20FM-P...
N30FM-P...
N40FM-P...
Description
N10FM-P...
Type 10: Gasket (DOE), open
L1
N13FM-P...
55
64
3
N20FM-P...
N30FM-P...
N40FM-P...
L2 in mm
18
18
18
18
18
1025
263
339
517
771
1025
263
339
517
771
1025
18
18
18
18
18
L1 in mm
241
317
495
749
1003
L1 in mm
254
330
508
762
N40MR-P...-990
L1 in mm
977
6.5
64
65
61
L1
1016
988
Description
N37FM-P...
Type 12: Cuno adapter (suspended elements)
18
18
18
18
18
E 7.624.1/07.12
L1
Description
N10FM-P...
N13FM-P...
N20FM-P...
N30FM-P...
N40FM-P...
237

6. E 7.624.1/07.12
NOTE
238
The information in this brochure relates to
the operating conditions and applications
described.
For applications and operating conditions
not described, please contact the relevant
technical department.
Subject to technical modifications.
HYDAC Filter Systems GmbH
Industriegebiet
D-66280 Sulzbach / Saar
Tel.:+49 (0) 6897/509-01
Fax:+49 (0) 6897/509-846
Internet: www.hydac.com
E-Mail: filtersystems@hydac.com

7. Flexmicron S
(Standard)
Description
The filter elements in the Flexmicron
S (Standard) product line are
SpunSpray depth filter elements
produced using melt-blown
technology.
They are used particularly in
applications where a high level of
fluid cleanliness and material purity is
required.
Technical specifications
General data
Length
Filtration rating
Filtration efficiency
10", 20", 30", 40"
1 ... 90 µm
99.8 %
Applications
zzIndustrial part washing systems
(aqueous up to 60 °C)
zzTransmission test rigs, hydraulic
test rigs
zzSuperfinishing with cooling
lubricants
zzPaints and coatings
zzCooling circuits on machines
zzFilling systems
zzRefineries, chemical industry
zzSemiconductor industry
zzOffline filtration in large hydraulic
systems
zzOffline filtration in lubrication
systems
E 7.625.0/11.10
Special features
zzFiltration rating 1 ... 90 µm
zzMaterial purity
zzCaps welded, not glued
zzWide range of adapters
zzGood price/performance ratio
zzMaterials: Polypropylene,
Polyamide
zzSpunSpray technology, material not
wound
zzHigh level of cleanliness due to
graded depth filter construction
zzHigh contamination retention due
to large depth effect of the filter
material
zzExcellent fluid compatibility
zzStandard element geometry
239

8. R (Resistance) factors
Model code
Aqueous
fluids
N 40 FM-S 005 - PP 1 F
Element type
FM-S = Flexmicron S (Standard)
Filtration rating
001 = 1 µm
003 = 3 µm
005 = 5 µm
010 = 10 µm
020 = 20 µm
030 = 30 µm
040 = 40 µm
050 = 50 µm
070 = 70 µm
090 = 90 µm
Filter material
PP = Polypropylene
PA = Polyamide
End cap type
0 = compression ring (DOE), no cap or seal (Ø 63 mm)
1 = plug-in adapter (1x 222 O-ring), flat end cap (Ø 64 mm)
2 = plug-in adapter (2x 222 O-ring), flat end cap (Ø 64 mm)
10 = gasket (DOE) (Ø 63 mm)
13 = plug-in adapter (2x 222 O-ring), locating spigot (Ø 64 mm)
14 = bayonet (2x 226 O-ring), locating spigot (Ø 64 mm)
others on request
Seal material
F = FPM (Viton)
N = NBR
E = EPDM
PA
274
116
42
15
11
6
3.8
1.9
1.1
0.6
1 µm
3 µm
5 µm
10 µm
20 µm
30 µm
40 µm
50 µm
70 µm
90 µm
Filtration rating
Element length
10 = 10"
20 = 20"
30 = 30"
40 = 40"
PP
321
186
132
99
54
16
12
10
8
6
Maximum differential pressure Δpmax
and permitted temperature range at the
element:
Fluid
temperature
-10..30 °C
-10...60 °C
-10...100 °C
Filter material
PP
PA
7 bar
5.5 bar
3.5 bar
4 bar
2 bar
–
Sizing
The total pressure drop of the filter
at a certain flow rate is the sum of
the housing Δp and the element Δp.
The housing pressure drop can be
determined using the pressure drop
curves. The pressure drop of the
elements is calculated using the R
factors.
The following calculation is based on
clean filter elements.
Other element types on request.
Δp [bar] =
R x V (mm²/s) x Q (l/min)
n x l (inch) x 1000
R = R factor
V = Viscosity (mm²/s)
Q = Flow rate (l/min)
n = No. of elements
l = Element length (inch)
Max. permitted flow rate
Element length
10"
20"
30"
40"
Max.
permitted flow rate
15 l/min
30 l/min
45 l/min
60 l/min
E 7.625.0/11.10
Other flow rates on request.
240

9. Dimensions of Flexmicron S Elements
Designation
N10FM-S...
N20FM-S...
N30FM-S...
N40FM-S...
L1 in mm
254
508
762
1016
Type 1: Plug-in adapter, 1 x O-ring (-222), flat end cap
Designation
N10FM-S...
N20FM-S...
N30FM-S...
N40FM-S...
L1 in mm
263
517
771
1025
L2 in mm
20
20
20
20
Type 2: Plug-in adapter, 2 x O-ring (-222), flat end cap
Designation
N10FM-S...
N20FM-S...
N30FM-S...
N40FM-S...
L1 in mm
263
517
771
1025
L2 in mm
20
20
20
20
Type 10: Gasket (DOE)
Designation
N10FM-S...
N20FM-S...
N30FM-S...
N40FM-S...
L1 in mm
254
508
762
1016
Type 13: Plug-in adapter, 2 x O-ring (-222), locating spigot
Designation
N10FM-S...
N20FM-S...
N30FM-S...
N40FM-S...
L1 in mm
263
517
771
1025
Type 14: Bayonet, 2 x O-ring (-226), locating spigot
Designation
N10FM-S...
N20FM-S...
N30FM-S...
N40FM-S...
L1 in mm
241
495
749
1003
E 7.625.0/11.10
Type 0: Compression ring (DOE), no cap or seal
241

10. E 7.625.0/11.10
Note
242
The information in this brochure relates to
the operating conditions and applications
described.
For applications and operating conditions
not described, please contact the relevant
technical department.
Subject to technical modifications.
HYDAC Filter Systems GmbH
Industriegebiet
D-66280 Sulzbach / Saar
Tel.:+49 (0) 6897/509-01
Fax:+49 (0) 6897/509-846
Internet: www.hydac.com
E-Mail: filtersystems@hydac.com

11. Flexmicron E
(Economy)
Designation
The filter elements in the Flexmicron
E (Economy) product line are depth
filter elements produced using meltblown technology.
They are used particularly in
applications where an average level
of fluid cleanliness and material purity
is required and they provide a costeffective solution.
Technical specifications
General data
Length
Filtration rating
Filtration efficiency
10", 20", 30", 40"
1 ... 90 µm
95 %
Applications
zzIndustrial part washing systems
(aqueous up to 60 °C)
zzPaints and coatings
zzCooling circuits on machinery
zzRefineries, chemical industry
zzProcesses using cooling lubricants
Special features
E 7.626.0/11.10
zzFiltration efficiency 95 %
zzFiltration rating 1 ... 90 µm
zzMaterial purity
zzEnd caps welded, not glued
zzWide range of adapters
zzCost-effective
zzMaterials: Polypropylene
zzSpunSpray technology, material not
wound
zzExcellent fluid compatibility
zzStandard element geometry
zzGood level of cleanliness due to
graded depth filter construction
zzHigh contamination retention due
to large depth effect of the filter
material
zzManufactured without any contact
with oil or silicon, so can be used to
filter paints and coatings
243

12. R (Resistance) Factors
Model code
Aqueous
fluids
PP
N 40 FM-E 005 - PP 1 F
Element type
FM-E = Flexmicron E (Economy)
Filtration rating
001 = 1 µm
003 = 3 µm
005 = 5 µm
010 = 10 µm
020 = 20 µm
030 = 30 µm
040 = 40 µm
050 = 50 µm
070 = 70 µm
Filter material
PP = Polypropylene
End cap type
0 = compression ring (DOE), no cap or seal (Ø 63 mm)
1 = plug-in adapter (1x 222 O-ring), flat end cap (Ø 64 mm)
2 = plug-in adapter (2x 222 O-ring), flat end cap (Ø 64 mm)
10 = gasket (DOE) (Ø 63 mm)
13 = plug-in adapter (2x 222 O-ring), locating spigot (Ø 64 mm)
14 = bayonet (2x 226 O-ring), locating spigot (Ø 64 mm)
others on request
Seal material
F = FPM (Viton)
N = NBR
E = EPDM
Other types of element on request.
37
29
20
11
8
6.8
5.4
4.2
3.1
1 µm
3 µm
5 µm
10 µm
20 µm
30 µm
40 µm
50 µm
70 µm
Filtration rating
Element length
10 = 10"
20 = 20"
30 = 30"
40 = 40"
Maximum differential pressure Δpmax
and permitted temperature range at the
element:
Filter material
Fluid
temperature
PP
4 bar
2 bar
–
-10..30 °C
-10...60 °C
-10...100 °C
Sizing
The total pressure drop of the filter
at a certain flow rate is the sum of
the housing Δp and the element Δp.
The housing pressure drop can be
determined using the pressure drop
curves. The pressure drop of the
elements is calculated using the R
factors.
The following calculation is based on
clean filter elements.
Δp [bar] =
R x V (mm²/s) x Q (l/min)
n x l (inch) x 1000
R = R factor
V = Viscosity (mm²/s)
Q = Flow rate (l/min)
n = No. of elements
l = Element length (inch)
Max. permitted flow rate
Element length
10"
20"
30"
40"
Max.
permitted flow rate
15 l/min
30 l/min
45 l/min
60 l/min
E 7.626.0/11.10
Other flow rates on request.
244

13. Dimensions of Flexmicron E Elements
Designation
N10FM-E...
N20FM-E...
N30FM-E...
N40FM-E...
L1 in mm
254
508
762
1016
Type 1: Plug-in adapter, 1 x O-ring (-222), flat end cap
Designation
N10FM-E...
N20FM-E...
N30FM-E...
N40FM-E...
L1 in mm
263
517
771
1025
L2 in mm
20
20
20
20
Type 2: Plug-in adapter, 2 x O-ring (-222), flat end cap
Designation
N10FM-E...
N20FM-E...
N30FM-E...
N40FM-E...
L1 in mm
263
517
771
1025
L2 in mm
20
20
20
20
Type 10: Gasket (DOE)
Designation
N10FM-E...
N20FM-E...
N30FM-E...
N40FM-E...
L1 in mm
254
508
762
1016
Type 13: Plug-in adapter, 2 x O-ring (-222), locating spigot
Designation
N10FM-E...
N20FM-E...
N30FM-E...
N40FM-E...
L1 in mm
263
517
771
1025
Type 14: Bayonet, 2 x O-ring (-226), locating spigot
Designation
N10FM-E...
N20FM-E...
N30FM-E...
N40FM-E...
L1 in mm
241
495
749
1003
E 7.626.0/11.10
Type 0: Compression ring (DOE), no cap or seal
245

14. E 7.626.0/11.10
Note
246
The information in this brochure relates to
the operating conditions and applications
described.
For applications and operating conditions
not described, please contact the relevant
technical department.
Subject to technical modifications.
HYDAC Filter Systems GmbH
Industriegebiet
D-66280 Sulzbach / Saar
Tel.:+49 (0) 6897/509-01
Fax:+49 (0) 6897/509-846
Internet: www.hydac.com
E-Mail: filtersystems@hydac.com

15. Trimicron Filter Element
N1TM, N3TM
Description
The filter elements in the Trimicron
series have been specially developed
for the combined filtration of:
zzFinest solid particle contamination
zzWater
zzOil ageing product
from hydraulic and lubrication oils in
the bypass flow.
They are a combination of pleated
and SpunSpray depth filter elements.
The filter layers used are produced
using melt-blown technology
(synthetic fibres).
Technical specifications
General specifications
Contamination retention capacity
ISOMTD at ∆P = 2.5 bar
Water retention capacity
Beta value ß 5 (c) @ 2 bar
Filtration rating
Differential pressure at starting point
Permitted fluid temperature range
Storage temperature range
N1
≈ 410 g
N3
≈ 2500 g
≈ 680 ml
> 1,000
≈ 2.2 l
> 1,000
3 µm
< 0.1 bar
-10 ... 80 °C
5 … 40 °C
Applications
zzOffline filtration in lubrication
systems (e.g. in wind turbines)
zzOffline filtration in hydraulic systems
zzTransmission and hydraulic test rigs
Special features
E 7.635.0/12.12
zzExcellent filtration performance
(ß 5 (c) > 1000)
zzLow initial differential pressure
zzHigh contamination retention
capacity
zzFine particle contamination, water
and oil ageing products removed by
depth filter material
zzBroad range of fluid compatibility
zzSimple element change
247

16. Note
Order details
N – 1 – TM – 003 /- F
Nominal flow rate
1 = nominal flow rate 1 l/min
3 = nominal flow rate 3 l/min
The information in this brochure relates to
the operating conditions and applications
described.
For applications and operating conditions
not described, please contact the relevant
technical department.
Subject to technical modifications.
Element type
TM = Trimicron
Filtration rating
003 = 3 µm
Seal material
N = NBR
F = FKM (FPM, Viton®)
Element differential pressure N1TM
3.0
2.5
Q
ΔP in bar
2.0
min
l/
=5
1.5
in
Q = 2 l/m
Q = 1 l/min
1.0
0.5
0
0
200
400
600
800
1000
Viscosity in mm2/s
Element differential pressure N3TM
0.7
in
/m
0.6
Q
l
=6
ΔP in bar
0.5
0.4
0.3
viscosity / (mm2/s)
Q=3
0.2
l/min
in
Q = 1 l/m
0.1
E 7.635.0/12.12
0
248
0
200
400
600
Viscosity in mm2/s
800
1000
HYDAC Filter Systems GmbH
Industriegebiet
D-66280 Sulzbach/Saar
Tel.:+49 (0) 6897/509-01
Fax:+49 (0) 6897/509-846
Internet: www.hydac.com
E-Mail: filtersystems@hydac.com

17. Wombat Filter Element
WB
Description
The Wombat element is a pleated
filter element designed to flow from
the inside outward and filter high
amounts of contamination with high
efficiency.
The Wombat element can be installed
in bag filter housings and replace the
existing filter bag. An adapter kit is
needed for filtration. This only needs
to be installed once and consists of a
retainer basket and seal. Bar magnets
are available as an accessory for
filtering magnetic particles.
Technical specifications
General specifications
Size
Max. differential pressure
Filtration rating
Degree of separation
Filter material
Cap material
Max. temperature
N100WB
2.5 bar
1 - 90 µm
> 99.8 %
Polyester (PES)
Polypropylene (PP)
70 °C
N200WB
2.5 bar
1 - 90 µm
> 99.8 %
Polyester (PES)
Polypropylene (PP)
70 °C
Applications
 Filtering cleaning and processing
liquids
 Pre-filtering fluids in hydraulic and
lubrication systems
 As a working and police filter in
cleaning systems (washing bays)
 As a protective filter in machine
tools
Advantages vs. filter bags
E 7.634.0/11.12
 Very high fluid purity
 Longer service life
 Greater contamination retention
capacity
 Lower loss of pressure
(up to 30%)
 More stable element design
 High temperature stability
 Conical design for faster element
change
249

18. R (Resistance) factors
Model code
N 200 WB 005 - PES F
for water-based media
R factors
Element size
100 = for filter bag size 1
200 = for filter bag size 2
Filtration rating
Element type
WB = Wombat
Filtration rating
001 = 1 µm
003 = 3 µm
005 = 5 µm
010 = 10 µm
020 = 20 µm
030 = 30 µm
040 = 40 µm
A, B, C, D, E = special models (see table below for degree of separation)
Degree of separation for special models A - E:
Smallest particle size (µm) with a degree of separation greater than
C
D
E 7.634.0/11.12
E
250
0.12
0.10
0.08
0.07
0.07
0.06
0.05
0.04
0.04
0.03
0.02
The total pressure drop of the filter
at a certain flow rate is the sum of
the housing Δp and the element Δp.
The housing pressure drop can be
determined using the pressure drop
curves. The pressure drop of the
elements is calculated using the R
factors.
The following calculation is based on
clean filter elements.
Sealing material
F = FPM
N = NBR
B
N 200
0.20
0.18
0.14
0.13
0.13
0.11
0.09
0.08
0.07
0.06
0.05
Sizing
Filter material
PES = Polyester
Model
A
N 100
1 µm
3 µm
5 µm
10 µm
20 µm
30 µm
A
B
C
D
E
> 99.8%
99%
95%
80%
60
70
85
105
135
40
50
65
85
110
30
40
50
70
95
25
30
40
60
85
Δp [mbar] =
R x V (mm²/s) x Q (l/min)
n
R = R factor
V = viscosity (mm²/s)
Q = flow rate (l/min)
n = no. of elements

19. Accessories
Adapter kits
for installing the Wombat element in bag filter housing
Adapter Kit TL-100-F
Ø1
Ø 160
Ø 155
78
302
Adapter Kit TL-200-F
710
L1
L1
Adapter Kit EL-100-F
18
9
Ø 155
317
Adapter Kit EL-200-F
Ø
Adapter Kit EL-100-F, Mat. No. 3683976
for e.g. Eaton Ecoline Housing BG 1
Adapter Kit EL-200-F, Mat. No. 3681844
for e.g. Eaton Ecoline Housing BG 2
Adapter Kit FL-100-F, Mat. No. 3691554
for e.g. Eaton Flowline Housing BG 1
Adapter Kit FL-200-F, Mat. No. 3691595
for e.g. Eaton Flowline Housing BG 2
L1
L1
Ø 178
Ø 160
Adapter Kit TL-100-F, Mat. No. 3674956
for e.g. Eaton Topline Housing BG 1
Adapter Kit TL-200-F, Mat. No. 3549057
for e.g. Eaton Topline Housing BG 2
720
Adapter Kit FL-100-F
317
Adapter Kit FL-200-F
720
12 45
Others on request
Bar magnet insert
for filtering magnetic particles from fluid
L1
Bar magnet insert
N100
L1
Ø 30
Bar Magnet Insert N100
Mat. No. 3633896
for Wombat element N100
Bar Magnet Insert N200
Mat. No. 3601237
for Wombat element N200
196
Bar Magnet Insert
N200
540
E 7.634.0/11.12
Separation Element for Bar Magnet
Mat. No. 3639116
251